Photo Application Version 34 Instruction Manual Y P O C English
Contents Read This First ........................................................................................................... 4 Checking Supplied Accessories ............................................................................ 4 System Requirements ............................................................................................... 5 What is Photo Application? ...................................................................................... 6 Windows ..........................
Running a Slide Show ......................................................................................... 60 Adding Sound to a Still Image.............................................................................. 62 Reviewing and Changing the Owner Name of the Camcorder............................ 63 Uninstalling the Software ........................................................................................ 64 Uninstalling ZoomBrowser EX .......................................................
Read This First Disclaimer • While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.
System Requirements Install the software on a computer meeting the following minimum requirements. OS: Computer Model: CPU: RAM: Interface: Free Hard Disk Space: Display: Windows 7 Windows Vista (including Service Pack 1 or 2) Windows XP (Service Pack 2 or 3) * Proper operation is not guaranteed on an OS that has been upgraded from a previous version. Computers that come with above OS preinstalled and have built-in USB ports. Pentium 1.
What is Photo Application? Photo Application allows you to download still images you recorded with the camcorder to a computer and manage, print, and edit them.
Windows CameraWindow After you connect the camcorder to your computer, you can use CameraWindow to download still images to the computer. Furthermore, you can delete still images saved on the camcorder, without having to download them to the computer, and you can upload still images from the computer to the camcorder ( 56). You can also confirm and change the owner's name of the camcorder you specify ( 63). Refer to Starting CameraWindow ( 28) for launching the software.
[Organize Images on Camera] Window Delete still images saved on the camcorder, without having to download them to the computer, and upload still images from the computer to the camcorder.
[Import Images from Camera] Window Return to the CameraWindow menu screen. Display the Help menu. Configure Preferences settings (camcorder owner's name and download destination, etc.). Adjust the size of the thumbnails. Toggle the shooting date/time and file name displays. Windows Y P O C Select all still images. Clear still image selections. Download images to the computer.
[Organize Images on Camera] Window Return to the CameraWindow menu screen. Display the Help menu. Configure Preferences settings (camcorder owner's name and download destination, etc.). Adjust the size of the thumbnails. Toggle the shooting date/time and file name displays. Y P O C Upload selected still images to the camcorder. Delete still images on the camcorder.
Main Window ZoomBrowser EX is a software program used for organizing, printing and editing the downloaded still images. If you wish to start ZoomBrowser EX without connecting the camcorder or card reader/writer, double-click the on the desktop, or click the Windows [start] menu and select [All Programs] [Canon Utilities] [ZoomBrowser EX] and [ZoomBrowser EX]. To exit ZoomBrowser EX, click or select [Exit] from the [File] menu.
2 Folders Area You can select a folder to be displayed in the Browser Area. In the [Last Acquired Images] panel, the newly downloaded still images are placed into virtual folders classified by recording date. In the panel below, the folders where the downloaded still images are actually saved in are displayed. Selecting the [Favorite Folders] tab shows only the folders that are registered as favorites. The [All Folders] tab shows all available folders.
5 View Mode You can select the view mode of images in the Browser Area. [Zoom Mode]: The images in the selected folder are shown as thumbnails. Y P O C [Preview Mode]: Double clicking the folders at the bottom of the window opens the folder and shows a large still image in the folder along with detailed information. You can change file name and comments. To display another image, click [Previous]/[Next] or select an image shown at the bottom of the window.
6 Command buttons 1 1 View Image 2 14 Properties 2 3 4 5 6 Displays a selected image in the [Image Viewer] window. Displays properties of the selected still image. When you select a different image while the [Properties] window is open, the information switches to the one of the selected image. The [Properties] window cannot be displayed in [Preview Mode]. Y P O C 3 Slide Show Displays still images in a slide show.
[Image Viewer] Window The [Image Viewer] window appears when you select an image and click [View Image] or double-click an image. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 Previous/Next Windows Y P O C Displays the previous/next image in the current folder. 2 Zoom In/Zoom Out Enlarges/Reduces a still image. 3 Pan When the image is larger than the window, you can move the image in the desired direction. 4 Print Prints the selected still image. Refer to [Photo Print] ( 37).
