User manual
Table Of Contents
- Highlights of the Camcorder
- Table of contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Clips and Photos
- Video Configuration: Resolution, Bit Rate and Frame Rate
- Slow & Fast Motion Recording
- Shooting Modes
- Exposure Adjustment
- Automatic Gain Control (AGC) Limit
- White Balance
- Using Looks
- Zooming
- Focus Adjustment
- Image Stabilization
- Setting the Time Code
- Setting the User Bit
- Recording Audio
- Using Headphones
- Color Bars/Audio Reference Signal
- Pre-Recording
- Onscreen Displays
- Using the Optional RC-V100 Remote Controller
- Web Camera Function
- Using the GP-E2 GPS Receiver
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Saving Clips
- 8. Additional Information
Custom Picture Settings
85
Replacing a File in the Camcorder with a File on a Card
1 Select [Load].
i > [Save / File 7] > [Load]
2 Select the file with the settings that you want to replicate and then select [OK].
• The file in the camcorder will be overwritten by the one on the card.
3 When the confirmation message appears, press SET.
Available Custom Picture Settings
Menu items Setting options and additional information
[Gamma/Color Space] [BT.709 Normal / BT.709], [BT.709 Standard / BT.709]
Combination of gamma curve and color space settings that affects the
overall look and color space of the image.
Gamma curve
[BT.709 Normal]: Standard picture for playback on TV monitors.
[BT.709 Standard]: Setting suitable for playback on TV monitors.
Produces a more faithful black gradation in the shadows (dark areas
of the image) than with the [BT.709 Normal] setting.
Color space
[BT.709]: Standard color space that is compatible with ITU-R BT.709
specifications.
[Color Matrix] [Video], [Neutral]
The color matrix affects the overall color tonality of the image.
[Video]: Reproduces colors with a contrast suitable for TV broadcasting.
[Neutral]: Reproduces neutral colors.
[Black]
[Master Pedestal] –50 to 50 (±0)
Increases or decreases the black level. Higher settings will make dark
areas brighter but decrease contrast.
[Master Black Red],
[Master Black Green],
[Master Black Blue]
–50 to 50 (±0)
These settings correct the color cast in blacks.
[Black Gamma]
[Level] –50 to 50 (±0)
Standard
Standard
Normal
Normal
Output