VK-64_SetGuide_US.book i ページ 2009年3月4日 水曜日 午後3時19分 Network Video Recorder VK-64/VK-16/VK-Lite Setup Guide C Y P O Ver. 2.
VK-64_SetGuide_US.book ii ページ 2009年3月4日 水曜日 午後3時19分 Introduction Thank you for purchasing Network Video Recorder VK-64 v2.1/VK-16 v2.1 (hereafter referred to as VK-64/ VK-16), or VK-Lite v2.1 (hereafter referred to as VK-Lite). VK-64/VK-16 and VK-Lite are software for recording and monitoring video via a network, and includes storage server software and viewer software. Read this guide thoroughly before using the software to build a network camera recording and monitoring system.
Introduction MPEG-4 NOTICE ABOUT THE MPEG-4 VISUAL STANDARD: THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
VK-64_SetGuide_US.book iv ページ 2009年3月4日 水曜日 午後3時19分 Contents Introduction ................................................................................................................................ ii About This Guide ....................................................................................................................... v System Operation Overview ..................................................................................................... vi Overview of VK-64/VK-16 .
VK-64_SetGuide_US.book v ページ 2009年3月4日 水曜日 午後3時19分 About This Guide This guide is intended for the following users. • System administrators who install and manage VK-64/VK-16 • System administrators who install and manage VK-Lite This guide first explains what you should know before operating a network camera monitoring system, and differences between VK-64/VK-16 and VK-Lite.
VK-64_SetGuide_US.book vi ページ 2009年3月4日 水曜日 午後3時19分 System Operation Overview Overview of VK-64/VK-16 Network Video Recorder Network Video Recorder is software for viewing video, recording video and audio, and playing video from multiple network cameras (hereafter referred to as camera servers). VK-64/VK-16 and VK-Lite enable viewing and recording of JPEG and MPEG-4 video, two-way audio communication, and audio recording.
VK-64_SetGuide_US.book vii ページ 2009年3月4日 水曜日 午後3時19分 System Operation Overview VK-64 Viewer (Viewer Only) You need to purchase the required number of viewer licenses to use additional viewers. Also, VK-64 Viewer is suitable for a monitoring system, in which you need just monitoring, not recording. You can view live videos from and control up to 64 camera severs.
VK-64_SetGuide_US.book viii ページ 2009年3月4日 水曜日 午後3時19分 Specification Comparison of VK-64/VK-16 and VK-Lite VK-Lite is Network Video Recorder which is supplied with VB-C500D and VB-C60. Although VK-Lite basically provides the same functionalities as VK-64/VK-16, there are some functional limitations as follows, since VK-Lite is a simplified version of VK-64/VK-16. Type Main functional limitations Max.
VK-64_SetGuide_US.book ix ページ 2009年3月4日 水曜日 午後3時19分 System Configuration Examples A combination of storage servers and viewers enables various types of system configurations, such as a simple system with one PC and one camera server, or a system using multiple PCs and camera servers. Case1 Viewing and Recording on a Single PC You can configure a system with one PC as both a storage server and a viewer.
VK-64_SetGuide_US.book x ページ 2009年3月4日 水曜日 午後3時19分 System Configuration Examples Case3 Using Multiple Storage Servers and Viewers Up to 10 storage servers can be used on a single network. When multiple camera servers are used in a system, you can use one of them as a master storage server, and use the others as slave storage servers.
VK-64_SetGuide_US.book xi ページ 2009年3月4日 水曜日 午後3時19分 Important: Before Starting Operation Please be sure to perform operational tests in the actual environment before starting operation. Be aware of the following points prior to operation. z Video recording and live viewing may not be done as your settings, depending on the network environment and the PC's performance.
VK-64_SetGuide_US.
VK-64_SetGuide_US.
VK-64_SetGuide_US.book 2 ページ 2009年3月4日 水曜日 午後3時19分 Setup Procedure This chapter describes the installation process from preparation to maintenance. See Administrator’s Manual for detailed explanations of each step. Step1 Preparation Before installation, check the free space of the hard drive required for a storage server, considering the video retention period and recording conditions, and then prepare necessary equipments.
VK-64_SetGuide_US.book 3 ページ 2009年3月4日 水曜日 午後3時19分 Setup Procedure Step5 Camera Server Registration 1 Location Tokyo branch Zones See "Chapter 4 Register Camera Server and Set Recording Schedule" Sales floor Step6 Cash desk Parking lot Recording Schedule Configuration Y P O Recording schedule settings are available for each camera server, such as continuous recording, motion detection recording, sensor event recording.
VK-64_SetGuide_US.
VK-64_SetGuide_US.
VK-64_SetGuide_US.book 2 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example This chapter explains the process from installation to the operational management with an example of a VK-Lite surveillance system based on the following recording conditions. Recording Conditions Number of camera servers 4 Video size VGA (640 x 480) Video quality Standard (Video data size approx. 50KB*1) Recording frame rate 1 fps Video retention period 14 days *1 May vary depending on the camera.
