PUB.
Introduction Important Usage Instructions WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. 2 COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws.
Trademark Acknowledgements • • • • • • • • • • • • SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. “x.v.Color” and the “x.v.Color” logo are trademarks.
Highlights of the LEGRIA HF G10 The Canon LEGRIA HF G10 HD Camcorder is a high-performance camcorder whose compact size makes it ideal in a variety of situations. The following are just some of the many functions featured in the camcorder. 4 HD Recording HD CMOS PRO and DIGIC DV III processor The camcorder is equipped with a 1/3-type CMOS sensor that captures video at an effective pixel count of approximately 2.07 megapixels (1920x1080).
Enjoying your Recordings on Other Devices Connect the camcorder to an HDTV (0 119) AVCHD-compatible HDTVs and digital recorders with a card slot compatible with the type of memory card used*. Play video directly from your recorded memory card Eye-Fi Use an Eye-Fi card (0 135) to wirelessly upload recordings to your computer or a video sharing Web site. Save or upload to the Web. Create discs Use the supplied PIXELA’s software (0 127, 132).
Table of contents 1 Introduction 9 About this Manual 9 Conventions Used in this Manual 9 Supplied Accessories and CD-ROMs 11 Names of Parts 13 6 2 Preparations 19 Charging the Battery Pack 19 Preparing the Camcorder 21 Attaching the Lens Hood 21 Using the Viewfinder 21 Adjusting the Position and Brightness of the LCD Screen 22 Wireless Controller 24 Using a Tripod 24 Basic Operation of the Camcorder 25 Using the Touch Screen 25 Operating Modes 26 Using the Menus 27 First Time Settings 29 Setting the Date
4 Customization 82 Custom Button and Dial 82 Assignable Buttons 83 Changing the Assigned Function 83 Using an Assignable Button 83 Saving and Loading Menu Settings 84 Saving Menu Settings to a Memory Card 84 Loading Camera Settings from a Memory Card 84 5 Playback 85 Playing Back Video 85 Adjusting the volume 87 3D Flip View 88 The Index Selection Screen: Selecting the Content to Play Back 89 Deleting Scenes and Stories 90 Deleting a Single Scene 90 Deleting Scenes from the Date Index Screen 90 Deleting a
9 Saving/Sharing Recordings 124 8 Copying Recordings to a Memory Card 124 Copying Scenes from the Date Index Screen 124 Copying Scenes from a Story by Rating 125 Copying a Single Photo 125 Copying Photos from the Index Screen 125 Saving Recordings on a Computer 127 Saving Movies (Windows only) 127 Saving Photos (Windows/Mac OS) 128 Copying Recordings to an External Video Recorder 130 In High Definition 130 In Standard Definition 130 Uploading Movies to Video Sharing Web Sites 132 Converting Scenes into St
1 Introduction About this Manual Introduction About this Manual Thank you for purchasing the Canon LEGRIA HF G10. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (0 152). Conventions Used in this Manual • IMPORTANT: Precautions related to the camcorder’s operation. • NOTES: Additional topics that complement the basic operating procedures.
About this Manual indicates that a function is available in the operating mode indicated and indicates that the function is not available. For a detailed explanation refer to Operating Modes (0 26). Brackets [ ] are used to refer to control buttons and menu options you will touch on the screen and to other onscreen messages and displays. 10 Self Timer Self Timer Operating modes: 1 Open the [Self Timer] screen. [FUNC.] [MENU] 8 [Self Timer] 2 Touch [A On n] and then touch [a].
Supplied Accessories and CD-ROMs Supplied Accessories and CD-ROMs The following accessories are supplied with the camcorder: 11 CA-570 Compact Power Adapter (incl. power cord) BP-808 Battery Pack WL-D89 Wireless Controller (incl.
Supplied Accessories and CD-ROMs 12 The following CD-ROMs and software are supplied with the camcorder: • PIXELA’s Transfer Utility CD-ROM* - Use Transfer Utility for saving and transferring movies and music files you can use as background music. • PIXELA’s VideoBrowser CD-ROM* - In addition to all the functionality of Transfer Utility, you can use VideoBrowser for managing, editing, and playing back movies. • Y Instruction Manual/Photo Applications Ver.
Names of Parts Names of Parts Left side view 5 6 1 2 3 4 13 10 9 8 1 2 3 4 5 6 RESET button (0 155) 2 (camera/play) button (0 26) DISP. (onscreen display) button (0 80)/BATT.
Names of Parts Right side view 6 14 5 1 2 3 4 MIC terminal (0 73) Grip belt (0 23) USB terminal (0 116, 118, 130) 2 1 4 5 6 HDMI OUT terminal (0 116, 117) REMOTE terminal (0 75) Built-in speaker (0 87) 3
Names of Parts Front view 15 1 Back view 2 3 4 12 11 10 9 8 7 6 5 1 2 3 4 5 6 7 8 Instant AF sensor (0 166) Viewfinder (0 21) START/STOP button (0 36) Strap mount (0 23) DC IN terminal (0 19) Dioptric adjustment lever (0 21) CUSTOM (customizable) dial (0 82) CUSTOM (customizable) button (0 82) 9 LCD touch screen (0 22, 25) 10 POWERED IS button (0 53)/ Assignable button 2 (0 83) 11 AF/MF button (0 45)/ WEB button (0 132)/ Assignable button 1 (0 83) 12 Remote sensor (0 24)
Names of Parts Top view 1 2 3 4 16 5 6 7 1 2 3 4 5 6 7 Built-in microphone (0 67) Zoom lever (0 50) Mode switch (0 26) Mini advanced shoe ACCESS indicator (0 36) ON/OFF (CHG) indicator (0 19) Green - ON Orange - Standby (0 42) Red - Charging (0 19) POWER button
Names of Parts Bottom view 17 1 3 1 Serial number 2 3 BATTERY RELEASE switch (0 20) Tripod socket (0 24) 2
Names of Parts Wireless Controller WL-D89 7 18 1 2 3 8 4 5 9 10 6 1 2 START/STOP button (0 36) b (index selection) button (0 89) 3 4 5 6 7 8 9 10 MENU button (0 28, 139) DISP. (onscreen display) button (0 80) SET button B (stop) button (0 85) PHOTO button (0 36) Zoom buttons (0 50) Navigation buttons ( Z/O/y/A ) A/C (play/pause) button (0 85) Press and hold for more than 2 seconds to switch between shooting and playback mode.
2 Preparations Charging the Battery Pack Preparations Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter. The first time you use a battery pack, fully charge it and then use the camcorder until the battery pack is completely exhausted. Doing so will ensure that the remaining recording time will be displayed accurately.
Charging the Battery Pack To remove the battery pack 1 Slide U in the direction of the arrow and hold it pressed down. 2 Slide the battery pack and then pull it out. 20 BATTERY RELEASE switch IMPORTANT • Turn off the camcorder before connecting or disconnecting the compact power adapter. After pressing x to turn off the camcorder, important data is updated in the memory. Be sure to wait until the green ON/OFF (CHG) indicator goes out.
Preparing the Camcorder Preparing the Camcorder This section covers the basic preparations for the camcorder such as attaching the lens hood, adjusting the grip belt and adjusting the viewfinder and LCD screen. When attaching the lens hood, grip belt and straps, be careful not to drop the camcorder. Attaching the Lens Hood 21 Attach the lens hood to protect the lens and reduce the amount of stray light that may hit the lens. Remove the lens cap before attaching the lens hood.
Preparing the Camcorder Adjusting the Position and Brightness of the LCD Screen Rotating the LCD Panel 22 Open the LCD panel 90 degrees. • You can rotate the panel 90 degrees downward. • You can rotate the panel 180 degrees toward the lens. Rotating the LCD panel 180 degrees can be useful in the following cases: - To allow the subject to monitor the LCD screen while you use the viewfinder. - To include yourself in the picture when recording with the self timer.
Preparing the Camcorder NOTES • Using the bright setting will shorten the effective usage time of the battery pack. • You can further adjust the brightness of the LCD screen with the 6 [LCD Brightness] setting, or dim it with the 6 [LCD Screen Dimmer] setting to use in places where the light from the LCD screen can be a nuisance. • Adjusting the brightness does not affect the brightness of the recordings.
Preparing the Camcorder Wireless Controller First, insert the supplied CR2025 lithium button battery into the wireless controller. 24 1 Press the tab in the direction of the arrow and pull out the battery holder. 2 Place the lithium button battery with the + side facing up. 3 Insert the battery holder. Tab To use the wireless controller Point the wireless controller at the camcorder’s remote sensor when you press the buttons.
