User manual

Figure C.1: When ITP is run for the first time, the Windows Firewall will prompt
you whether or not to grant it access. Select the unblock button to
allow the server to operate correctly.
C.3 Adding an Exception
In order to manually add an exception to allow ITP access to the FTP traffic,
please proceed to the control panel and select the security center. Once
the security center is opened, click the Windows Firewall link and select
the Exceptions tab. The dialog shown in figure C.2 will be shown, listing
the current programs and protocols that you have permitted access through
the firewall. Check the list of exceptions and see if ITP is on it - if it is, simply
make sure the box beside it is checked. If it is not on the list, click the Add
Program button and then select itp.exe from your ITP installation directory
(by default this is C:\Program Files\itp\itp.exe). Once ITP is added to the
list and checked, simply click the ok button and the exception will be made
through the firewall - if ITP is currently running, close and reopen it for the
change to take effect.
Once this exception is made, the firewall will now allow the incoming
FTP traffic to reach ITP and if everything else is configured correctly im-
ages should begin to move over the network. If you continue to experience
problems, double check your other settings and verify that everything is in
order.
62