User`s manual

96
No
Specifies the applet (Glimpse) file name. Code as "Glimpse.class". The applet
(Glimpse) is only downloaded if this parameter is specified correctly.
code
No
The directory in which applets are held. This parameter is coded in the following
format:
http://HTTP conversion server IP address:port number/folder/.
The "HTTP conversion server IP address" portion can be specified using the host
name, but because a security violation arises on some web browsers when the host
name cannot be referenced by DNS, always specify the IP address. The applet
(Glimpse) is only downloaded if this parameter is specified correctly. The default
folder specification is "-wvdoc-01-/Glimpse".
codebase
Yes
Specifies the comment text displayed as an overlay in the applet window (Japanese
cannot be used). If this parameter is omitted, no comment is displayed.
comment
Yes
Specifies the host name displayed on the applet (Japanese text cannot be used).
This name is used in messages as the host name during connection, etc. If this
parameter is omitted, no host name is shown.
hostname
Yes
This function superimposes the frame count on the video image. Specify "on" or "off".
The default setting is "off".
show_counter
Yes
This function superimposes the host name on the video image. Specify "on" or "off".
The default setting is "off". Note that this parameter is only valid when the
"hostname" parameter is specified.
show_hostname
Yes
Specifies the time interval for image updating (in milliseconds). Because the interval
used varies depending on the performance of the computer, the update interval
specified here is not guaranteed. If this parameter is omitted, the image is updated
every 5 seconds. Because the Glimpse applet is intended to be used for displaying
lists of multiple sites, parameters of this time are provided as a way of reducing the
load. Intervals between 0 and 300,000 ms (5 minutes) can be specified. If 0 is
specified, time interval adjustment is not performed.
sleep
No
Sets the URL that specifies the HTTP conversion server and the HTTP conversion
server IP address and port number. Connection to the HTTP conversion server is
only performed if this parameter is specified correctly. The IP address and port
number specified in this parameter must match the IP address and port number
specified in the codebase parameter.
url
No
Specifies the size of the area assigned for use by the applet (in pixels). In Glimpse,
because the applet area and the display area are the same size, you should specify
the width and height of the image itself.
width
height
Parameter
Description
Can be set
Eg. For an image size of 320x240, specify width=320 and height=240.
Yes
This parameter specifies the size at which the image is captured. The following
settings can be specified: "640x480", "320x240", and "80x60". If this parameter is
omitted, optimum values for width and height will be set automatically.
capture_size
■ Glimpse