Camcorder User Manual
(_ NOTES
• When the audio level meter reaches the red point (0 dB), the sound may
be distorted.
• If the audio level is too high and the sound gets distorted, activate the
microphone attenuator with the _ _ [Microphone Attenuator[ set-
ting (or [Surround Mic Attenuator[ when the optional SM-V1 Surround
Microphone is attached to the camcorder).
• We recommend using headphones to check the sound level while
adjusting the audio recording level or when the microphone attenuator
is activated.
• This function can also be assigned to the custom key/dial (CC189).
UsingHeadphones
Use headphones for playback or to check the audio level while record-
ing. The headphones are connected to the AV OUT/O terminal, which
is used for both the headphones and the audio/video output. Before
connecting the headphones, follow the procedure below to change the
function of the terminal from AV output to O (headphones) output.
Operating modes: _ 1
* Headphones can be used also in mode but the function of the terminal carl--
not be changed in this mode. Changethe setting in advancein one of the other
operating modes.
h [FuNCI]i @} [MENU] @ _ _} [AV/HeadPh0nes] @}
_ [Headph0nes]
close the menu: @ [X]
_} [2D] _} [Volume] _}Drag Y0Ur finger left and right along
the volurne bar to adjust the volume _} [X] ....
* Only when performing the procedure in mode,
• O appears.
Video * 85