User`s manual

34
e
Note
Selecting the Settings
1
2
Setting the Video Parameters
Under "Video parameters" you can set the quality and size of the image provided to clients.
Display the "[server name] (Local Server) Setup"
window and double-click "Video parameters".
The "Video Parameters" setup window appears.
The following icons and buttons are used to specify
the video parameter settings:
Default icon
Denotes that the default image size is selected.
This setting can be changed by clicking the
mouse in the "Default" area.
Enable checkbox
When this checkbox is ticked, the image can be
sent.
[Enable/Disable] button
When the image size is highlighted, this button
can be used to select whether that image size
can be sent.
[Default] button
When the image size is highlighted, this button
resets the image size to the default image size.
Selecting 640 × 480 increases the load on the camera server and network. Use this
setting for internal LAN connections, etc. Note also that the default image size is the
initial transmission size when the viewer was connected.