10 Fit to Window Matches the image size to the size of the Image Viewer Window. 11 Restore Restores the standard display size. 12 Zoom Slider Allows you to enlarge/reduce the displayed image. 13 Show Image Full Displays an image in full screen size. Screen 14 Change the Star Allows you to change the star rating. Rating Windows 7/Windows Vista: The star rating set using ZoomBrowser EX is not related to the “Rating” setting in Windows Photo Gallery and Windows Explorer.
[Auto Adjustment] Window Select [Auto Adjustment] from the [Edit] menu, or click the icon and select [Auto Adjustment]. Use this to automatically correct the color balance of the still image. Y P O C Select [Color/Brightness Adjustment] from the [Edit] menu, or click the and select [Color/Brightness Adjustment]. Use this to adjust the brightness, saturation, contrast, intensity levels, tone curve and RGB of the still image.
[Sharpness] Window Select [Sharpness] from the [Edit] menu, or click the icon and select [Sharpness]. Use this to emphasize and clarify the outlines of people and objects. [Trim Image] Window Y P O C Select [Trim] from the [Edit] menu, or click the icon and select [Trim]. Specify the area in the still image to crop and click [Trim Image] to trim the image.
[Insert Text] Window Select [Insert Text] from the [Edit] menu, or click the icon and select [Insert Text]. Use this to write text on still images. These image correction tools can be selected by clicking [Edit] [Edit Image] in Task Area of the main window.
Installing Photo Application Be sure to install Photo Application before connecting the camcorder to the computer. You must have authorization as a Computer System Administrator to install programs. Your digital video camcorder is equipped with the standard Picture Transfer Protocol (PTP). This protocol enables you to download still images by simply connecting the camcorder to a computer with the USB cable (applications such as the [Scanner and Camera Wizard] start automatically).
• Windows XP: The folder appears automatically. Double-click the [setup.exe] icon. If the folder does not open automatically, use the following procedures to display it. 1) Select [My Computer] from the [start] menu. 2) Right-click the CD-ROM icon and select [Open] from the displayed menu. 3) Double-click the [setup.exe] icon. Depending on your computer’s settings, the file extension “.exe” may not appear. 3 4 5 Select your country or region. Select your language.
7 8 Review the installation settings and click [Install]. Read the license agreement and click [Yes] to accept the terms and to start installation.
9 Click [Next]. 10 When the installation is complete, make sure [Restart Y P O C Windows computer immediately (Recommended)] is selected and then click [Restart]. When you do not need to restart the computer, the [Finish] screen will be displayed. Click [Finish]; remove the / / / / / Instruction Manual/Photo Applications Ver. 34/Music Data Disc / / Photo Applications Ver. 34/Music Data Disc from the CD-ROM drive, and proceed to Before Downloading Still Images ( 25).
11 When the computer has restarted and the regular desktop screen is displayed, remove the / / / / / Instruction Manual/Photo Applications Ver. 34/Music Data Disc / / Photo Applications Ver. 34/Music Data Disc from the CD-ROM drive. When installation is complete, remove the / / / / / Instruction Manual/Photo Applications Ver. 34/Music Data Disc / / Photo Applications Ver. 34/Music Data Disc before you connect the camcorder to the computer.
Before Downloading Still Images Connecting the Camcorder to a Computer Be sure to install Photo Application before you connect the camcorder to the computer. Make sure the camcorder is being powered using the power adapter before connecting it to a computer. Connect the USB cable directly to one of the computer’s main USB ports. The interface may not function correctly if the camcorder is connected via a USB hub.
4 Attach the supplied USB cable to the computer’s USB port and the camcorder’s USB Terminal. • Restart the computer if you are prompted to restart it the first time you connect the camcorder to the computer. • A window appears allowing you to select an application program to start. • For instructions on how to start ZoomBrowser EX and download images to the computer, see Downloading Still Images ( 27).
