User`s manual

Still Image Recording Service
5
111
Setting Up the Still Image Service
2
c
Caution
■ "Call CGI" Parameters
The values shown in the table below can be substituted in the following at CGI startup:
<image_file>
<image_directory>
<image_path>
Content
Example
Image file name
Parameter
image_file
Photo1
Folder
image_directory
Image1
Path to the images
image_path
Image1/Photo1_03...
If you specify a local folder as the upload destination, always specify the
basic path in the "Local directory setting" field (see P.114) in the
"Upload destination" dialog box, and specify the relative path after that.
For example, when the local directory setting specification in the "Connect" tab is:
C:\Program Files\Canon\WebView\DownloadRoot\Upload
and the upload destination is:
C:\Program Files\Canon\WebView\DownloadRoot\Upload\Image1,
the specification for the upload destination folder is the relative path, as follows:
Image1
Note that images are not saved if this path is not specified correctly.
After you have changed the settings, click the [OK] button.
To discard the changes, click the [Cancel] button.