Basic Operation of the Camcorder Basic Operation of the Camcorder Using the Touch Screen The control buttons and menu items that appear on the touch screen change dynamically depending on the operating mode and the task you are performing. With the intuitive touch screen interface you have all the controls at your fingertips. You can also use the supplied stylus pen for a more precise operation. Touch Press firmly on an element displayed on the touch screen.
Basic Operation of the Camcorder Operating Modes Recording In recording mode, the camcorder’s operating mode is determined by the position of the mode switch. Operating mode Mode switch Operation Let the camcorder take care of all the settings while you concentrate on recording (0 37). This operating mode is suitable if you just prefer not to bother with detailed camcorder settings. 26 Enjoy full access to menus, settings and advanced functions (0 40).
Basic Operation of the Camcorder Using the Menus Many of the camcorder’s functions can be adjusted from the FUNC. panel and the setup menus. For details about the available menu options and settings, refer to the appendix Menu Options Lists (0 137). FUNC. Panel 27 Operating modes: The FUNC. panel shows a convenient overview of frequently used shooting functions. Touch [FUNC.] to access the FUNC. panel and then touch the function you want to set or adjust.
Basic Operation of the Camcorder Setup Menus Operating modes: * * In mode setup menus cannot be accessed and most menu settings will be reset to default values. 28 1 or mode only: Touch [FUNC.] 2 Touch [MENU] to open the setup menus. • You can also press u on the wireless controller. 3 Touch the tab of the desired menu. 4 Drag your finger up and down to bring the setting you want to change into the orange selection bar. • Menu items not available appear grayed out.
First Time Settings First Time Settings Setting the Date and Time You will need to set the date and time of the camcorder before you can start using it. The [Date/Time] screen will appear automatically when the camcorder’s clock is not set. 1 Press x to turn on the camcorder. • The [Date/Time] screen appears and the year will be selected. 2 Touch a field you want to change (year, month, day, hours or minutes). 3 Touch [Z] or [O] to change the field as necessary.
First Time Settings Changing the Time Zone Change the time zone to match your location. The default setting is Paris. Operating modes: 1 Open the [Time Zone/DST] screen. 30 [FUNC.] [MENU] 6 [Time Zone/DST] • Touching [FUNC.] is necessary only when performing the procedure in a recording mode. 2 Touch [S] to set the home time zone, or [V] to set the time zone of your destination when you are traveling. 3 Touch [Z] or [O] to set the desired time zone.
Using a Memory Card Using a Memory Card Memory Cards Compatible for Use with the Camcorder You can use the following types of commercially available Secure Digital (SD) cards with this camcorder. As of October 2010, the movie recording function has been tested using SD/SDHC/SDXC memory cards made by Panasonic, Toshiba and SanDisk. Memory card type: SD memory card, SD Speed Class*: Capacity: 128 MB or larger**.
Using a Memory Card Eye-Fi Cards This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check with the card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer.
Using a Memory Card Selecting the Memory for the Recordings You can select to record your movies and photos in the built-in memory or on a memory card. The default memory for recording both is the built-in memory. Operating modes: POINTS TO CHECK • Be sure you understand the information provided in Eye-Fi Cards (0 32) before using an Eye-Fi card. 1 Open the [Rec Media for Movies] or [Rec Media for Photos] screen. [FUNC.
Using a Memory Card NOTES 34 • You cannot use relay recording from the built-in memory to memory card Y. When using a single memory card, be sure to insert it into memory card slot X. • There will be a momentary stop in the scene at the point where the camcorder switches from one memory to another. • Any of the following actions will deactivate the relay recording function: - Turning off the camcorder. - Opening the double memory card slot cover. - Changing the position of the mode switch.
Using a Memory Card Initializing the Memory Initialize memory cards when you use them with this camcorder for the first time. You can also initialize a memory card or the built-in memory to permanently delete all the recordings it contains. At the time of purchase, the built-in memory comes pre-initialized and contains music files for use as background music and images for use with the image mix function (image mix frames). Operating modes: 1 Power the camcorder using the compact power adapter.
Recording Movies and Photos 3 Recording Recording Recording Movies and Photos 36 By default, movies and photos are recorded in the built-in memory. You can select the memory that will be used to record movies and photos (0 33). Please read the IMPORTANT section (0 41) before using an Eye-Fi card. POINTS TO CHECK • Before you begin recording, make a test recording first to check that the camcorder is operating correctly. Preparing to Record 1 Attach a charged battery pack to the camcorder (0 19).
Recording Movies and Photos Recording in AUTO Mode When you use mode to shoot video and take photos, the camcorder will automatically adjust various settings for you. Operating modes: 1 Set the mode switch to . 37 2 Turn on the camcorder. To record video Press g to begin recording. • Press g again to pause the recording. • The ACCESS indicator will flash from time to time while the scene is being recorded. • During recording, N will appear on the screen. [PHOTO] To take photos Touch [PHOTO].
Recording Movies and Photos Rating Scenes You can turn on the scene rating option in recording mode with the 8 [Rate Scenes (Recording)] setting. Immediately after recording a scene, you will have the option to rate it by touching one of the rating buttons; you can also touch [ ] or [a] to leave the scene unrated. Later you can play back scenes and perform other scene operations by rating. 38 You can rate scenes while the camcorder is in described above in or mode.
Recording Movies and Photos Smart AUTO icons Background (color of the icon) → Bright1 (grey) Subject ↓ Blue skies1 (light blue) Vivid colors1 (green/red) Sunsets1 (orange) People (stationary) ( ) ( ) ( — ) 39 People (moving) ( Subjects other than people, such as landscapes ) ( Close objects ( ( ) ) ( / 2 / 2 ) ( Background (color of the icon) → ( ) ) ( / 2 / 2 ) ( — ) / 2 / 2 — ) Dark (dark blue) Subject ↓ Spotlight Night scene People (stationary) — — Pe
Recording Movies and Photos NOTES 40 • About the power saving mode: If 6 [Power Saving Mode] [Auto Power Off] is set to [A On], the camcorder will shut off automatically to save power when it is powered by a battery pack and is left without any operation for 5 minutes. Press x to turn on the camcorder. • When recording in bright places, it may be difficult to use the LCD screen.
Recording Movies and Photos Reviewing the Latest Scene Recorded You can review the last 4 seconds of the last scene recorded with the camcorder without switching to playback mode. While reviewing the latest scene, the picture will be played back without sound. Operating modes: 1 Set the mode switch to y or . 2 Review the last 4 seconds of the scene. [FUNC.] [ Review Recording] NOTES • When double slot recording is activated, only the scene recorded on memory card X will be played back.
Quick Start Function Quick Start Function When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In standby mode the camcorder consumes only about 1/3 the power used when recording, saving energy when you are using a battery pack. Additionally, when you open the LCD panel or pull out the viewfinder, the camcorder is ready to start recording in approximately 1 second*, allowing you to record the subject right away.
Selecting the Video Quality (Recording Mode) Selecting the Video Quality (Recording Mode) The camcorder offers 5 recording modes. Changing the recording mode will change the recording time available on the memory. Select MXP or FXP mode for better movie quality; select LP mode for longer recording times. The following table gives approximate recording times. Operating modes: 1 Open the [Recording Mode] screen. [FUNC.] [MENU] 8 43 [Recording Mode] 2 Touch the desired recording mode and then touch [a].
Selecting the Frame Rate Selecting the Frame Rate You can change the frame rate (the number of frames recorded per second) to change the look of your movies. Operating modes: 1 Open the [Frame Rate] screen. 44 [FUNC.] [MENU] 8 [Frame Rate] 2 Touch the desired frame rate and then touch [a]. Options [w 50i (Standard)] 50 fields per second, interlaced. Standard frame rate of PAL analog TV signals. [D PF25] Shooting at 25 frames per second, progressive*.
Focus Adjustment Focus Adjustment You can adjust the focus manually and use the peaking function to assist you or you can let the camcorder focus for you by using autofocus. With autofocus, you can set the autofocus speed. The camcorder also features two more focusing functions, face detection and Touch & Track. Operating modes: 45 POINTS TO CHECK • Adjust the zoom before you start the procedure. Manual Focus Use the focus ring to focus manually.
Focus Adjustment 5 After adjusting the focus, touch [ ] to return to the preset focus position. • Touch [ ] again to cancel the current preset focus position. • [ ] will be grayed out while adjusting the focus or zoom. • You can use the 6 [Focus Preset Speed] setting to adjust the speed at which the camcorder returns to the preset focus position. 46 NOTES • The preset focus position will be canceled when the camcorder is turned off.
