User manual

Menu Options
109
[Notification Sounds]: A beep will accompany some of the camcorder’s operations.
• While pre-recording (A 73) is activated, the camcorder will not emit any notification sounds.
[£ Display Setup] menu
[Output Status]: Displays a screen where you can verify the standard of the output signal from the
HDMI OUT terminal.
[LCD Brightness]: Adjusts the brightness of the LCD screen.
• Changing the brightness of the LCD screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
[LCD Backlight]/[VF Luminance]: Sets the screen to one of four backlight levels (for the LCD screen) or
two luminance levels (for the viewfinder).
• Changing the brightness of the screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
• Using a brighter backlight/luminance setting will shorten the effective usage time of the battery
pack.
[LCD Mirror Image]: When this setting is set to [i On], this function reverses the image on the screen
horizontally when you rotate the LCD panel 180 degrees toward the subject. In other words, the
screen will show a mirror image of the subject.
[Speaker
Volume]
,
0-15 (8)
–   94
[Notification
Sounds]
[÷ High Volume], [ø Low Volume], [j Off]    –
Menu item Setting options A
[HDMI Max
Resolution]
[3840x2160]*, [1920x1080], [1280x720(59.94P)]
* mode only.
  99
[HDMI Scan Mode] [ P], [ PsF (Forced 1080i)]   99
[Output Status] –   –
[LCD Brightness]   –
[LCD Backlight] [ Max Brightness], [ Bright], [ Normal],
[Dim]
  –
[VF Luminance] [ High], [ Normal]   –
[LCD Mirror Image] [i On], [j Off]  – –
[Output Onscreen
Displays]
[i On], [j Off]   –
[Onscreen Markers] [j Off], [4 Level (Gray)], [3 Level (White)],
[6 Grid (Gray)], [5 Grid (White)], [ 4:3 (Gray)]
,
[ 4:3 (White)]
 – –
[Distance Units] [. meters], [/ feet]   –
Menu item Setting options v y } A
ØÙ