User manual
Table Of Contents
- Highlights of the Camcorder
- Table of contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Clips and Photos
- Video Configuration: Resolution, Bit Rate and Frame Rate
- Slow & Fast Motion Recording
- Shooting Modes
- Exposure Adjustment
- Automatic Gain Control (AGC) Limit
- White Balance
- Using Looks
- Zooming
- Focus Adjustment
- Image Stabilization
- Setting the Time Code
- Setting the User Bit
- Recording Audio
- Using Headphones
- Color Bars/Audio Reference Signal
- Pre-Recording
- Onscreen Displays
- Using the Optional RC-V100 Remote Controller
- Web Camera Function
- Using the GP-E2 GPS Receiver
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Saving Clips
- 8. Additional Information
Video Output Configuration
97
External Connections
Video Output Configuration
The video signal output from the HDMI™ OUT terminal depends on the clip's video configuration and
on various menu settings. The video signal output can also change depending on the capabilities of
the connected monitor.
Video Output Configuration (Recording)
1
> [£ Display Setup] > [HDMI Scan Mode] setting.
2
> [£ Display Setup] > [HDMI Max Resolution] setting.
3
59.94P, during slow & fast motion recording.
4
Only when the frame rate is set to 59.94P. Automatically selected depending on the capabilities of the
connected monitor.
Operating modes:
Recording video
configuration
Scan mode
setting
1
Maximum
resolution
setting
2
Video output configuration
Resolution Frame rate Resolution Frame rate Color sampling
3840x2160
29.97P
23.98P
P
1920x1080 1920x1080
Same as that for
video
configuration
3
YCbCr 4:2:2
8 bit
1280x720
(59.94P)
1280x720 59.94P
PsF — 1920x1080 59.94i
1920x1080
59.94P
29.97P
23.98P
P
1920x1080
1920x1080
720x480
4
Same as that for
video
configuration
3
YCbCr 4:2:2
10 bit
1280x720
(59.94P)
1280x720 59.94P
PsF — 1920x1080 59.94i
1280x720 59.94P — — 1280x720 59.94P
YCbCr 4:2:2
10 bit
6
External Connections