User manual

Menu Options
107
[Æ Recording Setup] menu
[Available Space in Memory]/[Used Space in Memory]: Displays a screen where you can verify how much
of the SD card is currently available for recording or how much is in use (« total recording time and
ª total number of photos).
• Estimated figures about available clip recording time and available number of photos are
approximate and based on the video configuration currently in use and a photo size of 1920x1080.
• You can also check the SD card's Speed Class.
Menu item Setting options A
[¸ Resolution] [3840x2160 (150 Mbps)], [1920x1080 (35 Mbps)],
[1920x1080 (17 Mbps)], [1280x720 (8 Mbps)]
 – 34
[¸ Frame Rate] [¼ 59.94P], [» 29.97P], [º 23.98P]  – 34
[Recording Media] [v Rec Media for Movies]:
[
6 Mem. Card A], [7 Mem. Card B]
 – 29
[{ Rec Media for Photos]:
[
6 Mem. Card A], [7 Mem. Card B]
 –
[Dual/Relay
Recording]
[v Standard Recording], [4 Dual Recording],
[ Relay Recording] (or [ Relay Recording])
 – 29
[Slow & Fast Motion] [OFF], [x0.4], [x0.5], [x0.8], [x2], [x4], [x10], [x20], [x60], [x120],
[x600], [x1200]
 – 35
[Available Space in
Memory]
[6], [7]  – –
[Used Space in
Memory]
[6], [7] –  –
[Initialize 8] [6 Mem. Card A], [7 Mem. Card B]   29
[Rec Command] [i On], [j Off]  – 32
[HDMI Time Code] [i On], [j Off]  – –
[Time Code Mode] [ Preset], [ Regen.]  – 61
[Time Code Running
Mode]
[ Rec Run], [ Free Run]  – 61
[DF/NDF] [ DF], [ NDF]  – 63
[Initial Time Code] 00:00:00.00 to 23:59:59.29, [Reset]  – 62
[User Bit Type] [ Setting], [ Time], [ Date];
[i]: user bit input screen (00 00 00 00
to FF FF FF FF).
 – 64
[Color Bars] [j Off], [ SMPTE], [ ARIB]  – 72
[1 kHz Tone] [ü –12 dB], [þ –18 dB], [ÿ –20 dB], [j Off]  – 72
[MP4 Clip / Photo
Numbering]
[m Reset], [n Continuous]   –
[OSD Recording] [ / / Time Code/Date/Time], [ / Date/Time],
[ Time Code], [ Time], [ Date], [
j Off]
 – 63
[OSD Recording
Position]
[ Top Left], [ Top Right], [ Bottom Left], [ Bottom
Right]
 – 63