PUB.
Introduction Important Usage Instructions COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: DISCONNECT THE MAINS PLUG FROM THE SUPPLY SOCKET WHEN NOT IN USE. 2 Water and Moisture - Hazard of electric shock - Do not use this product near water or in rainy/moist situations.
Models ID0060: XA35 ID0065: XA30 3 Trademark Acknowledgements • • • • • • • • • • • • • • • • • • • SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. App Store, iPad, iPhone, iPod, iTunes and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
Highlights of the XA35 / XA30 The Canon XA35 / XA30 HD Camcorder is a high-performance camcorder whose compact size makes it ideal in a variety of situations. The following are just some of the many functions featured in the camcorder. 4 HD Recording Operability HD CMOS PRO sensor and DIGIC DV 4 image processor Emphasis on versatility The camcorder is equipped with a 1/2.84-type CMOS sensor that captures video at an effective pixel count of approximately 2.91 megapixels (2136x1362).
AVCHD/MP4 recording and dual recording When you record, you can choose between AVCHD and MP4 formats (A 39). You can also use dual recording (A 49) to record the same scene to both memory cards and even record on both memory cards using different formats. Dual recording is convenient, for example, to create a backup of your recording.
Enjoying your Recordings on Other Devices Connect the camcorder to an external monitor (A 110). Copy your recordings to an external video recorder (A 122). 6 Save your recordings (A 117). Enjoying Your Recordings Using the Camcorder's Wi-Fi Functions Use your iOS or Android device to remotely control the camcorder and view the image on its screen (A 128). Use the Web browser on your iOS or Android device to view the recordings on the camcorder (A 136).
Table of contents 1 Introduction 10 About this Manual 10 Conventions Used in this Manual 10 Supplied Accessories 12 Names of Parts 13 2 Preparations 20 Attaching the Ferrite Core 20 Charging the Battery Pack 20 Preparing the Camcorder 23 Attaching the Microphone Holder Unit 23 Attaching the Handle Unit 23 Using the Lens Hood and Lens Cap 24 Using the Viewfinder 24 Adjusting the OLED Screen 25 Grip Belt and Straps 26 Wireless Controller 27 Using a Tripod 28 Basic Operation of the Camcorder 29 Turning the C
Microphone Directionality (Built-in Microphone) 86 Switching the Input (MIC Terminal) 87 Microphone Attenuator (MIC Terminal) 87 Low Cut Filter (MIC Terminal) 88 Using Line Input or an External Microphone Connected to an INPUT Terminal 88 Recording Audio to Channel 2 (CH2) 88 Audio Recording Level (INPUT Terminals) 89 Adjusting the Microphone’s Sensitivity (INPUT terminals) 89 Activating the Microphone’s Attenuator (INPUT terminals) 90 Using Headphones 91 Color Bars/Audio Reference Signal 92 Recording Co
Wi-Fi Functions 124 Introduction to Wi-Fi 124 Remote Operation Via the Browser Remote Application 128 Setting the Camcorder's Password 128 Operating the Camcorder Remotely 128 Browser Remote Onscreen Controls and Displays 129 Remote Operation Using Browser Remote 131 Playback via Browser: Viewing Recordings Using a Web Browser on Your iOS or Android Device 134 Uploading Recordings Using an iOS Device 136 Playback on a Computer 138 Transferring Files to a Computer or FTP Server 139 Wi-Fi Connection Using a
About this Manual 1 Introduction Introduction About this Manual 10 Thank you for purchasing the Canon XA35 / XA30. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (A 160). Conventions Used in this Manual • IMPORTANT: Precautions related to the camcorder’s operation. • NOTES: Additional topics that complement the basic operating procedures.
About this Manual The three sets of icons indicate the operating mode and whether a function is available in that mode. : Indicates the movie format. For details, refer to Selecting the Movie Format (AVCHD/MP4) (A 39). : Indicates whether the camcorder is in shooting (CAMERA) or playback (MEDIA) mode. In this example, the function is available only in mode. For details, refer to Turning the Camcorder On and Off (A 29). : Indicates the shooting mode.
Supplied Accessories Supplied Accessories The following accessories are supplied with the camcorder: 12 CA-570 Compact Power Adapter (incl. power cord and ferrite core) BP-820 Battery Pack Microphone holder unit (incl. screws) Handle unit (incl. screws) WL-D89 Wireless Controller (incl.
Names of Parts Names of Parts Left side view 13 2 3 1 4 5 1 2 3 4 5 6 7 6 7 8 Lens barrier switch (A 40) Memory card slot 2 (A 37) Memory card slot 3 (A 37) u (review recording) button (A 46)/ Assignable button 5 (A 99) Lens hood (A 24) Focus/Zoom ring (A 55, 60) CUSTOM (customizable) dial (A 98) 9 8 10 11 CUSTOM (customizable) button (A 98) 9 INFRARED switch (A 96) 10 Double memory card slot cover 11 DISP. (onscreen display) button (A 95)/BATT.
Names of Parts Right side view 1 14 8 9 10 6 2 7 3 4 5 1 2 3 4 Built-in speaker (A 103) MIC terminal (A 83) HDMI OUT terminal (A 110, 111) REMOTE terminal For connecting commercially available remote controllers.
Names of Parts Front view 15 1 Back view 8 6 7 9 10 11 2 3 4 5 12 13 14 15 16 17 1 2 3 4 5 6 7 Instant AF sensor (A 57, 175) Remote sensor (A 27) Illumination sensor (A 154) AF/MF button (A 55)/ Assignable button 1 (A 99) PRE REC (pre-recording) button (A 94)/ Assignable button 2 (A 99) OLED touch screen (A 25, 30) Focus/Zoom ring switch (A 60) 8 9 10 11 12 13 14 15 16 17 Viewfinder (A 24) Dioptric adjustment lever (A 24) Joystick (A 31)/SET button (A 31) Strap mount (A 26) Assignable button 3
Names of Parts Top view 1 2 3 4 5 16 2 6 1 2 3 4 5 Built-in stereo microphone (A 81) Handle attachment unit (A 23) Mode switch (A 30) Zoom rocker (A 60) ACCESS indicator (A 40) 6 7 7 Power switch (A 29) POWER / CHG (battery charging) indicator (A 20)
Names of Parts Bottom view 17 1 2 3 4 1 2 3 4 Tripod socket (A 28) BATTERY RELEASE switch (A 21) Eye cup (A 24) Identification plate This plate bears the camcorder ID, which is written as "ID00XX" with "XX" representing a two-digit number. In addition, if "2.4 GHz only" is written, that indicates that Wi-Fi functions operate only in the 2.4 GHz band (A 127).
Names of Parts Handle unit 2 3 4 5 6 7 8 9 10 18 1 11 1 2 3 4 5 6 7 8 12 13 14 Microphone holder unit (A 81) Microphone lock screw (A 81) Accessory shoe Cold shoe for attaching accessories.
Names of Parts WL-D89 Wireless Controller 7 1 2 3 8 4 5 9 10 6 1 2 3 4 5 6 7 8 9 10 START/STOP button (A 40) G (mode selection) button (A 102) MENU button (A 33, 147) DISP.
Attaching the Ferrite Core 2 Preparations Preparations Attaching the Ferrite Core Attach the enclosed ferrite core before you connect the compact power adapter to the camcorder. 20 Attach the ferrite core to the cable about 6 cm from the plug end (the plug to be connected to the camcorder) of the compact power adapter cable. Pass the cable through the center of the core and wrap it around the core (as shown in the illustration), then close the unit until it clicks shut.
Charging the Battery Pack 5 Charging will start when the camcorder is turned off. POWER/CHG (battery charging) indicator • If the camcorder was on, the green POWER/CHG indicator will go out when you turn off the camcorder. After a moment, the POWER/CHG indicator will turn on in red (battery pack charging). The red POWER/CHG indicator will go out when the battery pack is fully charged. • If the indicator flashes, refer to Troubleshooting (A 162).
Charging the Battery Pack IMPORTANT 22 • Turn off the camcorder before connecting or disconnecting the compact power adapter. After you turn off the camcorder, important data is updated on the memory card. Be sure to wait until the green POWER/CHG indicator goes out. • When using the AC adapter, do not fix it permanently to one place as this may cause a malfunction.
