Specifications

Authored by Simon Adams Product Support Specialist Canon UK RCC December 05

Next you will need to set your Wireless settings. Use Auto or 11g only, as we will be using infrastructure

mode, the SSID should be set here, for clarity we are setting this to the same as the access point name,

ensure it is in capital letters, as SSID’s are case sensitive. If incorrect case is used for the SSID on either

the AP or the WFT-E1A you will not be able to communicate between the two.

Set your country region and the channel frequency, and lastly set the data rate to “Best”. If this is not

available set it to 54Mbps as this is the fastest you can transmit in infrastructure mode. Click Apply.