Specifications

WITE32 Release Notes Version 3.20
The Sweep Metric command Varies the bit field value and measures the metric selected on the
Metric tab. Displays the measurement results in a graphical form on
the Bit Field Sweep graph (see section 3.5.2.3).
The Run Default
Optimization command
Executes the default optimization sequence specified in the chip
driver (see section 3.5.2.4).
The Custom Optimization
command
Executes the custom optimization sequence configured on the
Optimization tab (see section 3.5.2.4).
The commands from the Script pull-down menu are applicable for the Scripting tab only (see section 3.5.2.7).
The menu includes the following commands:
The New command Creates a new script file.
The Open command Opens an existing script file.
The Save command Saves an existing script file.
The Save As command Saves an existing script file under a different file name.
The Print Script command Prints an existing script.
The Print Log command Prints the contents of the Script Output panel.
The Save Log to File
command
Saves the contents of the Script Output panel to a file.
The Clear Log Before
Running command
Check this command and the program will clear the contents of
the Output panel before executing the script file.
The Run Scripting command Executes the script.
The Stop Scripting command Terminates the script execution.
The Options pull-down menu includes the following commands:
The Adaptive Tracking
Graph command
Opens the Properties dialog box for the Adaptive Tracking graph.
The Bit Sweep Graph
command
Opens the Properties dialog box for of the Bit Sweep graph.
20 Guzik Technical Enterprises