User`s manual

30
Selecting the Settings
1
2
Setting the Limits for Connection to the Camera Server
Setting the connection limits
In the "Connection Limitation" setup window, click
the "Connection Limit" tab.
Item
Max
connect Time
10
Details Default Value
Specifies the number of minutes for which video clients can be
connected to the WebView server. When the specified time is
exceeded, the client is automatically disconnected. If "0" is
specified as the connection time, there are no restrictions on
the connection time.
10
Sets the limit on the number of viewers connected using the
WebView-HTTP protocol. The limit can be set to any value between 0
and 100 clients.
10
5
Sets the limit on the number of viewers connected using the
WebView-TCP. The limit can be set to any value between 0 and 100
clients.
Limit of each
client's connect count
HTTP-
connect
viewer
TCP-
connect
viewer
Proxies
(distribution servers, etc.)
Sets the maximum number of connected video relay modules,
such as distribution servers. The limit on the number of video
relay modules can be set to any value between 0 and 20.
No check
Disable camera control
by normal user
Specifies whether ordinary viewers can control the camera. Putting a
tick in the checkbox prevents ordinary clients from controlling the
■ "Connection Limit" Settings
c
Caution
a
IMPORTANT
After you have changed the settings, click the [OK] button.
To discard the changes, click the [Cancel] button.
You cannot set a number of connected clients that exceeds 100 in total. The
default settings for the maximum numbers of connections are 10, 10 and 5
respectively.