Vixia HD Dual Flash Camcorder Instruction Manual

External Connections  127
• The time required to convert scenes is approximately equal to the
scene’s total running time. Because conversion generally takes longer
on a computer, we recommend us ing the camcorder to convert scenes.
• You can play back the converted scenes from the [For Web (MPEG-2)]
index screen on the memory card. Open the original movies index
screen on the memory card, press and then select [For Web
(MPEG-2)].
Connecting to the Computer and Uploading your Videos
If you are connecting the camcorder to the computer immediately after
the conversion described in the previous section, start this procedure
from step 3 below. Otherwise, start this procedure from the beginning.
1 Power the camcorder using the compact power adapter.
2 Open the [For Web (MPEG-2)] index screen on the memory card.
Open the original movies index screen on the memory card, press
then select [For Web (MPEG-2)].
3 Connect the camcorder to the computer using the supplied USB
cable.
• Connection . Refer to
Connection Diagrams ( 109).
•If the device selection screen appears, select [Computer/Printer] and
press .
• On the computer, ImageMixer 3 SE will launch automatically and the
startup screen (ImageMixer 3 Launcher) will appear.
4 Click [Web upload] and continue the operation on the computer
following the software’s indications.
• See also ‘ImageMixer 3 SE Software Guide’.
IMPORTANT
• While the camcorder is connected to the computer, do not open the
memory card slot cover and do not remove the memory card.
•Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
-Do not disconnect the USB cable.
-Do not disconnect the power source or turn off the camcorder or the
computer.
INDEX SEL.
INDEX SEL.
4
COPY