Specifications

Authored by Simon Adams Product Support Specialist Canon UK RCC December 05
Revision 1.2 © Canon 2006
49
Now select the Wireless LAN settings tab.
In the SSID setting, you must enter the name of the SSID you set on your Access Point. Ensure the SSID
is in capital letters, as SSID’s are case sensitive. If incorrect case is used for the SSID on either the AP or
the WFT-E1A you will not be able to communicate between the two.
No encryption is used here for simplicities sake, however if you do input security keys, they must match
both in the Wireless Network Property Settings and the WFT-E1 exactly or communications will fail.
Finally save these settings to your CF card using a card reader / writer device connected to your PC,
ready to insert into the camera connected to the WFT-E1A