Focus Adjustment NOTES • While using autofocus, you can turn the manual ring to focus manually. When you stop turning the ring, the camcorder returns to autofocus. This is useful in situations such as when focusing on a subject on the other side of a window. • When recording in bright surroundings, the camcorder closes down the aperture. This may cause the picture to appear blurred and is more noticeable toward the wide angle end of the zoom range. In such case, set 7 [ND Filter] to [O Automatic].
Focus Adjustment To select the main subject If there is more than one person in the picture, the camcorder will automatically select one person it determines is the main subject. The main subject is indicated by a white face detection frame and the camcorder will optimize the settings for that person. Other faces will have gray frames. 48 Touch a different face on the touch screen to optimize the camcorder’s settings for that person using the Touch & Track function.
Focus Adjustment NOTES • Touching somewhere with a color or pattern unique to the subject will make it easier to track. However, if there is another subject in the vicinity that shares similar characteristics to the selected subject, the camcorder may start tracking the incorrect subject. Touch the screen again to select the desired subject. • In certain cases, Touch & Track may not be able to track the subject.
Zooming Zooming Operating modes: 50 There are three ways you can zoom in and out: using the zoom lever on the camcorder, using the zoom buttons on the wireless controller or using the zoom controls on the touch screen. In addition to the 10x optical zoom, in mode, you can turn on the digital zoom* (40x or 200x) with the 7 [Digital Zoom] setting. This camcorder also features a digital tele-converter, which allows you to enlarge the image on the screen digitally.
Zooming Approximate zoom speeds* (zoom lever) [Zoom Lever Zoom Speed] setting [I] (variable) [ ] (constant) [Zoom Speed Level] setting Selected constant speed [L Slow] [K Normal] [J Fast] – 4 sec. to 4 min. 45 sec. 3 sec. to 3 min. 2 sec.** to 1 min. 1 (slowest) 4 min. 45 sec. 3 min. 1 min. 16 (fastest) 4 sec. 3 sec. 2 sec.** * Measured from full wide-angle to full telephoto.
Zooming Soft Zoom Control Soft zoom control allows you to start and/or stop the zoom gradually. 1 Open the soft zoom control screen. [FUNC.] [MENU] 7 [Soft Zoom Control] 2 Touch the desired option and then touch [f]. 52 Options ( Default value) [B Off] Use this setting if you do not intend to use soft zoom control. [ Start] Zoom starts gradually. [ Stop] Zoom stops gradually. [ Start & Stop] Zoom start and stops gradually.
Advanced Image Stabilization Advanced Image Stabilization The image stabilizer reduces camcorder blur (blur due to the camcorder moving) so you can get nice, stable shots. Select the image stabilization mode according to the shooting conditions. Operating modes: 1 Open the image stabilizer screen. [FUNC.] [Image Stabilizer] 2 Touch the desired IS mode and then touch [a].
Automatic Gain Control (AGC) Limit Automatic Gain Control (AGC) Limit When recording in dark surroundings, the camcorder will automatically increase the gain to try to get a brighter picture. However, using higher gain values may result in more noticeable video noise. You can select the AGC limit to curb the amount of noise by setting the maximum gain value to be used. The smaller the AGC limit, the picture will be darker but will have less the noise.
Automatic Exposure Recording Programs Automatic Exposure Recording Programs With the automatic exposure (AE) recording programs, the camcorder will adjust the shutter speed and/or aperture value to obtain the optimal exposure. When using the AE recording programs, you can change functions like the white balance and image effects. Operating modes: 1 Open the screen of the desired recording program. [FUNC.] [Rec. Programs] 55 [B Shutter-Pri. AE] or [C Aperture-Pri.
Automatic Exposure Recording Programs NOTES 56 • [B Shutter-Pri. AE]: - On screen only the denominator is displayed – [B 250] indicates a shutter speed of 1/250 second, etc. - When recording in dark surroundings, you can obtain a brighter picture by using slow shutter speeds; however, image quality may not be as good and autofocus may not work well. - The image may flicker when recording with fast shutter speeds. • [C Aperture-Pri.
Exposure Adjustment Exposure Adjustment At times, backlit subjects may appear too dark (underexposed) or subjects under very strong lights may appear too bright or glaring (overexposed). In such cases, adjusting the exposure will correct this. This camcorder features a dedicated recording program, [y Manual Exposure], for adjusting the exposure manually. However, you can also adjust the exposure when using other recording programs.
Exposure Adjustment Using the Zebra Pattern You can use the zebra pattern to identify areas that might be overexposed, so you can correct the exposure appropriately. The camcorder offers two levels of zebra pattern: With 100% only areas that will lose detail in the highlight areas will be identified, while 70% will identify also areas that are dangerously close to losing detail. 1 From the exposure adjustment screen, touch [5] to select the zebra level. 58 2 Touch [70%] or [100%] and then touch [f].
Exposure Adjustment To adjust the Touch AE function for highlights (Highlight AE) Certain subjects, like clouds or white objects, are easily overexposed and can end up appearing as bright areas where all detail is lost. Using the [Highlights] setting, you can touch the brightest area inside the e frame and the camcorder will automatically make corrections so that area is not overexposed.
White Balance White Balance The white balance function helps you to accurately reproduce colors under different lighting conditions. Operating modes: 60 POINTS TO CHECK • Select a recording program other than the Special Scene recording programs. 1 Open the white balance screen. [FUNC.] [m White Balance] 2 Touch the desired option and then touch [a].
White Balance NOTES • When you select a custom white balance: - Set 7 [Digital Zoom] to [B Off]. - Reset the white balance when you change locations or the lighting or other conditions change. - Depending on the light source, g may keep flashing. The result will still be better than with [Y Automatic].
Special Scene Recording Programs Special Scene Recording Programs Recording in a very bright ski resort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting a Special Scene recording program. Operating modes: 1 Open the recording programs screen. 62 [FUNC.] [Rec. Programs] [F Portrait] 2 Touch the desired recording program and then touch [a].
Special Scene Recording Programs [LSpotlight] [MFireworks] To record spotlit scenes. To record fireworks. 63 NOTES • [F Portrait]/[G Sports]/[I Snow]/[J Beach]: The picture may not appear smooth during playback. • [F Portrait]: The blur effect of the background increases the more you zoom in (P). • [I Snow]/[J Beach]: The subject may become overexposed on cloudy days or in shaded places. Check the image on the screen. • [p Low Light]: - Moving subjects may leave a trailing afterimage.
Image Effects Image Effects You can adjust the color depth, brightness, contrast, and sharpness of the image. Operating modes: POINTS TO CHECK 64 • Select a recording program other than the Special Scene recording programs. 1 Open the image effects screen. [FUNC.] [Image Effects] 2 Touch [ON] and then touch [Color Depth], [Sharpness], [Contrast] or [Brightness]. • Select [OFF] to turn off the image effects. 3 Touch [y] or [A] or drag your finger along the dial to adjust the effect level.
Self Timer Self Timer Operating modes: 1 Open the [Self Timer] screen. [FUNC.] [MENU] 8 [Self Timer] 2 Touch [A On n] and then touch [a]. • n will appear on the screen. • Repeat, selecting [B Off], to turn off the self timer. Movies: In record pause mode, press g. The camcorder starts recording after a 10-second countdown*. The countdown appears on the screen. Photos: In record pause mode, touch [PHOTO]. The camcorder will record the photo after a 10-second countdown*.
Audio Recording Level Audio Recording Level You can adjust the audio recording level of the built-in or an external microphone. You can display the audio level indicator while recording. Operating modes: 1 Open the manual audio recording level adjustment screen. 66 [FUNC.] [c Mic. Level] [y Manual] • The audio level indicator and current audio recording level will appear on the screen.
Built-In Microphone Directionality Built-In Microphone Directionality You can change the directionality of the built-in microphone to have more control over how sound is recorded. Operating modes: 1 Open the [Built-in Mic Directionality] screen. [FUNC.] [MENU] 7 [Built-in Mic Directionality] 2 Touch the desired option and then touch [a]. Options ( Default value) [ Monaural] Mono recording that emphasizes sound coming from the front of the camcorder.
Audio Equalizer Audio Equalizer You can use the audio equalizer to adjust sound levels by specifically targeting the high- or lowfrequency range. The audio equalizer settings are only available when recording sound using the builtin microphone. Operating modes: 68 1 Open the [Built-in Mic Freq. Response] screen. [FUNC.] [MENU] 7 [Built-in Mic Freq. Response] 2 Touch the desired option and then touch [a].
Audio Mix Audio Mix When recording, you can mix audio from the built-in microphone with external audio from the MIC terminal and adjust the mix balance for original sound effects. The external audio input can be from the optional WM-V1 Wireless Microphone, a commercially available external microphone or from an external audio player (analog Line In). Operating modes: 1 Connect the external source to the MIC terminal. 2 Open the [MIC Terminal Input] screen. [FUNC.
