User`s manual

Notes on Using the Software

This section provides some points to note and items to refer to when you are using WebView

Livescope camera server software.

Connection distance between the camera server and the

camera (VC-C4/VC-C4R/VC-C3/VC-C1 MK-II)

Use a cable no longer than 15 meters, as stipulated in the RS-232C standard. Successful

operation cannot be guaranteed if a cable longer than 15 meters is used. (When using cascade

connections, a cable no longer than 15 meters should be used to connect each camera. Refer

to P.18 for information on cascade connections.)

When a WWW server is running on the same computer as the

camera server

Use the WWW server function.

* For more information on using a proxy web server, refer to "Setting the Web Server Functions"

on P.53.

For subjects not suited to auto focusing, such as night scenes

or objects with no light-dark contrast, set the camera to "Far

Fixed".

* For more information on the auto focus settings, see "Changing the Camera Settings" on P.38.

If the camera server is connected to the internet or an intranet,

1 fixed IP address is always required.

* Dynamic IP addresses using DHCP cannot be assigned.