User`s manual

40
Selecting the Settings
1
2
Changing the Camera Settings
Changing the image source
You can set the type of video input port and signal.
Display the setup screen for the camera being
used and click the "Video Source Setting" tab.
■ "Video Source Setting" settings
Item
Details Default Value
Composite1
Sets the video input port
Capture Channel
NTSC
Sets the type of video signal
Capture Format
After you have changed the settings, click the [OK] button.
To discard the changes, click the [Cancel] button.
c
Caution
The number of video input ports and the ports that can be used concurrently
for multiple input differ depending on the type of video capture board.
● Meteor,Meteor/PPB
Expansion port
S-Video
Composite1
Composite 1 and S-Video can be used.
Optional cables can be used to add 4
more ports (Composite 2-5). However,
Composite 1 and 2 cannot be used
concurrently, nor can Composite 4 and S-
Video.
● Meteor-II
Expansion port Composite1
Composite 1 can be used.
Optional cables can be used to add 6
more ports (Composite 2-5 and S-Video 1-
2). However, Composite 1 and 2 cannot be
used concurrently, nor can S-Video 1 and
Composite 1-3 or S-Video 2 and
Composite 4-5.
● Osprey-100
S-Video Composite3 Composite2 Composite1
Composite 1-3 and S-Video can be used.
Some models do not have a Composite 3
port.
The expansion port cables and colors are Composite 2 (red),
Composite 3 (green), Composite 4 (blue) and Composite 5 (black).
The expansion port cables and colors are Composite 2 (red),
Composite 3 (green), Composite 4 (blue), Composite 5 (black),
S-Video 1 (red/green) and S-Video 2 (blue/black)