Vixia HD Dual Flash Camcorder Instruction Manual

Video  71

NOTES

• When an external microphone is connected to the camcorder,

[Wind Screen] will automatically be set to [ Off ].

• If the audio level is too high and the sound gets distorted, turn on the

microphone attenuator with the [Microphone Attenuator] setting

or adjust the audio recording level manually ( 68).

Selecting the Playback Starting Point

If you have a very long scene, you may

want to start playing back the scene

from a certain point. You can use the

movie timeline to break the scene to

segments at fixed time intervals rang-

ing from 6 seconds to 6 minutes. If you recorded movies with the Face

Detection function ( 62) activated, you can display the scene divided

into segments every time the camcorder registered a change in the

main subject of the scene.

Movie Timeline

1 Open the original movies or playlist index screen.

• / You can select the original movies in the built-in memory

or on the memory card.

• To open the playlist index screen from the original movies index

screen:

- / For scenes in the built-in memory, press .

For scenes on the memory card, press and then select

[Playlist].

- Press .

2 Select ( , ) the scene you want to view and press .

• The [Timeline] screen appears. The large thumbnail will show the first

frame of the scene. Below it, the timeline ruler shows frames taken

from the scene at fixed intervals.

•Press again to return to the index screen.

Operating modes:

INDEX SEL.

PLAYLIST

DISP.

COPY