Specifications

WITE32 Release Notes Version 3.20
The following items are on the Optimization tab:
The Custom Optimization
Sequence table
The table includes the following columns:
• The Block column displays the names of the optimization
blocks defined by the chip driver
• The Optimize column specifies whether the block will be
included in the optimization sequence or not. To include a
block in the optimization sequence, in the Optimize
column select the check box corresponding to the block.
• The Metric column displays the metric used as the block
optimization target. The metric is specified in the driver
and cannot be modified by the user.
• The Description column provides a commentary to the
corresponding block.
Note: A user can rearrange the order of the blocks for the custom
optimization by dragging-and-dropping a block name.
The Metric frame allows you to measure a metric. The frame contains the following items:
The metric selection
combo box
Select from the drop-down menu in this box, which metric to use
for the measurement.
The Result text box Displays the value of the metric measurement.
The Deviation text box Displays the deviation value of the metric measurement.
The Measure button Click this button to perform the measurement and display the
results in the Value and Deviation text boxes.
The Production Setup frame allows you to select the initial values for chip registers and choose an
optimization sequence. This setup affects the execution of the PRML chip optimization from the
WITE32 production test.
The frame contains the following items:
The Set Default Values
option
Select this option to load the default register values before the
optimization.
The Load From Data Base
option
Select this option to load the register values from the WITE32
Zone/Setup database before the optimization.
The Use Custom
Optimization option
Select this option to use the Custom Optimization Sequence,
configured in the Custom Optimization Sequence table described
above. In opposite case, the Default Optimization Sequence defined
in the chip driver is been used.
The Default button Click this button to load the default values of all bit fields defined
by the chip driver to the chip.
30 Guzik Technical Enterprises