Using Headphones Using Headphones Use headphones for playback or to check the audio level while recording. The headphones are connected to the AV OUT/X terminal, which is used for both the headphones and the audio/video output. Before connecting the headphones, follow the procedure below to change the function of the terminal from AV output to X (headphones) output. Operating modes: 70 * * Headphones can be used also in mode but the function of the terminal cannot be changed in this mode.
Using the Mini Advanced Shoe Using the Mini Advanced Shoe Using the mini advanced shoe, you can attach to the camcorder a range of optional accessories to expand its functionality. For details about optional accessories available for use with your camcorder, refer to Accessories (0 168). For details about how to attach and use the accessories, refer also to the instruction manual of the accessory used. 1 Open the mini advanced shoe cover. 2 Attach the optional accessory to the mini advanced shoe.
Using an External Microphone Using an External Microphone When recording in very quiet surroundings, the built-in microphone may pick up the sound of the camcorder’s internal machinery. When recording outside, the built-in microphone may pick up excessive noise from wind. In such cases, we recommend using an external microphone with a wind screen.
Using an External Microphone 2 Connect the receiver to the camcorder’s MIC terminal. MIC terminal 73 3 If necessary, activate the audio mix function (0 69) and adjust the audio mix balance. 4 Attach the microphone (transmitter) to the subject. • For details about using the WM-V1, refer to the instruction manual supplied with the microphone. Using Commercially Available Microphones You can also use commercially available condenser microphones with their own power supply and a cable no longer than 3 m.
Using an External Video Light Using an External Video Light You can use the optional VL-5 Video Light or VFL-2 Video Flash Light when you need to record movies in dark locations. Operating modes: 74 Attach the optional video light to the mini advanced shoe. • Refer to Using the Mini Advanced Shoe (0 71). • will appear on the screen when you turn on the optional video light (ON or AUTO). For details about using the optional video light, refer to the instruction manual of the accessory used.
Using a Zoom Remote Controller Using a Zoom Remote Controller The optional ZR-2000 or ZR-1000 Zoom Remote Controller will allow you to use certain functions while viewing the picture on an external monitor without touching the camcorder. This is particularly useful while the camcorder is mounted on a tripod and you want to ensure maximum stability of a shot. Operating modes: Connect the optional ZR-2000 or ZR-1000 Zoom Remote Controller to the REMOTE terminal on the camcorder.
Color Bars/Audio Reference Signal Color Bars/Audio Reference Signal You can have the camcorder output and record color bars and a 1 kHz audio reference signal. Operating modes: 1 Open the [Color Bars & Test Tone] screen. [FUNC.] 76 [MENU] 8 [Color Bars & Test Tone] 2 Touch the desired option and then touch [a]. Options ( Default value) [B Off] Select this option if you do not intend to use the color bars or audio reference signal. [ Color Bars] Displays a standard SMPTE color bar pattern.
Video Scopes Video Scopes The camcorder can display a simplified waveform monitor. It can also display an edge monitor* to help you focus. The video scopes appear only on the LCD screen. They do not appear in the viewfinder or on an external monitor. * The edge monitor looks at the focus of the entire picture and displays the results as a waveform. Operating modes: 77 Displaying the Waveform Monitor during [A Programmed AE] Recording Program 1 Make sure the recording program is [A Programmed AE]. [FUNC.
Video Snapshot Video Snapshot Record a series of short scenes. Then, play back your video snapshot scenes set to your favorite music (0 110). The default length of a video snapshot scene is 4 seconds but you can change it to 2 or 8 seconds, or to the length recommended for the selected story scene (category) in Story Creator, with the 8 [Video Snapshot Length] setting. 78 Operating modes: 1 Open the video snapshot screen. [FUNC.
Pre-Recording Pre-Recording The camcorder will start recording 3 seconds before you press g, ensuring you do not miss important shooting opportunities. This is especially useful when it is difficult to predict when to start recording. Operating modes: 1 Open the pre-recording screen. [FUNC.] [d Pre REC] 2 Touch [A On] and then touch [a]. • d will appear on the screen. • Repeat, selecting [B Off], to turn off pre-recording. 3 Press g.
Onscreen Displays and Data Code Onscreen Displays and Data Code You can turn most onscreen displays on or off. Operating modes: Repeatedly press h to turn the onscreen displays on/off in the following sequence: 80 , mode: • All displays on • Most displays off1 , mode2: • Only data code on • All displays on 1 Pressing h will turn off most of the icons and displays that appear automatically but will not remove control buttons ([FUNC.], [PHOTO], etc.
Faders Faders The camcorder offers two professional looking transition effects to fade-in or fade-out scenes. You have the option to activate the fader only one time or every time you start or stop recording. Operating modes: 1 Open the fader selection screen. [FUNC.] [O Faders] 2 Touch the desired fader and then touch [a]. • You can preview the transition effect on the screen. • The icon of the selected fader appears in green.
Custom Button and Dial 4 Customization Customization Custom Button and Dial You can assign to f and CUSTOM dial one of several frequently used functions. You can then adjust the selected function using f and CUSTOM dial, without having to access the menu. 82 Operating modes: 1 Open the [Custom Key/Dial] screen. [FUNC.] [MENU] 6 [Custom Key/Dial] 2 Touch the desired option and then touch [a]. Options [o Tv/Av] ( Default value) When you set the recording program to [B Shutter-Pri.
Assignable Buttons Assignable Buttons The camcorder conveniently features 2 buttons to which you can assign various functions. By assigning often used functions, you can quickly access them with a single press of a button. Operating modes: 83 Changing the Assigned Function 1 Open the selection screen for the desired assignable button. [FUNC.] 6 [MENU] [Assign Button 1] or [Assign Button 2] 2 Select the desired option and then touch [a].
Saving and Loading Menu Settings Saving and Loading Menu Settings After you adjust the cinema-look filters and other settings in the FUNC. panel and setup menus, you can save those settings on a memory card. Operating modes: 84 Saving Menu Settings to a Memory Card Menu settings must be saved to memory card Y. If the memory card already has menu settings on it, they will be overwritten. 1 Insert a memory card into memory card slot Y. 2 Open the [Backup Menu Settings 7] screen. [FUNC.
5 Playback Playing Back Video Playback Playing Back Video Operating modes: 1 Press S. • You can also press and hold B on the wireless controller for more than 2 seconds to switch between shooting and playback mode. 2 Open the date index screen, if it is not displayed. [b] [1 Date] 3 Look for the scene you want to play back. • Move the zoom lever toward Q to show 15 scenes per page; move it toward P to show 6 scenes per page. AMemory being read. BRecording date.
Playing Back Video 4 Touch the desired scene to play it back. • Playback will start from the scene selected and continue until the end of the last scene in the index screen. • Touch the screen to display the playback controls. During playback, the playback controls will disappear automatically after a few seconds without operation. In playback pause, touch the screen again to hide the playback controls. 86 During playback: AJump to the beginning of the scene. Double-tap to jump to the previous scene.
Playing Back Video Adjusting the volume 1 During playback, touch the screen to display the playback controls. 2 Touch [ ], drag your finger along the [Speaker Volume]* bar to adjust the volume and touch [f]. * When 6 instead. [AV/Headphones] is set to [J Headphones], adjust the [Headphone Volume] bar During playback pause: AResume playback. BSlow playback* backward/forward. CCapture the displayed frame as a photo (0 96). DDecoration (0 102).
Playing Back Video 3D Flip View Touch [ ] in the date index screen to switch to 3D Flip View. This convenient way of displaying scenes grouped by recording date in a 3D layout can be useful to flip through a large number of recordings. 88 ARecording date. BDrag your finger left to go to the next date with recordings. CDrag your finger up and down to browse through the scenes recorded in the displayed date. DDrag your finger right to go to the previous date with recordings.
The Index Selection Screen: Selecting the Content to Play Back The Index Selection Screen: Selecting the Content to Play Back From the index selection screen you can select the content you want to play back (original scenes by date or by story, or photos, for example). You can also select the memory from which you want to play back your recordings. Operating modes: In any index screen, touch [b].
Deleting Scenes and Stories Deleting Scenes and Stories You can delete those scenes and stories that you are not interested in keeping. Deleting scenes allows you also to free up space on the memory. Operating modes: 90 Deleting a Single Scene 1 Play back the scene you wish to delete. 2 Touch the screen to display the playback controls. 3 Open the screen to delete the scene. [C] [Edit] [Delete] 4 Touch [Yes]. • The scene is deleted. 5 Touch [OK].