Preparing the Camcorder Preparing the Camcorder This section covers the basic preparations for the camcorder such as attaching the handle unit and lens hood, and adjusting the viewfinder and OLED screen. When attaching the lens hood, grip belt and straps, be careful not to drop the camcorder by placing it on a table or other stable surface. Attaching the Microphone Holder Unit Use the supplied screws to attach the microphone holder unit to the handle unit.
Preparing the Camcorder Using the Lens Hood and Lens Cap 24 While recording, the supplied lens hood with lens barrier is effective for reducing stray light that can be the cause of lens flare and ghost images. Additionally, closing the lens barrier can help prevent fingerprints and dirt accumulation on the lens. Use the supplied lens cap when carrying the camcorder or storing it after use. * Note that the lens cap and the lens hood with lens barrier cannot be used simultaneously. 1 Remove the lens cap.
Preparing the Camcorder • If you wear glasses, you may find the viewfinder easier to use if you flip back the outer edge of the eye cup toward the camcorder body. 25 NOTES • Make sure you keep the eye cup attached when using the camcorder. • For details about how to take care of the viewfinder, refer to Handling Precautions (A 171), Cleaning (A 175). Adjusting the OLED Screen Open the OLED panel 90 degrees. • You can rotate the panel 90 degrees downward.
Preparing the Camcorder • About the OLED and viewfinder screens: The screens are produced using extremely highprecision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black dots. Misfired pixels in the viewfinder may appear instead as white dots. This has no effect on the recorded image and does not constitute a malfunction. 26 Grip Belt and Straps Fasten the grip belt.
Preparing the Camcorder Attaching an optional shoulder strap Pass the ends of the shoulder strap through the strap mount on the grip belt and adjust the length of the strap. 27 Wireless Controller First, insert the supplied CR2025 lithium button battery into the wireless controller. 1 Press the tab in the direction of the arrow and pull out the battery holder. 2 Place the lithium button battery with the + side facing up. 3 Insert the battery holder.
Preparing the Camcorder NOTES • When the camcorder cannot be operated with the wireless controller, or when it can only be operated at very close range, replace the battery. • The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight. 28 Using a Tripod You can mount the camcorder on a tripod but do not use tripods with mounting screws longer than 6.5 mm as this may cause damage to the camcorder.
Basic Operation of the Camcorder Basic Operation of the Camcorder Turning the Camcorder On and Off You can choose to turn the camcorder on in CAMERA ( ) mode for making recordings or MEDIA ( ) mode for playing back recordings. Select the mode using the power switch. 29 To turn on the camcorder Set the power switch to CAMERA for MEDIA for mode (A 102). mode To turn off the camcorder Set the power switch to OFF.
Basic Operation of the Camcorder Setting the Shooting Mode In mode, you can change the shooting mode to match your shooting style. 30 (Auto) mode Set the mode switch to N. With this mode, the camcorder takes care of all the settings while you concentrate on recording (A 41). This operating mode is suitable if you just prefer not to bother with detailed camcorder settings. (Manual) mode Set the mode switch to n. With this mode, you can enjoy full access to menus, settings and advanced functions (A 45).
Basic Operation of the Camcorder Drag Swipe your finger up and down or left and right across the screen. Used to scroll menus, to browse through index screen pages or to adjust slider controls like the volume. On some screens, you can achieve the same effect by touching the triangle control buttons. 31 IMPORTANT • The camcorder features a capacitive touch screen. In the following cases, you may not be able to perform touch operations correctly.
Basic Operation of the Camcorder Using the Menus Many of the camcorder’s functions can be adjusted from the FUNC. panel and the setup menus. For details about the available menu options and settings, refer to the appendix Menu Options Lists (A 146). FUNC. Panel 32 In mode: Operating modes: There are three ways to access the FUNC. panel: by touching [FUNC.] on the OLED screen, by pressing F or by pushing the joystick (Ý/Þ) to select [FUNC.] and then pressing S. After the FUNC.
Basic Operation of the Camcorder Setup Menus In this manual, navigating the setup menus is explained using the touch panel controls but they can also be navigated using the joystick and other buttons. The procedure below explains how to use both methods. If necessary, refer back to this section for details on using the joystick. Operating modes: To use touch panel controls 1 mode only: Touch [FUNC.]. 2 Touch [MENU]. 3 Touch the tab of the desired menu.
First Time Settings First Time Settings Setting the Date and Time You will need to set the date and time of the camcorder before you can start using it. The [Date/Time] screen will appear automatically when the camcorder’s clock is not set. 34 Operating modes: 1 Use the power switch to turn on the camcorder. • The [Date/Time] screen will appear. 2 Touch a field you want to change (year, month, day, hours or minutes). • You can also push the joystick (ÏÐ) to move between the fields.
First Time Settings 2 Touch the desired language and then touch [OK]. 3 Touch [X] to close the menu. NOTES • Some control buttons, such as [ZOOM], [FUNC.] and [MENU], will appear in English regardless of the language selected. Changing the Time Zone Change the time zone to match your location. The default setting is Paris. In addition, the camcorder is able to retain the date and time of an additional location.
Using a Memory Card Using a Memory Card Memory Cards Compatible for Use with the Camcorder (as of November 2015) 36 You can use the following types of commercially available Secure Digital (SD) cards with this camcorder. The movie recording function has been tested using SD/SDHC/SDXC memory cards made by Panasonic, Toshiba and SanDisk. For the latest information on cards that can be used, visit your local Canon Web site. Memory card type: .
Using a Memory Card Inserting and Removing a Memory Card Make sure to initialize (A 37) all memory cards before using them with this camcorder. 1 Turn off the camcorder. • Make sure the POWER/CHG indicator is off. 2 Open the double memory card slot cover. 3 Insert the memory card straight, with the label facing the front of the camcorder, all the way into one of the memory card slots until it clicks. • You can also use two memory cards, one in each memory card slot.
Using a Memory Card 2 Open the initialization screen for the desired memory card. [FUNC.] > [MENU] > > [Initialize ] > [6 Mem. Card A] or [7 Mem. Card B] > [Initialize] • Touching [FUNC.] is necessary only when performing the procedure in mode. • In the initialization screen, touch [Complete Initialization] to physically erase all the data rather than just clear the file allocation table of the memory card. 38 3 Touch [Yes].
Selecting the Movie Format (AVCHD/MP4) Selecting the Movie Format (AVCHD/MP4) You can choose to record movies in AVCHD or MP4 format. AVCHD movies are ideal for playback with fantastic picture quality. MP4 movies are versatile and can easily be played back on smartphones and tablets or uploaded to the Web. Operating modes: 1 Open the [Movie Format] screen. [FUNC.] > [MENU] > > [Movie Format] 2 Select the desired movie format. 3 Touch [X].
Recording Movies and Photos 3 Recording Recording Recording Movies and Photos 40 You can select the memory card that will be used to record movies and photos (A 38). For details on recording audio, refer to Recording Audio (A 81). Should the camcorder fail to operate correctly, refer to Troubleshooting (A 160). POINTS TO CHECK • Before you begin recording, make a test recording first to check that the camcorder is operating correctly.
Recording Movies and Photos Recording in AUTO Mode When you use mode to shoot video and take photos, the camcorder will automatically adjust various settings for you. Operating modes: 1 Set the mode switch to N. 2 Set the power switch to CAMERA. 41 To record video Press Y to begin recording. • During recording, Ü will appear on the screen. Additionally, if the handle unit is attached to the camcorder, the tally lamp will illuminate.
Recording Movies and Photos Smart AUTO In mode, the camcorder will automatically detect certain characteristics of the subject, background, lighting conditions, etc. It will then adjust various settings (focus, exposure, color, image stabilization, image quality, among others), selecting the best settings for the scene you want to shoot. The Smart AUTO icon will change to one of the icons in the following table.
Recording Movies and Photos Intelligent IS Intelligent IS allows the camcorder to select the best image stabilization option based on your shooting method. The Intelligent IS icon will change to one of the following icons. In and modes, you can set the image stabilization mode manually (A 65).
Recording Movies and Photos 44 • Under certain conditions, the Smart AUTO icon that appears on the screen may not match the actual scene. Especially when shooting against orange or blue backgrounds, the sunset or one of the blue skies icons may appear and the colors may not look natural. In such case, we recommend recording in mode (A 45). • Photos are recorded as JPG files. During and modes, the camcorder can take photos during record standby mode or capture photos from a movie during playback (A 105).