Observe the following precautions when the camcorder’s access indicator is flashing. Failure to do so may cause data to become corrupted. - Do not remove the memory card or detach the USB cable. - Do not turn off the camcorder or the computer. - Do not switch between the shooting and playback modes. The still images you recorded and/or downloaded to the hard disk are important original data files. Create a copy of the file first before working on it on your computer.
Starting CameraWindow 1 2 Connect the camcorder to the computer ( 25). Select [Canon CameraWindow] and click [OK]. • Windows 7 / Windows Vista: When the [AutoPlay] window appears, click [Downloads Images From Canon Camera using Canon CameraWindow]. • If a camcorder and card reader are connected at the same time, a dialog appears allowing you to select the camcorder model. Confirm that [Canon Camera] or your camcorder model name is displayed and click [OK]. Y P O C • The CameraWindow menu screen opens.
Downloading Still Images to the Computer You can select a downloading method in the [Import Images from Camera] window. Downloading Untransferred Images Download only the images not yet imported to the computer. 3 Connect the camcorder to the computer. Click [Import Images from Camera] in the CameraWindow menu screen. Y P O C Click [Import Untransferred Images]. Windows 1 2 When the download completion screen appears, click [OK] to close the CameraWindow screen.
Downloading Selected Images Download only the images that you select. 1 2 Click [Import Images from Camera] in the CameraWindow menu screen. Click [Select Images to Import].
Select images for download in the [Import Images from Camera] window, and click the [Import] button. When the download completion screen appears, click [OK] to close the CameraWindow screen. The downloaded images will appear in the main window of ZoomBrowser EX.
Downloading All the Images on the Camcorder Download all the images saved on the camcorder. 1 2 Click [Import Images from Camera] in the CameraWindow menu screen. Click [Import All Images]. Y P O C When the download completion screen appears, click [OK] to close the CameraWindow screen. The downloaded images will appear in the main window of ZoomBrowser EX.
Using a Card Reader/Writer Select a download method in the image download window. The basic operations are the same as when you connect the camcorder to the computer. Follow the procedure below to open the CameraWindow. For instructions on how to connect the card reader/writer, refer to its manual. If you are using SDHC cards, you need to use a card reader/writer compatible with SDHC cards.
Auto-Downloading 1 Click [Download Images]. • For instructions on how to set the Auto-download settings, see AutoDownloading Settings ( 34). • Click [Exit] to close the window after downloading images. Auto-Downloading Settings Select the setting for downloading images by operating your computer. You can change the image type and the destination folder. 1 34 Click [Preferences].
Configure the settings and click [OK]. Y P O C The window below will be displayed when you select [Perform selected processes consecutively] or [Select] under [Action After Download]. Select a process to perform after the image is downloaded, and click [OK].
Downloading the Selected Still Images from ZoomBrowser EX 1 2 Click [Lets you select and download images]. ZoomBrowser EX opens. In ZoomBrowser EX, select the image you wish to download and click [Image Download]. • Clicking on 2 images while holding down the [Shift] key selects also all images between the 2 images. • Clicking on different images while holding down the [Ctrl] key selects multiple images. A blue frame appears around the selected image.
Printing Still Images You can select one of the following 2 methods to print still images. • [Photo Print] - Prints one still image per page. • [Index Print] - Prints selected images in rows with file names and image information. You can select the program to use for printing by clicking [Print & Email] in the main window and selecting [Print Using Other Software]. [Photo Print] 2 Click [Print & Email] in the main window and click [Photo Print].
3 Specify the print settings and click [Print]. Selects the printer. Sets the paper size settings. Y P O C Click this button to switch between still images if multiple images are selected. Sets the number of print copies of the displayed image. Sets the shooting date/time imprint and color settings.
[Index Print] 2 Click [Print & Email] in the main window and click [Index Print]. Select the still images you wish to print and click [Printer and Layout Settings].