Deleting Scenes and Stories Deleting a Single Scene from a Story 1 Open the list of scenes of the story that contains the scene you want to delete. [b] [ Gallery] Bring the desired story to the front [Scene List] 2 In the [Scene List] screen, drag your finger up/down to select the scene you want to delete. 3 Touch the orange box on the right to open the [Edit Scene] screen. 4 Touch [d] and then touch [Yes]. • The selected scene is deleted. 5 Touch [OK] and then touch [f].
Deleting Scenes and Stories Deleting Stories Deleting a story permanently deletes all the scenes it contains. The two preexisting stories, [Unsorted] and [Video Snapshot], cannot be deleted. 1 Open the gallery. [b] 92 [ Gallery] 2 Select the story you want to delete. • Drag your finger right/left to bring the desired story to the front. 3 Open the [Delete Story] screen. [Story Details] [Edit Story] [Delete Story] 4 Touch [Yes]. • Touch [Stop] to interrupt the operation while it is in progress.
Dividing Scenes Dividing Scenes You can divide scenes in order to leave out the best parts and later cut out the rest. Operating modes: 1 Play back the scene you want to divide. 2 Pause the playback at the point where you want to divide the scene. 3 Open the scene division screen. [Edit] [Divide] 4 Bring the scene to a precise point, if necessary. • Playback controls will appear on the screen (0 86).
Selecting the Playback Starting Point Selecting the Playback Starting Point If you have a very long scene, you may want to start playing back the scene from a certain point. You can use the movie timeline to break the scene to segments at fixed time intervals ranging from 6 seconds to 6 minutes. Operating modes: 94 1 Open the date index screen. 2 Open the scene’s [Timeline] screen. [c] Desired scene • The [Timeline] screen appears. The large thumbnail will show the first frame of the scene.
Capturing Video Snapshot Scenes and Photos from a Movie Capturing Video Snapshot Scenes and Photos from a Movie You can capture video snapshot scenes, single photos or a series of continuous photos from a previously recorded scene. For example, you may want to print photos from video recorded at a party or create a small video clip using video snapshot scenes from the highlights of an event.
Capturing Video Snapshot Scenes and Photos from a Movie Capturing Photos You can capture a single photo or a series of photos. The size of the captured photos will be 1920x1080 and it cannot be changed. Please read the IMPORTANT section (0 96) before using an Eye-Fi card. To select the photo capture settings 96 1 Open the [Photo Capture from Video] screen. [MENU] 8 [Photo Capture from Video] 2 Touch [A Single Photo] or [B Photo Sequence] and then touch [a].
6 Using Story Creator to Create Video Stories Video Stories and Cinema Style Video Stories and Cinema Style Using Story Creator to Create Video Stories Story Creator is a helpful function that offers suggestions for typical scenes in a number of situations. With Story Creator, creating a video story with a structured yet interested storyline is as easy as selecting one of the story themes, such as [Travel], [Kids & Pets] or [Blog], and following the suggested categories to record video.
Using Story Creator to Create Video Stories Recording a Scene within a Story Press g to record movies within the selected story scene (category). • Use the displayed recommended length as a reference when recording scenes. • Scenes will be recorded under the story and category currently selected. • You can also record video snapshot scenes (0 78). 98 AReturn to the list of story scenes (categories). BRecommended length of scenes in this category. CCurrently selected story scene (category).
Using Story Creator to Create Video Stories Recording Additional Scenes within an Existing Story 1 Start Story Creator mode. [FUNC.] [ Story Creator] • Alternatively, you can set an assignable button to [ Story Creator] (0 83). 2 Select the story to which you want to add new scenes. • The list of story scenes will appear. The orange frame on the right will show how many scenes you have recorded in each story scene (category).
CINEMA Mode and Cinema-Look Filters CINEMA Mode and Cinema-Look Filters In mode, the camcorder will adjust the frame rate and several other picture-related settings to give your recordings a cinematic look. In this mode you can also use a variety of professional cinemalook filters to create unique movies with a distinctive appearance. Operating modes: 100 1 Set the mode switch to . 2 Select the desired cinema-look filter.
CINEMA Mode and Cinema-Look Filters Options ( Default value) The camcorder offers 9 cinema-look filters. Select the desired filter while previewing the effect on the screen.
Adding Decorations Adding Decorations 102 Using the decoration function, you can add various graphical elements to the picture, such as stamps, watermarks, the date/time, and even your own freehand drawings. Freehand drawings can help emphasize a portion of the picture to attract viewers' attention. The supplied stylus pen will be especially useful for adding decorations. You can decorate scenes as they are being recorded, during playback or just before converting them to standard definition.
Adding Decorations 103 ACanvas - The area where you will draw and see your decorations in action. BToolbar. C[ Pens and Stamps] Select the type of pen or stamp and its color. You can also save a canvas or load a previously saved canvas. D[ Animated Stamps] Select animated stamps to add to your decoration. E[ Captions] Add the date, date and time, story title or story theme category as a caption that will be included in the recording.
Adding Decorations To load a previously saved canvas In the decoration screen: 1 Touch [ ] and then touch [fLoad]. 2 Touch [Yes]. • The freehand drawings and stamps saved in the memory will be loaded. 3 Touch [f]. 104 To use [Animated Stamps] 1 Touch [ ]. • The [Animated Stamps] screen will appear. 2 Touch one of the control buttons. 3 Touch anywhere on the canvas to place the selected animated stamp. You can also drag the animated stamp to a different location. To use [Captions] 1 Touch [ ].
Adding Decorations Mixing Your Own Images with Live Video You can use images you make on your computer for the image mix (Chroma Key) function. Make sure that the image you want to use has a blue or green area, which will be replaced by the live video using Chroma Key mixing. Refer to About the image files for the Image Mix function (0 176) for details about the types of image files that can be used and where to transfer them.
Adding Decorations Decorating Scenes during Playback Operating modes: 1 Play back the scene you want to decorate. 106 2 Touch the screen to display the playback controls. 3 Touch [ ] to open the decoration screen. 4 Decorate the scene using the tools from the toolbar as explained in the previous section. • In playback mode, the decorations will not be saved with the original recording. NOTES • Initializing a memory will erase any [Pens and Stamps] drawing canvas and image files you may have saved.
Playing Back Stories from the Gallery Playing Back Stories from the Gallery You can play back recordings made using Story Creator to play them back as a single compelling video story following the storyline order. Regular scenes and video snapshot scenes recorded without using Story Creator, will appear in the gallery under the [Unsorted] or [Video Snapshot] stories. When playing back stories from the gallery, you can choose to play back only scenes with a certain rating.
Playing Back Stories from the Gallery IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s operating mode.
Rating Scenes Rating Scenes You can rate story scenes immediately after recording them (0 38) or during playback. You can then select multiple scenes with the same rating, for example, in order to play back or copy only your favorite scenes. Operating modes: 109 Rating Scenes from the List of Scenes 1 Open the list of scenes of the story that contains the scenes you want to rate.
Playback with Background Music Playback with Background Music Play back movies (or a photo slideshow) with background music. You can use one of the supplied music tracks or connect an external audio player to use your favorite songs as background music. Operating modes: 110 Using One of the Supplied Music Tracks as Background Music The supplied Camcorder Supplemental Disc contains 3 music tracks you can use as background music.The music files come pre-installed in the built-in memory.
Playback with Background Music To adjust the background music balance during playback 1 During playback, touch the screen to display the playback controls. 2 Touch [ ], drag your finger along the [Music Balance] bar to adjust the background music balance as desired and touch [f]. To delete a music track In the [Select Music] screen, touch [Z] or [O] to select the track you want to delete. Touch [d] and then touch [Yes]. • The selected music track is deleted.
Playback with Background Music IMPORTANT • If you use copyrighted songs and music tracks in your video creations, remember that music under copyright may not be used without permission from the copyright holder, except for cases permitted under applicable laws, such as for personal use. Make sure to follow applicable laws when using music files. 112 NOTES • Initializing a memory card will permanently erase any music files you may have transferred to the card.
Copying and Moving Scenes Within/Between Stories Copying and Moving Scenes Within/Between Stories You can copy and move scenes in the gallery within the same story scene (category), between story scenes in the same story, and between stories recorded in the same memory. Operating modes: 1 Open the list of scenes of the story that contains the scene you want to copy or move.
Selecting a Story’s Thumbnail Image Selecting a Story’s Thumbnail Image Initially, the image used as the story’s thumbnail is the first frame of the first scene in the story. You can set your favorite scene as the thumbnail that will represent the story in the gallery. Operating modes: 1 Open the gallery. 114 [b] [ Gallery] 2 Select the story whose thumbnail you want to change. • Drag your finger right/left to bring the desired story to the front. 3 Open the [Story Thumbnail] screen.