Recording Movies and Photos Recording in n (Manual) Mode When the mode switch is set to n (Manual), you can enjoy full access to the menus and manually adjust the exposure, focus, white balance and many more of the camcorder’s settings to your preference. Even in mode, though, the camcorder can help you with the settings, for example, by using Special Scene recording programs (A 74). Operating modes: 45 1 Set the mode switch to n. 2 Set the power switch to CAMERA. 3 Record movies and photos.
Recording Movies and Photos 46 • When the camcorder switches form recording on one memory card to another during relay recording, the video will be recorded as two separate relay scenes. With the supplied software, Data Import Utility, you can join relay scenes recorded on both memory cards as a single scene and save it on a computer (A 117). • For scenes with a long recording time, the video (stream) file in a scene will be split approximately every 4 GB. Even in such case, playback will be continuous.
Selecting the Recording Mode (Video Quality) Selecting the Recording Mode (Video Quality) The camcorder offers various recording modes, depending on whether the movie format is AVCHD or MP4. When you record an MP4 movie with a recording mode of 3 Mbps, you can upload it to an FTP server and begin editing right away. In addition, for AVCHD movies, when the recording mode is set to 28 Mbps LPCM (50.00P) or 24 Mbps LPCM, you can enjoy two-channel linear PCM audio recording with a sampling frequency of 48 kHz.
Selecting the Recording Mode (Video Quality) Recording modes by movie format Movie format AVCHD Recording mode Resolution Audio format 28 Mbps LPCM (50.00P) Linear PCM 28 Mbps (50.00P) Dolby Digital 24 Mbps LPCM 1920x1080 Linear PCM 24 Mbps 48 17 Mbps Dolby Digital 5 Mbps 1440x1080 35 Mbps (50.00P) 24 Mbps MP4 1920x1080 17 Mbps AAC 4 Mbps 1280x720 3 Mbps 640x360 Approximate recording times Default value For AVCHD movies: Recording mode → Memory card ↓ 28 Mbps LPCM (50.
Dual Recording and Relay Recording Dual Recording and Relay Recording When you record, you can use dual recording to record simultaneously on both memory cards so that you can use one of the movies as a backup. Alternatively, you can use relay recording so that if the memory card being recorded on becomes full, the recording will continue uninterrupted on the other memory card. Activating dual recording The backup movie is recorded on memory card 3.
Selecting the Frame Rate Selecting the Frame Rate You can change the frame rate (the number of frames recorded per second) of AVCHD movies to change the look of your movies. When the recording mode is set to 28 Mbps LPCM (50.00P) or 28 Mbps (50.00P) for AVCHD movies or 35 Mbps (50.00P) for MP4 movies, the frame rate will automatically be set to 50.00P so you will not be able to select the frame rate.
Slow & Fast Motion Recording Slow & Fast Motion Recording When the movie format is set to MP4, you can record scenes that have a slow motion or fast motion effect during playback. You simply select the slow motion or fast motion rate you are trying to achieve (x0.5 to x1200 the normal speed) and then record. Sound is not recorded for such scenes. Operating modes: 51 1 Open the [Slow & Fast Motion] screen. [FUNC.] > [MENU] > > [Slow & Fast Motion] 2 Select the desired rate.
Slow & Fast Motion Recording • The amount of video that can be recorded at one time is approximately 12 hours' worth of video at normal playback speed. When that amount is exceeded, the camcorder will automatically stop recording. However, when you use slow & fast motion recording, the recording time will change. For example, when [x0.5] is selected, the recording time will be 6 hours (playback time will be 12 hours).
CINEMA Mode and Cinema-Look Filters CINEMA Mode and Cinema-Look Filters In mode, you can use a variety of professional cinema-look filters to create unique movies with a distinctive appearance. You can also use cinema-look filters when you convert movies to MP4 (A 121). Operating modes: 1 Set the mode switch to E. 2 Touch [FILTER 1] to open the cinema-look filter selection screen. 3 Drag your finger up and down along the photos to select the desired cinema-look filter and then touch [OK].
CINEMA Mode and Cinema-Look Filters Options ( Default value) The camcorder offers the following cinema-look filters. Select the desired filter while previewing the effect on the screen. 54 [1. Cinema Standard] [2. Vivid] [3. Dream] [4. Cool] [5. Sepia] [6. Old Movies] [7. Memory] !Filter number (will appear on the control button) and name "Preview the effect on the screen #Select the effect level $Brief description (onscreen guidance) NOTES • During mode, the following functions are not available.
Focus Adjustment Focus Adjustment You can adjust the focus manually and use the peaking function to assist you or you can let the camcorder focus for you by using autofocus. With autofocus, you can set the autofocus speed. The camcorder also features face detection & tracking. POINTS TO CHECK 55 • Adjust the zoom before you start the procedure. Manual Focus Use the focus/zoom ring to focus manually. You can also use peaking to help you focus more accurately.
Focus Adjustment [FUNC.] > [< Focus] 2 Touch [D]. 3 Use Touch AF or turn the focus/zoom ring to obtain the desired focus position. 4 Touch [SET] to set the preset focus position. 56 5 After adjusting the focus, touch [ON] to return to the preset focus position. • Touch [SET] again to cancel the current preset focus position. • [ON] will be grayed out while adjusting the focus or zoom.
Focus Adjustment Autofocus When autofocus is activated, the camcorder continuously adjusts the focus on the subject in the center of the screen. The focusing range is 1 cm (at full wide-angle, measured from the front of the lens barrel) to G and 60 cm (throughout the zoom range, measured from the front of the lens barrel) to G. Perform the following procedure to set the autofocus speed. Operating modes: 1 and modes only: Press B. 2 Open the [AF Mode] screen. [FUNC.
Focus Adjustment 58 • While using autofocus, you can turn the focus/zoom ring to focus manually. When you stop turning the ring, the camcorder returns to autofocus. This is useful in situations such as when focusing on a subject on the other side of a window. • When the recording program is set to [Š Fireworks], the focus will be set to G and cannot be changed. • Autofocus may not work well on the following subjects or in the following cases. In such case, focus manually.
Focus Adjustment Limiting Autofocus to Faces While using autofocus, you can limit the autofocus function only to cases when a subject’s face is detected and use manual focus for all other scenes. The camcorder will also adjust the brightness when focusing automatically on the subject’s face. Set an assignable button to [~ Face Only AF] (A 99) and press the button. • ~ appears on the screen. NOTES • The camcorder may mistakenly detect the faces of non-human subjects.
Zooming Zooming Operating modes: 60 To zoom in and out, you can use the focus/zoom ring, the zoom rockers on the camcorder and handle unit, the zoom buttons on the wireless controller or the zoom controls on the touch screen. In addition to the 20x optical zoom, in mode, you can turn on the digital zoom* (400x) with the p > [Digital Zoom] setting. This camcorder also features a digital tele-converter, which allows you to enlarge the image on the screen digitally.
Zooming Using the Zoom Rockers or Wireless Controller Move the zoom rocker on the camcorder or handle unit toward T (wide angle) to zoom out. Move it toward S (telephoto) to zoom in. • You can also use the zoom buttons on the wireless controller. • By default, the camcorder’s zoom rocker (the rocker near the grip belt) operates at a variable speed – press gently for a slow zoom; press harder for faster zooms.
Zooming NOTES • When [High-Speed Zoom] is set to [i On] and [Zoom Rocker Zoom Speed] is set to [Y], [Zoom Speed Level] during record standby mode will automatically be set to [Z Fast]. Also, when pre-recording is activated during record standby mode, the zoom speed will be determined by the [Zoom Speed Level] setting. 62 To use high-speed zoom During record standby mode, you can use high-speed zoom when [Zoom Speed Level] is set to [Z Fast].
Zooming To set the zoom speed of the wireless controller For the wireless controller, first set the overall zoom speed to one of three levels. The wireless controller operates at a constant speed that you can select. Refer to the following table for a summary of the zoom speed. 1 Open the [Zoom Speed Level] screen. [FUNC.] > [MENU] > p > [Zoom Speed Level] 2 Touch [Z Fast], [[ Normal] or [] Slow] and then touch [K].
Zooming Soft Zoom Control Soft zoom control allows you to start and/or stop the zoom gradually. 1 Open the [Soft Zoom Control] screen. [FUNC.] > [MENU] > p > [Soft Zoom Control] 2 Touch the desired option and then touch [X]. 64 Options ( Default value) [j Off] Use this setting if you do not intend to use soft zoom control. [¬ Start] Zoom starts gradually. [® Stop] Zoom stops gradually. [¯ Start & Stop] Zoom start and stops gradually.