VK-64_SetGuide_US.book 3 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example Step 1: Preparation Calculate how much free hard disk space will be required for the storage server from the recording conditions to ensure that the system can operate stably. The amount of hard disk space required can be calculated using the following formula. Required free hard disk space VK-Lite Installation = No. of cameras x Video data size x Recording frame rate x Video retention period (sec.
VK-64_SetGuide_US.book 4 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example Step 3: Installation Install the VK-Lite storage server software on the PC for storage server and the VK-Lite Viewer software on the PC for viewer, using the CD-ROM supplied with the network camera. In the following example, VK-Lite storage server and VK-Lite Viewer are installed on a single PC. Before Installation The installation drive and the drive for storing recorded video should be formatted in NTFS.
VK-64_SetGuide_US.book 5 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example 6. Click [Finish]. Now the installation has completed. Tip If you are running a system with multiple PCs, you need to install the software on each of the PCs. VK-Lite Installation Reference "Chapter 2 Installation" in Administrator’s Manual Step 4: Storage Server Configuration Start up "VK-Lite Storage Server Configuration" for storage server settings.
VK-64_SetGuide_US.book 6 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example 3. Configure the basic storage server settings. In this example, we use the "Recording Conditions" ( P. 2-2) and the hard disk space calculated in "Step 1: Preparation" ( P. 2-3). • Set the [Maximum retained history] to 14 days. • Use the default value of 10% for the [Low disk space warning level] (A value of 10% or more is recommended). • Set the [Maximum disk space used] to 300 GB.
VK-64_SetGuide_US.book 7 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example 4. If the system is to be used by multiple users, you need to add users using the [User Management] tab. • Click [Add] and set the user name and password. • To assign administrative privileges to the user, check the [Administrator] checkbox. VK-Lite Installation Note C Y P O It is strongly recommended that before operation, you change the user name "admin" and password created after installation.
VK-64_SetGuide_US.book 8 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example Step 5: Camera Server Registration Start up VK-Lite Viewer to register camera servers. When VK-Lite Viewer is run for the first time, no video is displayed in the viewer screen. To display video in the viewer screen, register a camera server and then arrange the video window on the viewing area. 1. Double-click the [VK-Lite Viewer v2.1] icon on the Desktop.
VK-64_SetGuide_US.book 9 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example 4. Select [View] [Configuration] from the menu. The [Configuration and Preferences] screen is displayed. VK-Lite Installation 5. Click the [Locations/Zones] tab to create locations and zones. Tip C Y P O z You can set location names to identify each monitoring site, for example "Office Building", "Store", etc.
VK-64_SetGuide_US.book 10 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example 7. Select a camera server to register, and then click [Add Camera Server]. The [Add Camera Server] dialog box is displayed. 8. Configure the following settings in the [Add Camera Server] dialog box. Y P O • Enter the [User Name] and [Password], and then click [Connect]. Make sure that the live view is displayed in the [Preview] window.
VK-64_SetGuide_US.book 11 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example 12. Click [Save Changes]. The registered camera information is saved. VK-Lite Installation Reference Y P O "Chapter 4 Register Camera Server and Set Recording Schedule" in Administrator’s Manual Step 6: Recording Schedule Configuration Configure the recording schedule settings after camera server registration.
VK-64_SetGuide_US.book 12 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example 3. Configure the following settings. • Click [All Day]. • Check the Monday to Sunday checkboxes. • Select "1 fps" from the drop-down list for recording frame rate. 4. Click [OK]. C Y P O The configured schedule is displayed in the schedule area. 5. Check that the settings are correct and click [Save Schedule]. The schedule is saved. Tip You can only select [Normal Schedule] in VK-Lite.
VK-64_SetGuide_US.book 13 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example Step 7: Viewer Settings The following example shows how to configure the basic settings for viewer, create a layout, and display video. Basic Viewer Settings 1. Click the [Viewer Settings] tab in the [Configuration and Preferences] screen. The default value of the maximum frame rate is "5 fps". You can select from the following frame rates. 0.1, 0.2, 0.
VK-64_SetGuide_US.book 14 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example 3. In the Camera Selection Area, drag a thumbnail onto the grid in the Viewing Area. 4. Drag the video window to the position you want to display. When you release the mouse, the size and position are automatically adjusted to match the layout frame. Y P O To change the size of video windows, click and drag any corner of the window.
VK-64_SetGuide_US.book 15 ページ 2009年3月4日 水曜日 午後3時19分 VK-Lite System Installation Example 6. Right-click on the Viewing Area and select [Save] from the menu. VK-Lite Installation Now, the configuration process has been completed. Tip z The aforementioned example shows a layout example using [Default Shared Layout] displayed by default. You can create and save new layouts under any name.
VK-64_SetGuide_US.book 16 ページ 2009年3月4日 水曜日 午後3時19分 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON EUROPA N.V. Bovenkerkerweg 59-61, P.O. Box 2262, 1185 XB Amstelveen, The Netherlands CANON U.S.A.,INC. One Canon Plaza Lake Success, NY 11042-1198 USA CANON EUROPE LTD. 6 Roundwood Avenue, Stockley Park, Uxbridge Middlesex, UB11 1JA, United Kingdom ● If you have any questions, call the CANON U.S.A. Information Center toll-free at 1-800-828-4040 (U.S.A.