Vixia HD Dual Flash Camcorder Instruction Manual

100  Photos

Printing Photos

Printing Photos (Direct Print)

The camcorder can be connected to any PictBridge-compatible

printer. You can mark in advance the photos you want to print and set

the desired number of copies as a print order ( 103).

Canon printers: SELPHY printers of the CP, DS and ES series and PIXMA

printers marked with the PictBridge logo.

Connecting the Camcorder to the Printer

1 Set the camcorder to mode, single photo view.

/ You can select the photos in the built-in memory or on the

memory card. Afterwards, move the zoom lever toward T to return to

single photo view.

2 Turn on the printer.

3 Connect the camcorder to the printer using the supplied USB

cable.

• Connection . Refer to

Connection Diagrams

( 109).

• If the device selection screen appears, select [Computer/Printer] and

press .

• appears and changes to .

IMPORTANT

• If continues to flash (for more than 1 minute) or if does not

appear, the camcorder is not correctly connected to the printer. In such

case, disconnect the USB cable and turn off the camcorder and the

printer. After a short while, turn them on again, set the camcorder to

mode and restore the connection.

• During the following operations, even if you connect a printer to the

camcorder it will not be recognized.

- Deleting all photos

Operating modes:

COPY