Changing a Story’s Title Changing a Story’s Title When you first create a story, the current date will be used as the story’s title but you can change the title later on. The title can be up to 14 characters long (available characters are limited). The title of the two preexisting stories, [Unsorted] and [Video Snapshot] cannot be changed. Operating modes: 1 Open the gallery. [b] [ 115 Gallery] 2 Select the story whose title you want to change.
Terminals on the Camcorder 7 External Connections External Connections Terminals on the Camcorder 1 COMPONENT OUT Terminal* 116 Access: Open the LCD panel and terminal cover. The component video terminal is for video only. When you use connection B, do not forget the audio connections using the AV OUT/X terminal. 2 AV OUT/X Terminal Access: Open the LCD panel and terminal cover. Sound from the built-in speaker will be muted while the STV-250N Stereo Video Cable is connected to the camcorder.
Connection Diagrams Connection Diagrams In the following connection diagrams, the left side shows the terminals on the camcorder and the right side shows (for reference only) an example of terminals on a connected device. Connection A HDMI Type: Digital Quality: High definition Output only Connect to a high-definition TV (HDTV) with an HDMI input terminal.
Connection Diagrams Connection C Composite Video Type: Analog Quality: Standard definition Output only Connect to a standard TV or a VCR with audio/video input terminals.
Playback on a TV Screen Playback on a TV Screen Connect the camcorder to a TV to view and check your recordings. Playback on an HDTV using one of the high-definition connections will ensure the best playback quality. Operating modes: 1 Turn off the camcorder and the TV. 2 Connect the camcorder to the TV. 119 • Refer to Connection Diagrams (0 117) and select the most appropriate connection for your TV. 3 Turn on the connected TV.
Viewing Photos 8 Photos Photos Viewing Photos Operating modes: 120 1 Press S. 2 Open the [Photos] index screen, if it is not displayed. [b] [Photos] 3 Look for the photo you want to play back. • Move the zoom lever toward Q to show 15 photos per page; move it toward P to show 6 photos per page. AMemory being read. BDrag your finger left for the next index page.* CDrag your finger right for the previous index page.* DOpen the index selection screen (0 89).
Viewing Photos 4 Touch the photo you wish to view. • The photo is displayed in single photo view. • Drag your finger left/right to browse through the photos one by one. To return to the index screen from single photo view 1 Touch the screen to display the playback controls. 2 Touch [Q]. Photo Jump Function When you have recorded a large number of photos, you can jump easily through the photos using the scroll bar. 1 Touch the screen to display the playback controls. 2 Touch [g].
Deleting Photos Deleting Photos You can delete those photos that you are not interested in keeping. Operating modes: 122 Deleting a Single Photo 1 In single photo view, select the photo you want to delete. 2 Touch the screen to display the playback controls. 3 Open the screen to delete photos. [Edit] [Delete] 4 Touch [d Proceed] and then touch [Yes]. • The photo is deleted. 5 Drag your finger left/right to select another photo to delete or touch [a].
Slideshow Slideshow You can play a slideshow of all the photos and even set it to music. Operating modes: 1 Open the [Photos] index screen. [b] [Photos] 2 Select the background music to use during the photo slideshow. • Music tracks: Steps 2 - 3 (0 110). External audio: Steps 2 - 4 (0 111). Slideshow set to a music track 3 Touch the photo that will open the slideshow to display it in single photo view.
Copying Recordings to a Memory Card 9 Saving/Sharing Recordings Saving/Sharing Recordings Copying Recordings to a Memory Card 124 To copy your recordings, you must select recordings in the built-in memory or on memory card X. In either case, the recordings will be copied to memory card Y. Scenes and photos will be copied from the index screen or from a story in the gallery on the source memory to the same index screen or story on memory card Y.
Copying Recordings to a Memory Card Copying Scenes from a Story by Rating 1 Open the gallery and bring the desired story to the front. [b] [ Gallery] Desired story • Check that you have selected the f tab (built-in memory) or 4 tab (memory card X). 2 Open the [Play by Rating] screen. [Story Details] [Play by Rating] 3 Touch the desired rating and then touch [f] twice. 4 Open the screen to copy scenes. [Story Details] [Edit Story] [Copy (f97)] or [Copy (497)] 5 Touch [Yes].
Copying Recordings to a Memory Card To select individual photos 1 Touch on the individual photos you want to copy. • A checkmark O will appear on the photos you touch. The total number of selected photos will appear next to the o icon. • Touch a selected photo to remove the checkmark. To remove all checkmarks at once, touch [Remove All] [Yes]. 126 2 After selecting all the desired photos, touch [OK]. Options [Select] Select individual photos to copy. [All Photos] Copy all the photos.
Saving Recordings on a Computer Saving Recordings on a Computer Movies recorded with this camcorder are saved in the built-in memory or on a memory card. Because space is limited, make sure to save your recordings on a computer on a regular basis. Saving Movies (Windows only) With the supplied software Transfer Utility or VideoBrowser you can save to your computer the scenes you have recorded.
Saving Recordings on a Computer Saving Photos (Windows/Mac OS) With the supplied software Photo Application you can save photos to your computer and easily organize and edit them. Installation 128 Install the software before you connect the camcorder to the computer for the first time. See also the relevant sections in the ‘Photo Application’ Instruction Manual (r, PDF file in the [MANUALS_ENGLISH] folder on the supplied Camcorder Supplemental Disc).
Saving Recordings on a Computer • Operation may not work correctly depending on the software and the specifications/settings of your computer. • If you wish to use the image files on your computer, make copies of them first. Use the copied files, retaining the originals. NOTES • Refer also to the computer’s instruction manual. • With the supplied software VideoBrowser, you can also choose to save complete stories from the gallery.
Copying Recordings to an External Video Recorder Copying Recordings to an External Video Recorder Operating modes: In High Definition 130 Connect the camcorder to Blu-ray Disc recorders and other AVCHD-compatible digital video recorders using the supplied USB cable to make perfect copies of your movies in high definition. If the external digital video recorder has an SD memory card slot*, you can use the memory card to copy your movies without connecting the camcorder.
Copying Recordings to an External Video Recorder 4 Camcorder: Resume playback. • By default, onscreen displays will be embedded in the output video signal. You can change the displays by repeatedly pressing h (0 80). 5 External recorder: Start recording when the scene you wish to copy appears; stop recording when it ends. 6 Camcorder: Stop playback.
Uploading Movies to Video Sharing Web Sites Uploading Movies to Video Sharing Web Sites With the supplied software Transfer Utility, you can upload your scenes to your favorite video sharing Web site. To do so, you must first convert them into standard-definition scenes in the camcorder. With the supplied software VideoBrowser, you can convert and upload high-definition scenes you have transferred to your computer.
Uploading Movies to Video Sharing Web Sites 7 When the conversion is completed, a confirmation screen will appear. • Connect the camcorder to the computer at this point to continue uploading the converted videos to the Web or touch [End Without Connecting] to connect to the computer later. To select individual scenes (step 4) 1 Touch on the individual scenes you want to convert. • A checkmark O will appear on the scenes you touch. The total number of selected scenes will appear next to the o icon.
Uploading Movies to Video Sharing Web Sites NOTES 134 • The time required to convert scenes is approximately equal to the total playback time of the converted scenes. In most cases this is still faster than converting the scenes in the computer so we recommend you convert scenes in the camcorder. • If after converting the scenes you selected the [End Without Connecting] option, you will need to upload the SD movies manually when you connect the camcorder to the computer.
Uploading Movies to Video Sharing Web Sites Uploading your Videos Wirelessly If you are using an Eye-Fi card, you can automatically upload the converted SD movies to your favorite video sharing Web site. You will need to have installed the software supplied with your Eye-Fi card and completed all the required configuration setup in advance. Refer to the instruction manual of the Eye-Fi card. Please read the IMPORTANT section before using an Eye-Fi card.
Uploading Movies to Video Sharing Web Sites • You can turn off the wireless communication with the 6 [Eye-Fi Communication]* setting. • If the LOCK switch on the Eye-Fi card is set to prevent writing, you will not be able to turn the wireless communication on/off and the status icon will change to o. To use wireless communication make sure the switch on the Eye-Fi card is not in the LOCK position. * This menu option will appear only when using an Eye-Fi card.
