Operation Manual

218
A135 Invalid upload setting (FTP PORT/
PASV mode) [notice]
A136 Invalid upload setting (HTTP
notification only/image mode) [notice]
A137 Invalid upload setting (E-mail
notification) [notice]
A138 Invalid upload setting (E-mail
notification authentication mode) [notice]
A274 Event buffer for upload overflowed
[warning]
A275 Image buffer for upload overflowed
[warning]
 Memory card warning
M201 Memory card is write-protected
[warning]
M203 Not enough space on memory card
[warning]
M204 Invalid file removed [warning]
M205 Checking management information file
[warning]
M206 Invalid management information
removed [warning]
M207 Memory card removed without
unmounting [warning]
Description ftp port/pasv mode invalid. uploader
set <pasv> forcibly (A135)
Meaning The PORT/PASV mode setting in
connection with FTP upload is invalid.
The PASV mode was forcibly set.
Description http notice/image mode invalid.
uploader set <image> forcibly (A136)
Meaning The notification only/image mode
setting in connection with HTTP upload
is invalid. The image mode was
forcibly set.
Description mode invalid. uploader set <none>
forcibly (A137)
Meaning The e-mail notification setting is invalid.
Email notification was forcibly
disabled.
Description authentication mode invalid. uploader
set <smtp auth> forcibly (A138)
Meaning The setting for e-mail notification
authentication mode is invalid.
“SMTP_AUTH” was forcibly set.
Description event queue is full (A274)
Meaning Event buffer for upload overflowed.
Countermeasure Make adjustments to reduce the
number of event occurrences.
Description buffer queue is full (A275)
Meaning Image buffer for upload overflowed.
Countermeasure Make adjustments to reduce the
number of event occurrences. Also
adjust the video quality, video size and
frame rate for upload.
Description Readonly filesystem (M201)
Meaning A write-protected memory card is
inserted.
Description There is not available space (M203)
Meaning Insufficient memory card capacity.
Description Invalid file (%1) was removed. (M204)
%1 Name of removed file
Meaning An invalid file was removed.
Description %1 checking management file (M205)
%1 Start | Finish
Meaning The memory card may have been
removed without being unmounted.
Start/finish checking management
information file.
Description Invalid db information(%1)(%2) was
removed(M206)
%1 Name of management information file
containing invalid information
%2 ID of invalid information
Meaning Invalid management information was
removed.
Description Memory card was pulled before
unmount. (M207)
Meaning Memory card was removed when
mounted.