User`s manual

Selecting the Settings

Changing the Camera Settings

Selecting Panorama Images

The procedure below describes how to photograph a panorama image and how to specify the

settings for panorama photography.

Display the setup screen for the camera being used and click the "Panorama Setting"

tab.

Item

Details Default Value

Off

Specifies whether backlight compensation is on or off when

images are photographed.

Back light adjust

Center of the

panorama image

Specifies whether the AE lock position when images are

photographed is in the middle of the panorama image or in the

initial camera position.

Position of AE Lock

(VC-C4/VC-C4R

/VC-C3)

Displays the currently registered panorama

image (blank if no image is registered).

Shows the date and time when the currently

registered panorama image was shot.

Erases the currently registered panorama

image.

Photographs a new panorama image.

■ "Panorama Setting" settings

Set the photography parameters and click the

[Capture] button to take the picture.

The camera automatically photographs the entire

field of view divided into 40 segments (VC-C4),

65 segments (VC-C4R), 21 segments (VC-C3) or

15 segments (VC-C1 MK-II).

IMPORTANT