Owner's Manual

Record on a Regular Basis (Repeating Weekly Schedules)
89
Setting a Recording Schedule
5
 Adjust the Video Quality
[Image Adjustment] tab
(1) [Exposure]
The settings change according to the selected
exposure setting.
•[Not Specified]
Use the camera’s exposure setting.
•[Auto]
Automatically control the exposure.
• [Auto (Flickerless)]
Reduce flicker from light sources, such as
fluorescent lighting. The shutter speed is
automatically adjusted according to the lighting
conditions.
•[Auto (Shutter Priority)]
Specify the shutter speed.
The following exposure compensation setting is
displayed when [Auto], [Auto (Shutter Priority)] or
[Auto (Flickerless)] is selected.
[Compensation]: Specify exposure compensation.
Select negative values to darken the video and
positive values to lighten the video. To disable
exposure compensation, specify [Not
Specified].
[Metering Mode]: Specify the metering mode setting:
[Center-weighted], [Average], or [Spot].
[Shutter]: Specify the shutter speed when [Exposure]
is set to [Auto (Shutter Priority)] or [Manual].
(1)
(3)
(4)
(2)
Metering mode Description
Center-weighted Meters the entire video, focusing on the
center of the video. A correct exposure is
obtained for a subject near the center of the
video, even though the periphery may be
slightly darker or lighter. Use for subjects
that are in the center of the video.
Average Meters an average of the entire scene.
A uniform exposure is obtained even when
the scene has significant differences in
brightness. Use for scenes where, for
example, cars are passing through or
people are entering and exiting.
Spot Meters the center of the scene.
The correct exposure is obtained for a
subject near the center of the scene,
irrespective of the brightness of the
periphery. Use if the subject is lit by a
spotlight or is backlit, where the exposure
should be adjusted to the center of the
scene.