Advanced Image Stabilization Advanced Image Stabilization The image stabilizer reduces camcorder blur (blur due to the camcorder moving) so you can get nice, stable shots. Select the image stabilization mode according to the shooting conditions. Operating modes: 1 Open the [Image Stabilizer] screen. [FUNC.] > [Image Stabilizer] 2 Touch the desired IS mode and then touch [X].
Automatic Gain Control (AGC) Limit Automatic Gain Control (AGC) Limit When recording in dark surroundings, the camcorder will automatically increase the gain to try to get a brighter picture. However, using higher gain values may result in more noticeable video noise. You can select the AGC limit to curb the amount of noise by setting the maximum gain value to be used. The smaller the AGC limit, the darker the picture but the less noise it will contain.
Automatic Exposure Recording Programs Automatic Exposure Recording Programs With the automatic exposure (AE) recording programs, the camcorder will adjust the shutter speed and/or aperture value to obtain the optimal exposure. When using the AE recording programs, you can change functions like the white balance and image effects. Operating modes: 1 Open the screen of the desired recording program. 67 [FUNC.] > [Rec. Programs] > [‚ Shutter-Pri. AE] or [“ Aperture-Pri.
Automatic Exposure Recording Programs NOTES 68 • [‚ Shutter-Pri. AE]: - On screen only the denominator is displayed – [‚ 250] indicates a shutter speed of 1/250 second, etc. - When recording in dark surroundings, you can obtain a brighter picture by using slow shutter speeds; however, image quality may not be as good and autofocus may not work well. - The image may flicker when recording with fast shutter speeds. • [“ Aperture-Pri.
Exposure Adjustment Exposure Adjustment At times, backlit subjects may appear too dark (underexposed) or subjects under very strong lights may appear too bright or glaring (overexposed). In such cases, adjusting the exposure will correct this. This camcorder features a dedicated recording program, [n Manual Exposure], for adjusting the exposure manually. However, you can also compensate the exposure when using other recording programs.
Exposure Adjustment 1 From the exposure adjustment screen, touch [w] to select the zebra level. 2 Touch [70%] or [100%] and then touch [K]. 3 Touch [z] or [{] and then touch [X]. • The zebra pattern will appear on the overexposed areas of the picture. • Touch again to turn off the zebra pattern. 70 NOTES • Using the zebra pattern will not affect your recordings. Exposure Compensation When you use a recording program other than [n Manual Exposure], the camcorder will adjust the exposure automatically.
Exposure Adjustment To adjust the Touch AE function for highlights (Highlight AE) Certain subjects, like clouds or white objects, are easily overexposed and can end up appearing as bright areas where all detail is lost. Using the [Highlights] setting, you can touch the brightest area inside the y frame and the camcorder will automatically make corrections so that area is not overexposed.
White Balance White Balance The white balance function helps you to accurately reproduce colors under different lighting conditions. Operating modes: 72 POINTS TO CHECK • Select a recording program other than the Special Scene recording programs. 1 Open the white balance screen. [FUNC.] > [Ä White Balance] 2 Touch the desired option and then touch [X].
White Balance • Using a custom white balance may provide better results in the following cases: - Changing lighting conditions - Close-ups - Subjects in a single color (sky, sea or forest) - Under mercury lamps, certain types of fluorescent lights and LED lights • Depending on the type of fluorescent light, optimal color balance may not be obtained with [¿ Fluorescent] or [À Fluorescent H]. If the color looks unnatural, select [Ã Automatic] or a custom white balance setting.
Special Scene Recording Programs Special Scene Recording Programs Recording in a very bright ski resort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting a Special Scene recording program. Operating modes: 1 Open the recording programs screen. 74 [FUNC.] > [Rec. Programs] > [ú Portrait] 2 Touch the desired recording program and then touch [X].
Special Scene Recording Programs [œSpotlight] [ŠFireworks] To record spotlit scenes. To record fireworks. 75 NOTES • [ú Portrait]/[û Sports]/[ý Snow]/[L Beach]: The picture may not appear smooth during playback. • [ú Portrait]: The blur effect of the background increases the more you zoom in (S). • [ý Snow]/[L Beach]: The subject may become overexposed on cloudy days or in shaded places. Check the image on the screen. • [Œ Low Light]: - Moving subjects may leave a trailing afterimage.
Looks and Other Image Effects Looks and Other Image Effects You have the option of adding a "look" to your recordings. A look is a combination of various picture settings that can enhance the recording's visual quality. You can also adjust various aspects of the picture, such as the color depth and sharpness. Operating modes: 76 POINTS TO CHECK • Select a recording program other than the Special Scene recording programs.
Looks and Other Image Effects NOTES • Image effects are not available during infrared mode. • When [y Exposure] is set to [n], the [Brightness] parameter is not available. • When the [Image Effects] > [Looks] setting is set to [Wide DR] or [Highlight Priority], the [Contrast] parameter is not available. • When the [Image Effects] > [Looks] setting is set to [Highlight Priority], you can use the q > [ View Assistance] setting to display the picture on the screen with more accurate colors.
Setting the Time Code Setting the Time Code The camcorder can generate a time code signal and embed it in your recordings. In addition, the time code will appear in the recordings output from the HD/SD-SDI terminal ( only) and HDMI terminal. You can select whether the time code is output from the HDMI terminal (A 155). Operating modes: 78 Selecting the Running Mode You can select the running mode of the camcorder’s time code. 1 Open the [Time Code Mode] screen. [FUNC.
Setting the Time Code NOTES • When you are using pre-recording mode, [Free Run] is automatically set and cannot be changed. • As long as the built-in rechargeable lithium battery is charged and you selected the [Free Run] option, the time code continues to run even if you disconnect all other power sources. However, this is less accurate than when the camcorder is on.
Setting the User Bit Setting the User Bit The user bit display can be selected from the date or the time of recording, or an identification code consisting of 8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the letters A to F. When you record a scene, the user bit will be recorded with it. The user bit is also output from the HD/SD-SDI terminal ( only) or HDMI terminal. Operating modes: 80 1 Open the user bit [Setting] screen. [FUNC.
Recording Audio Recording Audio You can record audio using the built-in stereo microphone, commercially available external microphone (INPUT 1/INPUT 2 terminals*, MIC terminal) or line input (INPUT 1/INPUT 2 terminals*). Using the INPUT 1/INPUT 2 terminals, you can select the audio input independently for channel 1 (CH1) and channel 2 (CH2). When you are recording AVCHD movies and the recording mode is set to 28 Mbps LPCM (50.
Recording Audio Connecting an External Microphone or External Audio Input Source to the Camcorder In order to use the microphone holder and INPUT 1/INPUT 2 terminals, the handle unit must be attached to the camcorder. Follow the procedure below to attach a microphone (refer also to the following illustration). To connect an external device to the camcorder, plug the device’s cable into the desired terminal (햵).
Recording Audio Using the WM-V1 Wireless Microphone Using the optional WM-V1 Wireless Microphone, you can reliably record sound even when recording subjects at a distance exceeding the practical range of the built-in microphone. For details about using the WM-V1, refer to the instruction manual supplied with the microphone. 83 Audio Scenes and Other Audio Settings You can have the camcorder optimize the audio settings of the built-in microphone by selecting the audio scene that matches your surroundings.
Recording Audio Settings for each audio scene 84 [Built-in Mic Freq. Response] [Built-in Mic Directionality] [h Normal] [h Normal] [ê Boost HF+LF Range] [î Wide] [H Auto (High)] [é Boost MF Range] [í Monaural] [k Automatic] [H Auto (High)] [è Low Cut Filter] [î Wide] [n] (manual): 70 [k Automatic] [H Auto (High)] [è Low Cut Filter] [í Monaural] (A 84) (A 85) (A 86) (A 86) [ä Mic Level] [Built-in Mic Att.
Recording Audio To display the audio level indicator Usually, the audio level indicator will be displayed only after activating the manual adjustment of the audio recording level. You can choose to display it also when the audio level is adjusted automatically. 1 Open the automatic audio recording level screen. [FUNC.] > [ä Mic Level] > [m] (automatic) 2 Touch [Audio Level Indicator] and then touch [X]. 85 NOTES • When the audio level meter reaches the red point (0 dB), the sound may be distorted.
