user manual

14
Connection Wizard
Ad Hoc Connections
4
Select the channel and then press SET.
Available channels will be different for Ad Hoc
11b/g and 11a connections.
5
Select the Ad Hoc connection’s
encryption method and then press SET.
If you selected [WEP], continue with step 6 below.
If you selected [No encryption], skip to step 7.
Infrastructure Connections
4
Select the Wi-Fi network’s
authentication method and then press
SET.
If you selected [Shared Key], skip to step 6.
5
Select the Wi-Fi network’s encryption
method and then press SET.
If the authentication method is [Open], you can
select [WEP] and continue to step 6, or [No
encryption] and skip to step 7.
If the authentication method is [WPA-PSK] or
[WPA2-PSK], you can select [TKIP] or [AES].
6
Enter the encryption key as described
in the previous section (A 12).
Depending on the settings, you may need to select
the WEP index key first.
7
Continue with the procedure to
configure the IP address assignment
(A 15).
COPY