Vixia HD Dual Flash Camcorder Instruction Manual

External Connections  115
• After the disc is recognized, an information screen will display the
type of DVD you are creating and the estimated time and number of
discs it will require (based on the disc you inserted).
• If you inserted a DVD-RW disc that already contains data, [The disc
already contains data.] will be displayed. To overwrite the data
(erasing the previous content of the disc), press , select [Yes] and
press again.
4 Press the start button on the DVD
burner.
• A progress bar will be displayed on the
screen.
• After pressing the start button (while the
disc is being written) the operation
cannot be canceled.
• When the last disc is finalized, [Task completed] will be displayed.
Take out the disc and close the disc tray.
When the data requires multiple discs
After a disc is finalized, it will be ejected automatically and a message
will appear. Insert the next disc and close the disc tray.
To create an additional copy of the same disc
After the operation is finished, insert a brand new disc, close the disc
tray and repeat the operation.
IMPORTANT
• While the camcorder is connected to the DVD burner, do not open the
memory card slot cover and do not remove the memory card.
• Observe the following precautions while the ACCESS indicator on the
camcorder is on or flashing. Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the power source or turn off the camcorder or the
DVD burner.
COPY