Specifications

WITE32 Release Notes Version 3.20
4.9 Tests and Modules no Longer Supported in WITE32
1. The RCE32 module is discontinued and removed from the WITE32 version 3.20. Its functionality is
implemented in the newest PRML channel drivers (see sections 3.4 and 3.5). Please, contact Guzik
Technical Support for details.
2. The obsolete 747 Servo Track Profile Test is removed from the 747 Test module.
4.10 WITE32 Installation Procedure Modifications
The WITE32 installation is modified in the following way:
• The PRML chip drivers, the spinstand drivers and the Signal Display module are always installed in the
Typical or Custom mode. The corresponding PRML drivers, Device, and Signal Display options are
removed from the Select Components dialog.
• Two new modules – Perpendicular Parametric and Split tests are added to the WITE32 installation.
(See Sections 3.2) The corresponding PerpParam and WSPLIT options are added to the Select
Components dialog.
• A special precaution is made to avoid mixing up modules form different WITE32 revisions in the case
of partial WITE32 installation over the existing one. All modules included in the WITE32 installation
are always copied to the destination location. The Select Components dialog allows you to enter the
module licenses in the process of installation rather then to select the modules to be installed. The
dialog title and the prompt message are changed accordingly. They now read: Select Components for
Licensing and Select the components, for which you would like to specify the license.
• Following the new PRML channel software structure for the latest PRML chip drivers (see Section 3.4),
the Guzik Chip Adapter board driver, and the user interface module are included in the WITE32
installation.
Note: This is applicable to the three latest PRML drivers for the RC6600, and 88C7500P channels for Chip Adapter
2000, and the 88C7500M channel for Chip Adapter 4000.
56 Guzik Technical Enterprises