Operation Manual

Camera Viewer

Move by Clicking

If you click outside the frame, the frame will move and center on that point, panning and tilting the camera.

Adjusting Video

Open the [Camera Operation] menu to operate focus, exposure compensation and day/night function.

 Focusing

Focus on the subject.

[Auto]

Focusing is performed automatically.

[Manual]

You can click and hold the (Near) and (Far) buttons to adjust the focus in the near and far directions.

[Fixed at infinity]

You can set the focus so that it is fixed near infinity.

Note

• For cautions on using Focus, see the “Important” section on P. 101.

• For information on the range of focus, please refer to the table on P. 102.

 Setting the Exposure Compensation

Adjust the brightness of the video.

Move the slider to a negative value to make the video darker or a positive value to make the video lighter.

 Switching Day/Night

Set the shooting mode according to the brightness of the installation environment of the camera.

For details on this function, see [Day/Night] on “Setting Page” (P. 105).

HM4x

H730

S30

HM4x

S30

Important

• Cannot be set when [Exposure] is set to [Manual] on the Setting Page (P. 102).

• Cannot be set when [Smart Shade Control] is set to [Auto] on the Setting Page (P. 104).

Important

• Day/night can be set by the administrator and authorized users with privileged camera control.

• For cautions on using Day/Night, see the “Important” section on P. 106.