User manual

Menu Options
111
* Option available only when the optional GP-E2 GPS Receiver is attached to the camcorder.
[Auto Power Off]: In order to save power when the camcorder is powered by a battery pack, it will
automatically shut off if left without any operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto Power Off] will appear.
[Battery Info]: When you are using a battery pack that is compatible with Intelligent System, this option
displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time ( mode) or playback time ( mode).
• If the battery pack is depleted, the battery information may not be displayed.
[GPS Auto Time Setting]: When the optional GP-E2 GPS Receiver is attached to the camcorder, you
can have the camcorder automatically set the [Date/Time] setting based on the information acquired
from GPS. For more details, refer to the receiver's instruction manual.
[GPS Information Display]: When the optional GP-E2 GPS Receiver is attached to the camcorder, this
function allows you to view GPS information. For more details, refer to
Viewing GPS Information in the
receiver's instruction manual.
[Certification Information]: This displays select certification information that apply to this camcorder.
[Firmware]: You can verify the current version of the camcorder’s firmware. This menu option is usually
unavailable.
[Reset All]: Resets all of the camcorder’s settings.
[USB Mode] [ Video Output (UVC)], [ GP-E2]   –
[GPS Auto Time
Setting]*
[j Disable], [i Auto Update]  – –
[GPS Information
Display]*
–  – –
[Certification
Information]
–   –
[Firmware] –  – –
[Reset All] [No], [Yes]   –
Menu item Setting options A