10 Additional Information Appendix: Menu Options Lists Additional Information Appendix: Menu Options Lists Menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus (0 27). For details about each function, see the reference page. Menu options without a reference page are explained after the tables. Underlined menu options indicate default values. FUNC. Panel FUNC. Panel - Recording Modes 0 AUTO y CINEMA [MENU] Open the menus – z z 28 [Rec.
Appendix: Menu Options Lists Control Button [ 138 Setting options/Function 1 Decoration] [ [ Pens and Stamps], [ Captions]3 Animated Stamps], AUTO y CINEMA 0 z z z 102 [ ] (image mix): Toggle on or off, [C] (pause live video) – z – [ ] (minimize toolbar) z z z Story themes, [New Story] z z z 97 [Z Video Snapshot] [A On], [B Off] – z z 78 [d Pre REC]1 [A On], [B Off] – z z 79 – z z 41 [ Story Creator] [ Review Recording]1 1 2 3 – Option not available in mod
Appendix: Menu Options Lists [Edit Story] from the [Story Details] screen Control Button Title]2 [Edit Scene] from the [Scene List] screen Playback Pause 0 z – – 115 [Copy] – z – 113 [Move] – z – 113 [Divide] – – z 93 [Rating] – ], ] (others) 109 [Edit [ [ 1 2 ], [ ], [ ] (unrated), [ Operation not available for recordings on memory card Y (7 tab). Operation not available for the two preexisting stories, [Unsorted] and [Video Snapshot].
Appendix: Menu Options Lists Menu item 140 Setting options y CINEMA 0 [Camcorder Shake Indicator] [A On], [B Off] z z – [Wind Screen]1 [O Automatic], [B Off Z] z z – [Microphone Attenuator]1 [O Automatic], [A On V] z z – [ z z 69 z z 69 Normal], [ Boost LF Range], [ Low Cut Filter], Boost MF Range], [ Boost HF+LF Range] z z 68 [Built-in Mic Directionality]1 [ Monaural], [ z z 67 [Surround Mic Directionality]1, 2 Surround], [ z z – [MIC Terminal Input] [Audio Mix]1
Appendix: Menu Options Lists [Conversion Lens]: When you attach to the camcorder the optional TL-H58 Tele-converter or WD-H58W Wide-converter, set the appropriate conversion lens setting. The camcorder will then optimize the image stabilization and adjust the minimum object distance. The minimum object distance throughout the entire zoom range will be 130 cm for the TL-H58 and 40 cm for the WD-H58W. • When you select a setting other than [B Off], the AF mode is automatically set to [S Normal AF].
Appendix: Menu Options Lists y / z Playback Setup 1 2 0 z z 110 [External Audio Input] [B Off], [A On ] When [A On ] - [External Player Link]: Toggle on or off z z 111 [Data Code] z z – – z 123 z z – Menu item [Select Music] 142 Setting options [B Off], [A On]1 When [A On] - list of music tracks, [1] (Original sound/Background music) [b] [B Off], [I Date], [J Time], [K Date and Time], [L Camera Data] [Slideshow Transition] [B Off], [i Dissolve], [j Slide Image] 2 [TV Type] 1 2 [F
Appendix: Menu Options Lists Menu item Setting options y CINEMA 1 2 0 – – z – 96 z z – – – [Photo Capture from Video]3 [A Single Photo], [B Photo Sequence] [Scan Reverse Rec]1 [B Off], [ [Memory Info] [f] (built-in memory), [4] (memory card X), [7] (memory card Y) z z z z – [x.v.
Appendix: Menu Options Lists 6 System Setup y CINEMA 1 2 0 [Output Onscreen Displays] [A On], [B Off] z z z z – [Language a] [ ], [Dansk], [Deutsch], [ ], [English], [Español], [Français], [Italiano], [Magyar], [Melayu], [Nederlands], [Norsk], [Polski], [Português], [ ], [Suomi], [Svenska], [Türkçe], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ] z z z z 29 [LCD Brightness] k z z z z – [LCD Screen Dimmer] [A On], [B Off] z z z z – [LCD Mirror Image] [A On], [B Off] z z – –
Appendix: Menu Options Lists Menu item Setting options [Power Saving Mode] [Auto Power Off]: [B Off], [A On] [Initialize f/g] [f Built-in Mem.], [4 Mem. Card A], [7 Mem.
Appendix: Menu Options Lists [LCD Mirror Image]: When set to [A On], you can rotate the LCD panel 180 degrees to let the subject check the image while you record. While the LCD panel is rotated toward the subject you will not be able to decorate the scene. [Notification Sounds]: A beep will accompany some operations like turning on the camcorder, the selftimer countdown, etc. • While pre-recording (0 79) is activated, the camcorder will not emit any notification sounds.
Appendix: Menu Options Lists • The remote control of the TV can only be used to play back movies or photos ( or mode only). If the camcorder is connected to the TV while it is set to a recording mode, depending on the TV used, turning off the TV will automatically turn off the camcorder even if it is recording at the time. • We recommend not connecting more than 3 HDMI-CEC compatible devices at a time.
Appendix: Onscreen Icons and Displays Appendix: Onscreen Icons and Displays Recording Movies (using Story Creator) 6 148 1 2 3 4 5 6 7 8 1 2 3 9 10 11 4 12 5 13 14 Control button [FUNC.]: Open the FUNC.
Appendix: Onscreen Icons and Displays , Recording Movies y Manual mode CINEMA mode 48 49 22 23 24 7 25 8 2627 1 15 16 17 18 19 20 21 9 28 11 29 30 31 32 33 5 50 1 44 45 17 18 46 47 34 35 36 37 38 39 40 41 42 43 15 Recording program (0 55, 62) 16 Exposure compensation (0 58) 17 AGC limit (0 54); Gain (during the [y Manual Exposure] recording program) (0 57) 18 Instant AF/ Medium AF/ N Normal AF (0 139), MF Manual focus (0 45) 19 Face detection (0 47) 20 White balance (0 60) 21 Audio level indicator
Appendix: Onscreen Icons and Displays Playing Movies (during playback) 11 7 52 53 9 23 54 150 51 55 56 14 55 Data code (0 80, 142) 56 Volume and background music balance controls (0 87, 111) 51 Playback control buttons (0 86) 52 External audio input (0 111) 53 Eye-Fi wireless communication (0 135) 54 Scene number Viewing Photos 57 58 9 59 60 61 55 62 63 57 Control button [MENU]: Open the setup menus (0 139) 58 Control button [Edit]: Open the Edit panel (0 139) 59 Current photo / Total number of p
Appendix: Onscreen Icons and Displays 7 Memory operation N Record, M Record pause, A Playback, C Playback pause, I Fast playback, J Fast reverse playback, G Slow playback, H Slow reverse playback, E Frame advance, F Frame reverse. 9 Remaining battery time • The icon shows a rough estimate of the remaining 100% 75% 50% 25% 0% charge as a percentage of the full charge of the battery pack. The remaining recording/playback time of the battery pack is displayed, in minutes, next to the icon.
Troubleshooting Troubleshooting If you have a problem with your camcorder, refer to this section. Sometimes what you think is a malfunction of the camcorder may have the simplest of solutions - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists.
Troubleshooting Recording Pressing g will not start recording. - You cannot record while the camcorder is writing previous recordings onto the memory (while the ACCESS indicator is on or flashing). Wait until the camcorder has finished. - The memory is full or it already contains the maximum number of scenes (3,999 scenes). Delete some recordings (0 90, 122) or initialize the memory (0 35) to free some space. The point where g was pressed does not match the beginning/end of the recording.
Troubleshooting 154 When playing back scenes/slideshow with background music, the music track is not played back correctly. - This can occur when you transfer the music files to a memory card after repeatedly recording and deleting scenes (fragmented memory). Save your recordings (0 127) and initialize the memory card (0 35). Then, transfer the music files first and only then transfer the video files.
Troubleshooting o appears on the screen - The LOCK switch on the Eye-Fi card is set to prevent accidental erasure. Change the position of the LOCK switch. - An error occurred when trying to access control data on the Eye-Fi card. Turn the camcorder off then on again. If the icon appears often, there might be a problem with the Eye-Fi card. Contact the card manufacturer’s customer care. Picture and Sound The screen appears too dark. - The LCD screen was dimmed.
Troubleshooting Memory Card and Accessories Cannot insert the memory card. - The memory card was not facing the correct direction. Turn the memory card over and insert it. 156 Cannot record on the memory card. - The memory card is full. Delete some recordings (0 90, 122) to free some space or replace the memory card. - Initialize the memory card (0 35) when you use it with the camcorder for the first time. - The LOCK switch on the memory card is set to prevent accidental erasure.