3 Specify the print settings and click [Print]. Rotates still images. Sets the paper size and orientation. Click this to use the trimming function (crops a portion of the still image). Selects the printer. Y P O C Click these buttons to switch between pages. Sets the print settings for shooting information, comments, headers, footers and page numbers. Sets the number of rows and columns. Sets the number of print copies of the contact sheets.
Organizing Images Applying Star Ratings and Keywords This task allows you to apply ratings to your images from one star to three stars. The star rating can be used as one of the search conditions, or for the selection of images to be displayed in the Browser Window. The keyword can be used as one of the search conditions. 2 Select the image to which you wish to apply the star rating or keyword, and select [View/Modify Keywords] from the [Tools] menu.
Classifying the Images This task allows you to classify selected images according to the shooting date. 1 Click [View & Classify] in the main window. 2 Click [Classify into Folder]. 3 42 Y P O C Select the images you wish to classify and click [Specify Classification Settings].
Specify the folder structure and the saving folder and click [Finish]. The selected images are classified into the specified folder.
Renaming Multiple Files This task allows you to rename multiple files at the same time, or to rename and copy multiple files. 1 Click [View & Classify] in the main window. 2 Click [Rename Multiple Files]. 3 44 Y P O C Select the images you wish to rename and click [Specify Rename Settings].
Specify the settings and click [Finish]. Placing a check mark here makes copies of images with new names. The name of the original images will not be changed. To rename a folder, select a folder, and open the [Rename Folder] window by selecting [Rename] from the [File] menu. Input the new name, and click [OK].
Searching for Images This task allows you to search for images by star rating, modification date, shooting date, comment or keywords. 1 2 Click [View & Classify] in the main window. You can also search for images by clicking [Search] on the Application Tool Bar. Skip to step 3. Select folders and images from which you wish to search and click [Search].
3 Specify the search conditions and click [Start Search]. 4 Click [Finish]. Y P O C • To change the search parameters and perform another search, click [Specify Search Conditions] and repeat steps 3-4. Organizing Images Windows • The search results are displayed as thumbnails. • Select at least one search condition.
• The images of the search result are displayed in the [Search Results] folder. You can print or copy these images to another folder. Folders Area The searched images will remain in this folder until ZoomBrowser EX is closed or another search is performed, but if you delete an image in this folder, the corresponding original image will be deleted as well.
Exporting Images You can change the data type for selected still images and movies and save them as new files. You can also export selected movies and still image properties to a text file or copy and rename movies and still images. Furthermore, you can export still images for use as a screen saver or a wallpaper. Changing the File Type and Saving 1 Click [Export] in the main window. 2 Select the export type. Y P O C 53).
3 Select images and click [Specify Export Settings]. 4 Specify the export settings and click [Finish]. The window varies depending on the selected export type in step 2. When you have selected [Export Still Images]: You can convert still images to another file type, resize and save them as new files. You can select the file type from BMP, JPEG and TIFF. You can also specify a prefix to be added to the exported still images.
When you have selected [Export Shooting Properties]: You can select the information you wish to export and save as a text file. When you have selected [Export as a Screen Saver]: You can export and save the image as a screen saver.
When you have selected [Export as a Wallpaper]: You can export and save the image as Windows wallpaper. This task cannot be performed if you have selected multiple images.
Saving on CD-R/RW Discs You can copy and save images to CD-R or CD-RW discs. The shooting information is copied along with the images. This function can only be used on a computer that came with a CD-R/RW drive as standard equipment. 3 Place a CD-R/RW disc in the computer’s CD-R/RW drive. If the following window appears, click [Cancel]. Y P O C Windows 1 2 Click [Export] in the main window.
4 5 Click [Backup to CD]. Select the folders or images you wish to save and click [Specify Backup Settings].
Set the backup settings and click [Start Backup]. The disc will be ejected from the drive when copying is complete. You can add images to a CD-R/RW disc that already contains images.
Uploading Still Images to the Camcorder You can copy still images saved on the computer to the camcorder. 1 2 3 4 Connect the camcorder to the computer ( 25). The still images will be added to the memory selected for the playback of still images (built-in memory or memory card). Click [Organize Images on Camera] [Organize Images] in the CameraWindow menu screen. Click [Upload]. Y P O C Select the still images you wish to save and click [Open].