Recording Audio POINTS TO CHECK • Set [— Audio Scene] to [„ Custom Setting] (A 83). 1 Open the [Built-in Mic Att.] screen. [FUNC.] > [MENU] > p > [Built-in Mic Att.] 2 Touch the desired option and then touch [X]. 86 Options ( Default value) [2 Automatic] The camcorder will automatically activate the built-in microphone attenuator as necessary for optimal audio recording levels so high audio levels will not be distorted.
Recording Audio POINTS TO CHECK • Set [— Audio Scene] to [„ Custom Setting] (A 83). 1 Open the [Built-in Mic Directionality] screen. [FUNC.] > [MENU] > p > [Built-in Mic Directionality] 2 Touch the desired option and then touch [X]. Options ( Default value) [í Monaural] Mono recording that emphasizes sound coming from the front of the camcorder/ microphone. [h Normal] Standard stereo recording; a middle point between the [î Wide] and [í Monaural] settings in reach.
Recording Audio Low Cut Filter (MIC Terminal) When you are recording using a microphone connected to the MIC terminal, you can activate the low cut filter to reduce the sound of blowing wind, a car’s engine and similar ambient sounds. Operating modes: 1 Open the [MIC Low Cut] screen. [FUNC.] > [MENU] > p > [MIC Low Cut] 88 2 Touch [i On] and then touch [X].
Recording Audio NOTES • Even if you select [ INPUT 1], the audio recording level will be determined by the audio level switch and dial for INPUT 2. • If you select [ Built-in Mic/MIC], the camcorder will record monaural sound. In such case, [— Audio Scene] will be set to [‘ Standard]. Audio Recording Level (INPUT Terminals) You can set the audio recording level for audio input to automatic or manual independently for each channel.
Recording Audio 1 Open the desired INPUT terminal’s sensitivity submenu. [FUNC.] > [MENU] > p > [INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming] 2 Touch the desired level and then touch [X]. • The available sensitivity levels are +12 dB, +6 dB, 0 dB, -6 dB and -12 dB.
Using Headphones Using Headphones Use headphones for playback or to check the audio level while recording. The following procedure explains how to adjust the volume. Operating modes: 91 1 Open the [Headphone Volume] screen. [FUNC.] > [MENU] > q > [Headphone Volume] • Touching [FUNC.] is necessary only when performing the procedure in mode. 2 Touch [Ô] or [Õ] to adjust the volume and then touch [X]. • You can also drag your finger along the volume bar.
Color Bars/Audio Reference Signal Color Bars/Audio Reference Signal You can have the camcorder output and record color bars and a 1 kHz audio reference signal and output them from the HDMI OUT terminal, AV OUT terminal, HD/SD-SDI terminal ( only) and × (headphone) terminal (audio reference signal only). Operating modes: 92 Recording Color Bars You can choose between EBU color bars and SMPTE standard-definition color bars. 1 Open the [Color Bars] menu. [FUNC.
Video Snapshot Video Snapshot Record a series of short scenes. To record a video snapshot scene, set an assignable button to [¦ Video Snapshot] in advance. Operating modes: 1 Set an assignable button to [¦ Video Snapshot] (A 99). 2 Press the assignable button to activate video snapshot mode. • D (the default length of a video snapshot scene) appears on the screen. • Press the button again to deactivate video snapshot mode. 3 Press Y.
Pre-Recording Pre-Recording The camcorder will start recording 3 seconds before you press Y, ensuring you do not miss important shooting opportunities. This is especially useful when it is difficult to predict when to start recording. By default, the pre-recording function is assigned to assignable button 2. Operating modes: 94 1 Press . • z will appear on the screen. • Press again to turn off pre-recording. 2 Press Y. • The scene recorded on the memory card will start 3 seconds before Y was pressed.
Onscreen Displays and Data Code Onscreen Displays and Data Code You can turn most onscreen displays on or off. Operating modes: Repeatedly press D to turn the onscreen displays on/off in the following sequence: mode: • All displays on • Onscreen markers1 • Displays off mode2: • Only data code on • All displays on 1 2 The onscreen markers will be displayed only when p > [Onscreen Markers] is set to an option other than [j Off]. Pressing D has the same effect as touching the screen.
Infrared Recording Infrared Recording This camcorder features the ability to shoot movies in dark surroundings using the camcorder's infrared light and other sources of infrared light. Also, you can select whether the lighter areas of the picture appear in green or white. To use the infrared light, set an assignable button to [< IR Light] or use the menu, as described below. Make sure you attach the handle unit to the camcorder in advance.
Using the GP-E2 GPS Receiver Using the GP-E2 GPS Receiver When you attach the optional GP-E2 GPS Receiver to the camcorder, you can acquire GPS information and add it to your movies and photos. For details about how to attach and use the receiver, refer also to the receiver's instruction manual. Operating modes: 97 When connecting the GP-E2 GPS Receiver to the camcorder, use the connecting cable supplied with the receiver.
CUSTOM Dial and Button 4 Customization Customization CUSTOM Dial and Button 98 You can assign to C and the CUSTOM dial one of several frequently used functions. You can then adjust the selected function using C and the CUSTOM dial, without having to access the menu. Operating modes: 1 Open the [CUSTOM Dial & Button] screen. [FUNC.] > [MENU] > q > [CUSTOM Dial & Button] 2 Touch the desired option and then touch [X].
Assignable Buttons Assignable Buttons The camcorder conveniently features 5 buttons to which you can assign various functions. By assigning often used functions, you can quickly access them with a single press of a button. Operating modes: 99 Changing the Assigned Function 1 Open the selection screen for the desired assignable button. [FUNC.] > [MENU] > q > Select from [Assign Button 1] to [Assign Button 5] 2 Select the desired option and then touch [X].
Assignable Buttons [ [ [ [ AGC Limit]* Functions the same as selecting [x AGC Limit] (A 66) in the FUNC. panel. Focus]* Functions the same as selecting [< Focus] (A 55) in the FUNC. panel. Exposure]* Functions the same as selecting [y Exposure] (A 69) in the FUNC. panel. Audio Scene] Functions the same as selecting [— Audio Scene] (A 83) in the FUNC. panel. 100 [ [ [ Mic Level]* Functions the same as selecting [ä Mic Level] (A 84) in the FUNC. panel.
Saving and Loading Menu Settings Saving and Loading Menu Settings After you adjust the cinema-look filters and other settings in the FUNC. panel and setup menus, you can save those settings on a memory card. You can load those settings at a later date or on another XA35 or XA30 camcorder so that you can use that camcorder in the same way. Operating modes: 101 Saving Menu Settings to a Memory Card Menu settings must be saved to memory card 3.
Playing Back Video 5 Playback Playback Playing Back Video This section explains how to play back scenes. For details on playing back scenes using an external monitor, refer to Connecting to an External Monitor (A 110). 102 Operating modes: 1 Set the power switch to MEDIA. • The AVCHD movie index screen will appear. 2 If necessary, change the index screen. [6 ¸] > Tab of the desired memory card (6 or 7) > Control button of the content you want to play back ([y· Movies] or [y¸ Movies]).
Playing Back Video • Touch the screen to display the playback controls. During playback, the playback controls will disappear automatically after a few seconds without operation. In playback pause, touch the screen again to hide the playback controls.
Playing Back Video During playback pause: 104 ! Resume playback. " Slow playback* backward/forward. # Capture the displayed frame as a photo (A 105). * Touch several times to increase the playback speed 1/8 → 1/4 the normal speed. Displaying scene information 1 In either the AVCHD or MP4 movie index screen, touch [I]. 2 Touch the desired scene. • The scene information screen appears. • If the optional GP-E2 Receiver was attached to the camcorder during recording, GPS information will also appear.
Playing Back Video Capturing Photos During Movie Playback You can capture a photo while a movie is being played back. 1 2 3 4 Play back the scene from which you want to capture the photo. Pause the playback at the point where you want to capture the photo. Touch [PHOTO]. Touch [Ñ] to stop the playback. • • • • The size of the captured photos will be 1920x1080. The date of the photos will reflect the date and time of recording of the original scene.
Deleting Scenes Deleting Scenes You can delete those scenes that you are not interested in keeping. Deleting scenes allows you also to free up space on the memory card. Operating modes: 106 Deleting a Single Scene 1 Play back the scene you wish to delete (A 102). 2 Touch the screen to display the playback controls. 3 Open the [Delete] screen. [Ý] > [FUNC.] > [Delete] 4 Touch [Yes]. • The scene is deleted. 5 Touch [OK]. Deleting Scenes from the Index Screen 1 Open the index screen (A 102).
