User`s manual

Camera Server Setting
2
39
Setting Up the Camera Server
Selecting the Settings
1
2
c
Caution
Changing the Camera Settings
Changing "Camera setting"
Display the setup window for the current camera
and click the "Camera setting" tab.
■ "Camera setting" settings
Item
Details Default Value
Camera number
Sets the name of the camera being used.
Camera Name
None
COM1
Specifies whether a wide-angle lens is used on the current
camera. A tick in the checkbox indicates that a wide-angle
lens is being used.
Wide convertor
COM port address
Sets the serial port to which the camera is connected.
03:00
Power Off time
Sets the time at which the camera is switched off. Because
the auto-focusing may fail to work effectively if the camera is
used for an extended period, the camera must be switched off
at least once a day. Enter a time in the <hour>:<minute>
format.
03:01
Power On time
Sets the time at which the camera is switched on. Because
the autofocusing may fail to work effectively if the camera is
used for an extended period, the camera must be switched off
at least once a day. Enter a time in the <hour>:<minute>
format.
Auto
Sets the camera shutter speed.
■ VC-C3: Either Auto (1/60) or Auto (1/100) can be selected.
■ VC-C1 MK-II, VC-C4, VC-C4R:Either Auto, 1/60 or 1/100 can
be selected.
■ NTSC: For PAL-version cameras, 1/60 is changed to 1/50 and
1/100 is changed to 1/120.
Shutter speed
Autofocus
Placing a tick in the "Far Fixed" checkbox switches off the
camera's autofocus feature and fixes the focus at infinity.
Focus
The Focus setting only functions on the VC-C3 and is not available on the
VC-C1.
After you have changed the settings, click the [OK] button.
To discard the changes, click the [Cancel] button.