Deleting Still Images on the Camcorder Organizing Images on the Camcorder 2 Click [Organize Images on Camera] [Organize Images] in the CameraWindow menu screen. Click the still image you want to delete, and click [Delete]. Y P O C • Still images cannot be restored once they are deleted.
Using Various Functions Attaching Still Images to E-mail Messages You can attach selected still images to an e-mail message. If necessary, you can make the image file size smaller. 1 Click [Print & Email] in the main window. 2 Click [Email Images]. 3 58 Y P O C Select the still images you wish to send and click [Change Image Size].
Select image size and quality, and click [Finish]. • If you selected [Using the recommended settings.], your e-mail software starts and the selected still images appear as an attachment in the message window. Input address, subject and your comments and send the message. • E-mail software not supporting MAPI does not start automatically. In this case, select [Save to Folder] in the [Custom Settings] screen and select a destination folder for the still images. • If you select [Using custom settings.
Running a Slide Show You can view selected still images in a slide show. 1 Click [View & Classify] in the main window. 2 Click [View as a Slide Show]. 3 60 You can also view a slide show by clicking [Slide Show] on the Application Tool Bar. Skip to step 4. Y P O C Select the images and click [Setup Slide Show].
5 Select the slide show settings. • [Image Size]: Select the size of the still images. • [Image Information]: Select to show image information such as file name or title. • [Advance to Next Slide]: Select to advance manually or automatically. When you select “Every 3 second(s)”, you can select the interval in the control below (from 1 to 120 seconds). • [Loop]: Select to stop the slide show after the last image or to continuously run it in a loop.
Adding Sound to a Still Image • You can add a sound to an image. The sound file that can be added to the image must be WAVE type (extension “.wav”). • The sound cannot be played back on the camcorder. 1 2 3 4 In the main window, select an image and select [Add/ Remove Sound] from the [Edit] menu. Click [Add]. Select the sound file and click [Open]. Click [OK]. • The sound file will be copied to the same folder as the image.
Reviewing and Changing the Owner Name of the Camcorder You can change and confirm the owner’s name of the camcorder. 4 Connect the camcorder to the computer ( Click [ 25). Preferences] in the CameraWindow menu screen. Click the [General] tab, and then click the [Connected Camera] tab. Y P O C Click [Edit] and enter the camcorder’s owner’s name and click [Set] [OK]. Windows 1 2 3 Input the camcorder’s owner’s name here (up to 31 characters).
Uninstalling the Software Uninstall the software when you wish to delete it from your computer or when reinstallation is required to fix corrupted files. You must have authorization as a Computer System Administrator to uninstall programs. Uninstalling ZoomBrowser EX Other programs in the [Canon Utilities] folder can also be uninstalled in the same way. 1 Click the Windows [start] menu and select [All Programs] [Canon Utilities] [ZoomBrowser EX] and [ZoomBrowser EX Uninstall].
Troubleshooting Connection Camcorder is not recognized when connected to the computer. Î There is no memory card in the camcorder. Insert a memory card into the camcorder. Î The camcorder is not set to the correct mode. Set the camcorder to still image playback mode. Î Camcorder is not correctly connected to the computer. Read Connecting the Camcorder to a Computer ( 25) and check the connection. Ensure that you are using the correct cable and that its connectors are in good shape.
CANON INC. U.S.A. ––––––––––– Canon U.S.A., Inc. Canon Customer Care Center Tel (US): 1-800-828-4040 (Mon.-Fri., 9 AM to 8 PM Eastern Time) CANADA ––––––––– Canon CANADA Inc. Tel (Canada): 1-800-OK-CANON (1-800-652-2666) ASIA –––––––––––– Canon Hongkong Co., Ltd. 19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong Tel: 852-3191-2333 Fax: 852-2428-3963 Y P O C The information in this manual is verified as of 1 January 2010. DIE-0350-000W © CANON INC.
