Vixia HD Dual Flash Camcorder Instruction Manual

112  External Connections
Refer to Starting CameraWindow .
Using the software
1 Power the camcorder with the compact power adapter.
2 Set the camcorder to mode, in single photo view.
3 Connect the camcorder to the computer using the supplied USB
cable.
• Connection . Refer to
Connection Diagrams ( 109).
• If the device selection screen appears, select [Computer/Printer] and
press .
4 Save the photos onto the computer.
Refer to
Downloading Still Images to the Computer .
IMPORTANT
• When the camcorder is connected to a computer:
- Do not open the memory card slot cover and do not remove the
memory card.
- Do not access, change or delete any of the camcorder’s folders or
files directly from the computer as this may result in permanent data
loss. Always save your recordings on the computer, and restore the
files to the camcorder, using only the supplied software ImageMixer 3
SE.
•Operation may not work correctly depending on the software and the
specifications/settings of your computer.
•If you wish to use the image files on your computer, make copies of
them first. Use the copied files, retaining the originals.
•Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card s
lot cover.
-Do not disconnect the USB cable.
- Do not turn off the camcorder or the computer.
- Do not change the camcorder’s operating mode.
• When restoring to the camcorder video files that were previously saved
to the computer, do not disconnect the USB cable or turn off the cam-
corder or computer. Doing so may result in scenes that cannot be
played back on the camcorder.
PHOTO
4
PHOTO
COPY