User manual

Figure 3.3: The configure adapters dialog allows you to control which adapter(s)
ITP will automatically configure for usage with a wireless transmitter.
This selection effects a number of aspects of ITP’s setup, including the
addition of virtual IP Addresses to simplify setup.
3.4 Configuration
The configure server dialog allows you access to a number of advanced fea-
tures that do not fit into the categories covered above. This can be accessed
by right clicking on the ITP tray icon and selecting ’Configuration...’. The
settings provided in this dialog are as follows:
• The root folder field is the same as the ’storage location’ link in the
control centre interface. This field allows you to specify the location on
your machine where the home folders for each user will be placed. As
such, all images received by the server will be placed in this directory
or a folder contained within it.
• The port field allows you to select the TCP/IP port that the FTP
service will run on. This allows advanced users to run ITP on a non-
standard port in order to improve security and/or run multiple servers
on the same computer.
• Start server automatically determines whether the FTP service is
started as soon as ITP is launched. If left unchecked, the user will have
to manually start the FTP server from within ITP.
17