User`s manual

Camera Server Setting
2
35
Setting Up the Camera Server
3
Item
Details Default Value
3.0fps
Sets the image capture rate. The capture rate can be set to
any value between 0.1 and 30 fps (frames per second).
Fractions up to 1 decimal place can be specified.
Capture Rate
30
Sets the JPEG compression quality. The quality can be set to
any value between 1 and 99. Higher settings give better
image quality but may reduce the video frame rate.
Quality of
compression
320×240
Sets the default image size specified in the viewer when the
viewer was launched. Four sizes can be selected: 640×480,
320×240, 160×120 and 80×60.
Default
320×240
and below
Sets the image size that can be sent to a client. Four sizes can
be selected: 640×480, 320×240, 160×120 and 80×60. Putting a
tick in the checkbox allows the corresponding image size to be
sent. The Send image size option for the size specified in
"Image size default" is automatically set to ON.
Enable
c
Caution
The frame rate at which the viewer receives the video varies depending on
the performance of the computer and the network. Because the principal
restriction is the image transmission speed, the frame rate may be slower
than the capture rate. To increase the frame rate, reduce the compression
quality or select a smaller image size.
a
IMPORTANT
■ "Video Parameters" Settings
After you have changed the settings, click the [OK] button.
To discard the changes, click the [Cancel] button.