Deleting Scenes 2 After selecting all the desired scenes, touch [OK]. Options [date/folder name] Delete all the scenes recorded on a particular date. For AVCHD movies, the date will appear in the control button. For MP4 movies, the folder name (A 103) will appear, with the last four digits indicating the month and day. [Select] Select individual scenes to delete. [All Scenes] Delete all the scenes. IMPORTANT • Be careful when deleting recordings. Once deleted, scenes cannot be recovered.
Dividing Scenes Dividing Scenes You can divide AVCHD scenes in order to leave out the best parts and later cut out the rest. Operating modes: 108 1 Play back the desired scene (A 102). 2 Pause the playback at the point where you want to divide the scene. 3 Open the screen for dividing scenes. [FUNC.] > [Divide] 4 Bring the scene to a precise point, if necessary. • The point at which the movie will be divided is indicated by the marker. • Playback controls will appear on the screen (A 104).
Trimming Scenes Trimming Scenes You can trim MP4 scenes by removing everything up to a certain point or everything after a certain point. Operating modes: 1 Play back the desired scene (A 102). 2 Pause the playback. 3 Open the screen for trimming scenes. [Edit] > [Trim] 4 Bring the scene to a precise point, if necessary. • The point at which the movie will be trimmed is indicated by the marker. • Playback controls will appear on the screen (A 104).
Connecting to an External Monitor 6 External Connections External Connections Connecting to an External Monitor 110 When you connect the camcorder to an external monitor for recording or playback, use the terminal on the camcorder that matches the one you wish to use on the monitor. Then, select the video signal output configuration. The camcorder will automatically switch between the AV OUT and HDMI OUT terminals based on the external connection.
Connecting to an External Monitor Selecting the Terminal Used For Output To output your recordings on an external monitor, you must first select which terminal you will use. 1 Open the [Output Terminal] screen. [FUNC.] > [MENU] > q > [Output Terminal] • Touching [FUNC.] is necessary only when performing the procedure in mode. 2 Touch the desired option and then touch [X]. • If you selected [ HD/SD-SDI], [ HD/SD-SDI & HDMI] or [ relevant procedure below to configure the output signal.
Connecting to an External Monitor 112 • The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an HDMI output terminal on an external device, as this may damage the camcorder. • There will be no video output from the AV OUT terminal while an external monitor is connected to the HDMI OUT terminal. • Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors. • Video may not be output correctly depending on the monitor. In such case, use another terminal.
Audio Output Audio Output The camcorder can output audio from the HD/SD-SDI terminal ( only), HDMI OUT terminal, AV OUT terminal or × (headphone) terminal. When audio is output from the AV OUT terminal or × (headphone) terminal, you can configure the following settings.
Viewing Photos 7 Photos Photos Viewing Photos Operating modes: 114 1 Set the power switch to MEDIA. • The AVCHD movie index screen will appear. 2 Open the photo index screen. [6 ·] > Tab of the desired memory card (6 or 7) > [} Photos] 3 Look for the photo you want to play back. ! Index screen button. Displays the currently selected memory card. Press to change the index screen. " Drag your finger left/right for the next/previous index page*. # Display the next/previous index page.
Viewing Photos Photo Jump Function When you have recorded a large number of photos, you can jump easily through the photos using the scroll bar. 1 Touch the screen to display the playback controls. 2 Touch [h]. 3 Drag your finger left and right along the scroll bar and then touch [K]. 115 IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the double memory card slot cover.
Deleting Photos Deleting Photos You can delete those photos that you are not interested in keeping. Operating modes: Deleting a Single Photo 116 1 In single photo view, select the photo you want to delete. 2 Touch the screen to display the playback controls. 3 Open the [Delete] screen. [FUNC.] > [Delete] 4 Touch [ Proceed] and then touch [Yes]. • The photo is deleted. 5 Drag your finger left/right to select another photo to delete or touch [X].
8 Saving/Sharing Recordings Saving Movies to a Computer Saving/Sharing Recordings Saving Movies to a Computer With the software Data Import Utility, you can do the following. - Save scenes to a computer (all scenes/new scenes only). - Join relay scenes (either AVCHD or MP4 format) that were saved on separate memory cards (A 49) and save them as a single scene.
Saving Movies to a Computer Transferring Movies to the Computer After you install the software Data Import Utility, you can save movies to your computer. 118 1 Camcorder: Power the camcorder using the compact power adapter. 2 Camcorder: Set the power switch to MEDIA. 3 Camcorder: Open the desired movie index screen (A 102). 4 Connect the camcorder to the computer using the supplied USB cable. 5 Camcorder: Touch [All (for PC only)]. 6 Computer: Click the icon on the desktop to start Data Import Utility.
Copying Recordings Between Memory Cards Copying Recordings Between Memory Cards You can copy recordings from one memory card to the other. Copying Scenes from the Movie Index Screen Operating modes: 1 Open the desired movie index screen (A 102). • To copy all the scenes recorded on a specific date, drag your finger left/right until a scene you want to copy appears. 2 Open the screen to copy scenes. [FUNC.] > [Copy (6'7)] or [Copy (7'6)] 3 Touch the desired option and then touch [Yes].
Copying Recordings Between Memory Cards Copying Photos from the Index Screen Operating modes: 1 Open the desired photo index screen (A 114). 2 Open the screen to copy photos. [FUNC.] > [Copy (6'7)] or [Copy (7'6)] 120 3 Touch the desired option and then touch [Yes]. • When you select [Select], perform the following procedure to select the individual photos you want to copy before touching [Yes]. • Touch [Stop] to interrupt the operation while it is in progress. • The selected photos are copied.
Converting Movies to MP4 Format Converting Movies to MP4 Format You can convert AVCHD movies into MP4 movies or even convert MP4 movies into smaller MP4 movies. This is convenient, for example, when you want to upload the MP4 movies to the Web. When you convert movies on one memory card, they will be saved to the other memory card. While converting movies, the camcorder can add a cinema-look filter to the converted movie. Operating modes: 121 1 Open the desired movie index screen (A 102).
Copying Recordings to an External Video Recorder Copying Recordings to an External Video Recorder Operating modes: In High Definition 122 Connect the camcorder to Blu-ray Disc recorders and other AVCHD-compatible digital video recorders using the supplied USB cable to make copies of your movies in high definition. If the external digital video recorder has an SD memory card slot*, you can use the memory card to copy your movies without connecting the camcorder.
Copying Recordings to an External Video Recorder 5 Camcorder: Resume playback. • By default, the data code will be embedded in the output video signal. You can change this using the s > [Data Code] setting. 6 External recorder: Start recording when the scene you wish to copy appears; stop recording when it ends. 7 Camcorder: Stop playback.
Introduction to Wi-Fi 9 Wi-Fi Functions Wi-Fi Functions Introduction to Wi-Fi 124 When you use the camcorder’s Wi-Fi function to connect to a smartphone or tablet, you can wirelessly save, play back and upload your recordings. You can even use a smartphone or tablet (iOS or Android device1) as a remote control and record using the device’s Web browser. Refer to Glossary (A 145) for a definition of the frequently used terms in this text.
Introduction to Wi-Fi Wi-Fi connection After you download the Movie Uploader app3, wirelessly connect the camcorder to an iOS device (A 136) to save, play back and upload your recordings. You can even use this connection type if you plan to share videos on YouTube and Facebook on the go. 3 The Movie Uploader app, provided by PIXELA, is available for free from the App Store. 125 iOS device Wi-Fi connection Wirelessly connect the camcorder to a wireless router (access point) on a Wi-Fi network (A 141).
Introduction to Wi-Fi NOTES • While using Wi-Fi functions other than remotely controlling the camcorder using the Browser Remote application, do not open the double memory card slot cover. Before using Wi-Fi functions 126 Based on the function, the camcorder will wirelessly connect to a Wi-Fi-enabled device, such as a smartphone, or directly to a Wi-Fi network via an access point (wireless router)*. After selecting the function you want to use, follow the onscreen directions to connect the camcorder.
Introduction to Wi-Fi About the camcorder’s Wi-Fi standard The specifications of the camcorder's Wi-Fi standard are as follows. Wi-Fi protocol, operating frequency: IEEE 802.11b/g/n-compliant, 2.4 GHz IEEE 802.11a/n-compliant, 5 GHz* Maximum data transfer rate: 11 Mbps (IEEE 802.11b) 54 Mbps (IEEE 802.11a/g)* 150 Mbps (IEEE 802.11n) These are theoretical values and actual data transfer rates may differ. * The IEEE 802.11a protocol and 5 GHz operating frequency are not available for this camcorder.
