User`s manual

Camera Server Setting
2
55
Setting Up the Camera Server
3
4
Click the "Log analysis" tab. In this tab, you can
change the authentication setting for the access
log analysis tool (see P.63).
Tick the "Enable access from browser" checkbox
and set the password. This allows the access log
analysis URL (http://192.168.100.10*/-wvdoc-01-/
As) to be accessed directly from the browser and
access log analysis to be performed.
* Example When the camera server IP address
is set to 192.168.100.10.
Item
Details Default Value
ON
Specifies whether the TCP video server log is collected. When
this checkbox is ticked, the log can be collected. If you collect
the log, you must specify the access log storage location.
TCP Protocol
ON
Specifies whether the HTTP video server log is collected.
When this checkbox is ticked, the log can be collected. If you
collect the log, you must specify the access log storage
location.
HTTP Protocol
ON
Specifies whether the camera control server log is collected.
When this checkbox is ticked, the log can be collected. If you
collect the log, you must specify the access log storage
location.
Camera control
ON
Specifies whether the remote maintenance server log is
collected. When this checkbox is ticked, the log can be collected.
If you collect the log, you must specify the access log storage
location. However, the remote maintenance log cannot be
changed via a remote connection.
Remote
Maintenance
<WebView
installation
path\log>*
Specifies the folder created for the log files.
Directory
* The default path is C:\Program Files\Canon\WebView\Sys\log
■ "Log" Settings
a
IMPORTANT
After you have changed the settings, click the [OK] button.
To discard the settings, click the [Cancel] button.