Troubleshooting The camcorder is connected using the supplied HDMI cable, but there is no picture or sound from the HDTV. - Disconnect the HDMI cable and then restore the connection or turn the camcorder off and then on again. The camcorder is connected using the supplied HDMI cable, but HDMI-CEC does not work (cannot play back using the TV’s remote control). - Disconnect the HDMI cable and turn off the camcorder and the TV. After a short while turn them on again and restore the connection.
Troubleshooting Cannot communicate with the battery pack. Continue using this battery pack? - You attached a battery pack that is not recommended by Canon for use with this camcorder. - If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the camcorder or battery pack. Consult a Canon Service Center. 158 Cannot convert - Cannot access the memory card. Check the memory card and make sure it is inserted correctly.
Troubleshooting Cannot play the movies in the built-in memory Initialize only using the camcorder - The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this camcorder (0 35). Cannot play the movies on this memory card Initialize only using the camcorder - The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder (0 35).
Troubleshooting 160 Do not disconnect the power source. Cannot write data with this connection. To write data to the camcorder, connect the compact power adapter then reconnect the camcorder and computer. Do not disconnect the USB cable unless you first use the computer to safely end the connection. - The camcorder cannot be operated while it is not being powered by the compact power adapter and is connected to a computer with the supplied USB cable.
Troubleshooting Memory card is full - The memory card is full. Delete some recordings (0 90, 122) to free some space or replace the memory card. Memory card is write-protected - The LOCK switch on the memory card is set to prevent accidental erasure. Change the position of the LOCK switch. Need to recover files from the memory card. Change the position of the LOCK switch on the memory card.
Troubleshooting There are no scenes with the selected rating - No scenes have been rated yet. Rate the scenes as you like (0 109). - The criteria you used to select scenes by rating resulted in no applicable scenes. Change the criteria used to select scenes by rating. This memory card contains scenes. Delete all scenes to use relay recording. - Save your movies (0 127) if necessary, and delete all the movies from the memory card (0 90).
Handling Precautions Handling Precautions Camcorder Be sure to observe the following precautions to ensure maximum performance. • Save your recordings periodically. Make sure to transfer your recordings to an external device such as a computer or digital video recorder (0 124) and save them on a regular basis. This will protect your important recordings in case of damage and create more free space on the memory. Canon shall not be liable for any data loss. • Do not carry the camcorder by the LCD panel.
Handling Precautions Battery Pack DANGER! 164 Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 60 °C. Do not leave it near a heater or inside a car in hot weather. • Do not try to disassemble or modify it. • Do not drop it or subject it to shocks. • Do not get it wet. • Dirty terminals may cause a poor contact between the battery pack and the camcorder. Wipe the terminals with a soft cloth.
Handling Precautions • Secure Digital (SD) memory cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the card’s content. To write-protect the memory card set the switch to the LOCK position. Built-in Rechargeable Lithium Battery LOCK switch The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings.
Maintenance/Others Maintenance/Others Cleaning Camcorder Body 166 • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens, Viewfinder and Instant AF Sensor • If the lens surface or Instant AF sensor is dirty, autofocus may not work properly. • Remove any dust or dirt particles using a non-aerosol type blower brush. • Use a clean, soft lens-cleaning cloth to gently wipe the lens or viewfinder. Never use tissue paper.
Maintenance/Others Using the Camcorder Abroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use. Playback on a TV Screen You can only play back your recordings on TVs compatible with the PAL system.
Accessories Accessories (Availability differs from area to area) The following optional accessories are compatible with this camcorder. Select accessories are described in more detail in the following pages.
Accessories Optional Accessories Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Accessories Using the built-in memory Battery pack 170 BP-808 BP-809 BP-819 BP-827 Recording (maximum) Recording (typical)* LCD Viewfinder LCD Viewfinder LCD MXP 110 min. 120 min. 65 min. 70 min. 150 min. FXP 110 min. 120 min. 65 min. 70 min. 155 min. XP+ 115 min. 125 min. 65 min. 75 min. 155 min. SP 115 min. 125 min. 70 min. 75 min. 155 min. LP 115 min. 125 min. 70 min. 75 min. 155 min. MXP 225 min. 240 min. 140 min. 150 min. 310 min. FXP 230 min. 245 min.
Accessories TL-H58 Tele-converter This Tele-converter lens increases the focal length of the camcorder lens by a factor of 1.5. • The image stabilizer is not as effective when the Tele-converter is attached. • The minimum focusing distance at full telephoto with the Teleconverter is 1.3 m. WD-H58W Wide-converter This Wide-converter lens decreases the focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views.
Accessories DM-100 Directional Stereo Microphone This highly sensitive, super-directional microphone attaches to the camcorder’s mini advanced shoe. It can be used as directional microphone (monaural) or stereo microphone. 172 ZR-2000 Zoom Remote Controller When the ZR-2000 is connected to the REMOTE terminal, it is possible to control functions such as the start and stop of recording, the zoom and the focus functions without touching the camcorder.
Specifications Specifications LEGRIA HF G10 — Values given are approximate figures. 173 System • Recording System Movies: AVCHD Video compression: MPEG-4 AVC/H.264; Audio compression: Dolby Digital 2ch; Dolby Digital 5.1ch* * Only when using the optional SM-V1 Surround Microphone. Photos: DCF (Design rule for Camera File system), compatible with Exif* Ver. 2.2 Image compression: JPEG * This camcorder supports Exif 2.2 (also called “Exif Print”).
Specifications • Filter Diameter: 58 mm • Minimum Focusing Distance 60 cm; 2 cm at full wide angle • White Balance Auto white balance, Custom white balance (2 settings), User-defined color temperature or Preset white balance settings: Daylight, Shade, Cloudy, Fluorescent, Fluorescent H, Tungsten 174 • Minimum Illumination 0.1 lx ([Low Light] recording program, Shutter speed at 1/2) 1.
Specifications CA-570 Compact Power Adapter • Power supply: 100 – 240 V AC, 50/60 Hz • Rated output / consumption: 8.4 V DC, 1.5 A / 29 VA (100 V) – 39 VA (240 V) • Operating temperature: 0 – 40 °C • Dimensions: 52 x 29 x 90 mm • Weight: 135 g BP-808 Battery Pack • Battery type Rechargeable lithium ion battery, compatible with Intelligent System • Rated voltage: 7.4 V DC • Operating temperature: 0 – 40 °C • Battery capacity: 890 mAh (typical); 6.3 Wh / 850 mAh (minimum) • Dimensions: 30.7 x 23.
Specifications About the music files The specifications of the music files compatible with the camcorder are as follows. Audio encoding: Linear PCM Audio sampling: 48 kHz, 16 bits, 2 channels Minimum length: 1 second File type: WAV 176 The music data is saved in the memory under the following folders. In the built-in memory: \CANON\MY_MUSIC\MUSIC_01.WAV to MUSIC_99.WAV On the memory card: \CANON\PRIVATE\MY_MUSIC\MUSIC_01.WAV to MUSIC_99.
Index 3D Flip View . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 A Abroad, using the camcorder . . . . . . . . . . . 167 AGC (automatic gain control) limit . . . . . . . . . 54 Aperture (f number) . . . . . . . . . . . . . . . . . . . . . 55 Aspect ratio of a connected TV (TV type) . . . . . . . . . . . . . . . . . . . . . . . . . 142 Assignable buttons . . . . . . . . . . . . . . . . . . . . . 83 Audio equalizer . . . . . . . . . . . . . . . . . . . . . . . . 68 Audio mix . . . . . . . . . . .
Manual exposure . . . . . . . . . . . . . . . . . . . . . . .57 Manual focus . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141 Memory card . . . . . . . . . . . . . . . . . . . . . . .31, 164 Menu settings, saving and loading . . . . . . . . .84 MIC terminal . . . . . . . . . . . . . . . . . . . . . . . .72, 73 Microphone attenuator . . . . . . . . . . . . . . . . . .141 Microphone directionality . . . . . . . . . . . . . . .
Z Zebra pattern . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Digital zoom . . . . . . . . . . . . . . . . . . . . . . 140 Soft zoom control . . . . . . . . . . . . . . . . . . . 52 Zoom speed level . . . . . . . . . . . . . . . . . . .
Canon Europa N.V. Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands www.canon-europa.com Canon UK Ltd CCI Service Centre, Unit 130, Centennial Park, Borehamwood, Hertfordshire, WD6 3SE, United Kingdom Telephone 0870-241-2161 Canon Australia Pty Ltd Tel: 13-13-83 (within Australia only) (61) 02-9805-2555 www.canon.com.au Canon New Zealand Ltd Tel: 0800-222-666 (within New Zealand only) (64) 09-489-0300 www.canon.co.nz Canon Singapore Pte.