Remote Operation Via the Browser Remote Application Remote Operation Via the Browser Remote Application You can operate the camcorder remotely via Browser Remote, a Web browser application that can be accessed using the Web browser* of devices compatible with Wi-Fi networks**. The Browser Remote application lets you monitor the image through live view, start and stop recording, and remotely control the shooting mode, exposure, white balance, aperture, gain, shutter speed, focus and zoom.
Remote Operation Via the Browser Remote Application 3 iOS/Android device: Activate Wi-Fi in the settings screen. • The network names of detected access points will appear. 4 iOS/Android device: Touch the access point with the same SSID displayed in step 2. • If you have performed this procedure before and you have not changed the camcorder's password, the connection will be established automatically. 5 iOS/Android device: Enter the camcorder’s password set previously.
Remote Operation Via the Browser Remote Application Advanced controls 1 2 3 4 5 6 7 8 130 9 10 11 12 13 2 14 23 22 15 21 20 19 18 17 16 When the recording program is set to [“ Aperture-Pri. AE]: 11 13 Screen selection tab: Switch between advanced controls and basic controls. Recording program (A 67, 74) Time code (A 78) Browser Remote connection status Operation (A 159) D (key lock): Press to lock all the controls on the application's screens.
Remote Operation Via the Browser Remote Application 8 Remaining battery level (A 159) 9 Memory card status/Remaining recording time: The currently selected memory card slot will be indicated with a Î mark above it.
Remote Operation Via the Browser Remote Application Selecting the recording program 1 Press the recording program button. • The recording programs will appear. 2 Select the desired recording program. Adjusting the exposure compensation value 132 1 Touch [y]. 2 Press the exposure compensation value button. • The exposure compensation screen will appear. 3 Select the desired exposure compensation value.
Remote Operation Via the Browser Remote Application Adjusting the gain 1 Press the gain button. • The available gain values will appear. 2 Select the desired gain value. • The selected value will be displayed on the Browser Remote screen and will be applied to the camcorder. 133 Adjusting the shutter speed 1 Press the shutter speed button. • The available shutter speed values will appear. 2 Select the desired shutter speed value.
Playback via Browser: Viewing Recordings Using a Web Browser on Your iOS or Android Device Playback via Browser: Viewing Recordings Using a Web Browser on Your iOS or Android Device With the Playback via Browser function, you can use the Web browser on your iOS device, Android device, computer or similar device to show a list of recordings in the camcorder, play them back and even download them.* This conveniently allows you to view your recordings while you are out.
Playback via Browser: Viewing Recordings Using a Web Browser on Your iOS or Android Device 10 iOS/Android device: Touch [ ] to return to the index screen. 11 Camcorder: Touch [End] > [OK] when finished. NOTES • The following types of MP4 scenes will be recognized as multiple files on other devices.
Uploading Recordings Using an iOS Device Uploading Recordings Using an iOS Device Using the Movie Uploader app* for iOS devices, you can wirelessly connect the camcorder to the device to upload your movies to YouTube and your movies and photos to Facebook even when you are away from your home network. You can even save** and play back MP4 movies and photos on the iOS device. 136 * The Movie Uploader app, provided by PIXELA, is available for free from the App Store.
Uploading Recordings Using an iOS Device NOTES • Depending on factors such as the wireless network conditions, it can take some time to upload video files. • The procedure above may differ depending on the version of iOS you are using. • For details about the Movie Uploader app, visit PIXELA’s Web site. http://www.pixela.co.jp/oem/canon/e/movieuploader/ (English only) • The following types of MP4 scenes will be recognized as multiple files on other devices.
Playback on a Computer Playback on a Computer Using the Media Server function, you can wirelessly view your movies and photos from your computer or similar device. You will need an access point connected to your home network and software installed on your computer that can play back movies and photos on the media server. We recommend that you connect the computer to the access point using a commercially available LAN cable. Refer also to the instruction manuals for the computer, software and access point.
Transferring Files to a Computer or FTP Server Transferring Files to a Computer or FTP Server You can wirelessly transfer files (recordings) directly to a computer or an FTP server. You will need a correctly configured FTP server. During the manual setup procedure, you will need to enter the FTP server's IP address, port, user name, password and file transfer destination (where the files will be transferred to). To enter text for the various settings, use the virtual keyboard (A 140).
Transferring Files to a Computer or FTP Server Using the virtual keyboard When you need to enter text for various settings, touch the text field and a virtual keyboard will appear on the screen. You must use the touch screen to operate the virtual keyboard. The illustrations below explain the various keys you can use. 140 ! Switch between letters and numbers/special characters. " Change the position of the cursor. # Delete the character to the cursor’s left (backspace). $ Caps Lock.
Wi-Fi Connection Using an Access Point Wi-Fi Connection Using an Access Point The camcorder can connect to a Wi-Fi network using a wireless router (access point) and even remember the settings for the four most recently used access points. General requirements • Correctly configured router that complies with the 802.11a*/b/g/n protocol and is Wi-Fi certified (bears the logo shown on the right) and a home network. * The 802.
Wi-Fi Connection Using an Access Point [WPS: PIN Code] method From a computer or similar device connected to the access point, use the Web browser to open the router’s WPS settings screen. After the 8-digit PIN code appears on the camcorder’s screen, enter it into your router’s WPS settings screen. 2 Within 2 minutes, touch [OK] on the camcorder’s screen. 142 • The camcorder will connect to the access point.
Wi-Fi Connection Using an Access Point 5 For the [IP Address] and [Subnet Mask] fields, touch [0.0.0.0] and then touch [Í]/[Î] to change the value and then touch [Next]. • Touch the next field to change the value, as necessary. 6 Touch [Next]. 7 In the [Default Gateway] field, touch [0.0.0.0] and then touch [Í]/[Î] to change the value and then touch [Next]. • Touch the next field to change the value, as necessary. 8 Touch [Next]. 9 For the [Primary DNS Server] and [Secondary DNS Server] fields, touch [0.
Viewing and Changing Wi-Fi Settings Viewing and Changing Wi-Fi Settings When the camcorder is connected to an access point or to a Wi-Fi-enabled device, you can view the Wi-Fi connection settings and even change them, if necessary. To enter text for the various settings, use the virtual keyboard (A 140). Operating modes: 144 1 Open the [Wi-Fi] screen. [MENU] > s > [Wi-Fi] To view the smartphone’s connection settings 2 Touch [Smartphone Connection]. • The camcorder’s SSID will appear.
Viewing and Changing Wi-Fi Settings Glossary This is a glossary of some of the basic terms used frequently in this chapter. The documentation for your access point may also contain a glossary you can refer to. Access Point A wireless access point (WAP) is a device that allows wireless devices, like your camcorder, to connect to a wired network (including to the Internet) using the Wi-Fi standard. In most cases, this will be your wireless router.
Appendix: Menu Options Lists 10 Additional Information Additional Information Appendix: Menu Options Lists 146 Menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus (A 32). For details about each function, see the reference page. Menu options without a reference page are explained after the tables. Underlined menu options indicate default values. FUNC. Panel FUNC. Panel - Mode AUTO n CINEMA [MENU] Open the setup menus z z z 33 [Rec.
Appendix: Menu Options Lists Setting options/Function AUTO n CINEMA A [Image Effects] [ON], [OFF] When [ON] is selected [Looks]: [Standard], [Highlight Priority], [Wide DR] [Color Depth], [Sharpness], [Contrast], [Brightness]: ±0 (-2 to +2) – z – 76 [„ Browser Remote] [ON], [OFF] z z z 128 Control Button 1 2 Option available only for recording movies. The setting is maintained when the camcorder is switched from (Except for [„ Custom Setting] under [— Audio Scene].) FUNC.
