User manual

• The proﬁle list allows you to select any conﬁguration ﬁles that you

have already created on this system. If you would like to create a new

one, simply select ’Create New...’ and then enter the desired settings

in the right pane. To edit an existing proﬁle, simply select it and its

settings will be loaded into the dialog for editing.

• The send to card button will send the currently selected proﬁle to

a memory card loaded in the computer. After following the directions

provided by ITP, place the memory card into your camera and then

instruct it to load the settings. These conﬁguration ﬁles will work

with the Nikon WT-1/WT-1A and WT-2/WT-2A as well as the Canon

WFT-E1 transmitter.

• The conﬁgure WiPics button will upload the selected proﬁle right

into a WiPics transmitter that is connected to the computer running

ITP. This achieves the same goal as above, however it does not need

the memory card to load the settings into the unit.

• The import button allows you to load any existing conﬁguration ﬁles

generated by other programs into the proﬁle list above. Doing this

allows you to migrate your existing setup right into ITP without any

further steps.

• The copy button copies the selected proﬁle so that you can quickly

replicate your existing settings for additional cameras or other similar

networks.

• The remove button deletes the selected proﬁle from the list, allowing

you to remove proﬁles which are no longer useful for your work.

• The name ﬁeld allows you to assign a name to the proﬁle you are

creating/editing. If you are editing an existing proﬁle, changing this

ﬁeld will rename the existing proﬁle once you hit the save button.

• The save button commits the changes that you have made in the ﬁelds

below. When creating a new proﬁle, this will add the new proﬁle to

the list. When editing an existing one, this will commit the changes

that you have made to the settings. Note that the save process will

also initiate an audit of your settings to verify that the settings will

operate correctly.