Appendix: Menu Options Lists Menu item 148 A Setting options [Wireless Ctrlr Zoom Speed] 1-16 (8) 63 [High-Speed Zoom] [i On], [j Off] 62 [AF Mode] [= Instant AF], [? Medium AF], [@ Normal AF] 57 [Focus Assistance] [i On], [j Off] – [Face Detection & Tracking] [i On }], [j Off] 58 [Auto Backlight Correction] [i On], [j Off] – [Auto Slow Shutter] [i On], [j Off] – [Flicker Reduction] [j Off], [k Automatic] – [ND Filter] [k Automatic], [j Off] – [Conversion Lens] [¾ TL-H58], [¿
Appendix: Menu Options Lists [Focus Assistance]: When focus assistance is activated, the image at the center of the screen is magnified to help you focus manually (A 55). • Using focus assistance will not affect the recordings. It will be cancelled automatically after 4 seconds or when you start recording. • Focus assistance is available only for movies. [Auto Backlight Correction]: When set to [i On], the camcorder will automatically detect and compensate the exposure for backlit subjects.
Appendix: Menu Options Lists [INPUT 1/2 Limiter]: If set to [i On], the limiter will limit the amplitude of audio signals to prevent audio distortions.
Appendix: Menu Options Lists Menu item [Frame Rate] Setting options For AVCHD movies: [ 50.00i], [ For MP4 movies: [ 25.00P] A y } z – – 50 PF25.00] [Slow & Fast Motion] When the frame rate is 50.00P: [OFF], [x2] When the frame rate is 25.00P: [OFF], [x0.
Appendix: Menu Options Lists • The first three digits of the file number range from 100 to 999 and the last four digits range from 0001 to 9999. File numbers are automatically assigned consecutive numbers. [Available Space in Memory]/[Used Space in Memory]: Displays a screen where you can verify how much 152 of the memory card is currently available for recording or how much is in use (« total recording time and ª total number of photos).
Appendix: Menu Options Lists Menu item Setting options y } A [CUSTOM Dial & Button] [” Tv/Av], [l Manual Exposure], [x AGC Limit], [y Exposure], [j Off] z – – 98 [Assign Button 1] to [Assign Button 5]* [È Powered IS], [° BLC Always On], [~ Face Only AF], [¦ Video Snapshot], [Ä WB Priority], [z Pre REC], [< IR Light], [œ Audio Output CH], [ AF/MF], [ Rec Review], [ Rec.
Appendix: Menu Options Lists Menu item Setting options [Certification Logo Display] – [Demo Mode] 154 [i On], [j Off] [Firmware] [Reset All] – [No], [Yes] A y } z z z – z – – – z – – – z z z – * The default settings are as follows. [Assign Button 1]: [ AF/MF], [Assign Button 2]: [z PRE REC], [Assign Button 3]: [j Off], [Assign Button 4]: [j Off], [Assign Button 5]: [ Rec Review]. ** Option available only when the optional GP-E2 GPS Receiver is attached to the camcorder.
Appendix: Menu Options Lists [Focus Ring Direction]: Changes the direction the focus/zoom ring needs to be turned. This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom ring switch is set to FOCUS). [Focus Ring Response]: Selects the sensitivity of the response when operating the focus/zoom ring. This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom ring switch is set to FOCUS).
Appendix: Onscreen Icons and Displays Appendix: Onscreen Icons and Displays Recording Movies 8 9 10 11 1213 14 15 16 17 15 18 1 156 2 3 4 5 6 7 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Control button [FUNC.]: Open the FUNC.
Appendix: Onscreen Icons and Displays Recording Movies mode 36 8 9 mode 12 13 1 29 30 31 32 4 33 34 35 15 1 17 16 37 38 39 44 45 31 3 4 46 47 40 41 42 43 29 Recording program (A 67, 69, 74) ; Infrared mode (A 96), < / = Infrared light on/off (A 96) 30 Exposure compensation (A 70) 31 AGC limit (A 66); Gain (during the [n Manual Exposure] recording program) (A 69) 32 Manual focus (A 55) 33 Backlight correction (A 71) 34 White balance (A 72) 35 GPS (A 97) 36 Image effects (A 76) 37 Wind screen (
Appendix: Onscreen Icons and Displays Playing Movies (during playback) 41 9 17 14 8 50 51 27 48 16 158 49 52 53 48 / Slow/Fast motion rate (A 51) 49 Playback control buttons (A 103) 50 Scene number 51 File number (A 151) 52 Data code (A 95, 150) 53 Volume controls (A 103) Viewing Photos 54 1 55 51 52 56 54 Control button [MENU]: Open the setup menus (A 33, 147) 55 Current photo / Total number of photos 57 56 Control button [f]: Return to the photo index screen (A 114) 57 Control button [h]: Phot
Appendix: Onscreen Icons and Displays 9 Operation Ü Record, Ñ Record standby, Ð Playback, Ý Playback pause, × Fast playback, Ø Fast reverse playback, Õ Slow playback, Ö Slow reverse playback, Ó Frame advance, Ô Frame reverse. 14 Remaining battery time • The icon shows a rough estimate of the remaining 100% 75% 50% 25% 0% charge as a percentage of the full charge of the battery pack. The remaining recording/playback time of the battery pack is displayed, in minutes, next to the icon.
Troubleshooting Troubleshooting If you have a problem with your camcorder, refer to this section. Sometimes what you think is a malfunction of the camcorder may have the simplest of solutions - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult your dealer or a Canon Service Center if the problem persists.
Troubleshooting Recording Pressing Y will not start recording. - You cannot record while the camcorder is writing previous recordings onto a memory card (while the ACCESS indicator is on or flashing). Wait until the camcorder has finished. - The memory card is full or it already contains 3,999 scenes (the maximum number of scenes for AVCHD movies). Delete some recordings (A 106, 116) or initialize the memory card (A 37) to free some space. - The file numbers have reached their maximum value.
Troubleshooting Cannot mark individual scenes/photos in the index screen with a checkmark ! - You cannot select more than 100 scenes/photos individually. Select the [All Scenes] or [All Photos] option instead of [Select]. Indicators and Onscreen Displays 162 lights up in red. - Battery pack is exhausted. Replace or charge the battery pack. appears on the screen. - The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be displayed.
Troubleshooting Horizontal bands appear on the screen. - This is a phenomenon typical of CMOS image sensors when recording under certain lighting conditions. This is not a malfunction. You may be able to reduce the symptoms by setting p > [Flicker Reduction] to [Automatic]. Alternatively, set the shutter speed to a value matching the frequency of the local electrical system (1/100 for 50 Hz systems, 1/60 for 60 Hz systems). Viewfinder picture is blurred.
Troubleshooting Playback looks fine on the camcorder but there is no image on the TV screen. - The video input on the TV is not set to the video terminal to which you connected the camcorder. Select the correct video input. 164 The camcorder is connected using the supplied High Speed HDMI cable, but there is no picture or sound from the HDTV. - Disconnect the High Speed HDMI cable and then restore the connection or turn the camcorder off and then on again.
Troubleshooting The wireless connection was interrupted while transferring files. - Incomplete files may remain at the transfer destination. If incomplete files remain at the transfer destination, check the content and make sure they are safe to delete before deleting them. - Select [New Files] and perform the file transfer again. Cannot connect a Wi-Fi-enabled external device wirelessly to the camcorder. - Use the q > [Reset All] setting to reset the camcorder.
Troubleshooting Cannot play back Initialize only using the camcorder - The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder (A 37). Cannot record - There is a problem with the memory card. If this message appears often without apparent reason, contact a Canon Service Center. 166 Cannot record Check the memory card - There is a problem with the memory card.
Troubleshooting Mem. Card Number of scenes already at maximum - The memory card already contains 3,999 scenes (the maximum number of scenes for AVCHD movies); no further scenes can be copied onto the memory card. Delete some scenes (A 106) to free some space. Mem. Card Unable to recognize the data - The memory card contains scenes recorded using a video configuration that is not supported (NTSC). Play back the recordings in the memory card with the device originally used to record them.
Troubleshooting 168 Recording was stopped due to insufficient write speed of the memory card - The write speed of the memory card was too slow so recording was stopped. Replace the memory card with one rated SD Speed Class 4, 6 or 10. - When the recording mode is 28 Mbps LPCM (50.00P), 28 Mbps (50.00P) or 35 Mbps (50.00P), you must use a memory card rated SD Speed Class 6 or 10. - When recoding movies using slow & fast motion, you must use a memory card rated SD Speed Class 10.
Troubleshooting List of Messages for Wi-Fi Functions Refer also to the instruction manual of your access point and other devices you will use. Another user is already controlling the camcorder. Try again later. - This message appears on the screen of the Wi-Fi device. Multiple Wi-Fi devices are trying to connect with the camcorder. Make sure only one Wi-Fi device is trying to connect and then touch Retry.
Troubleshooting 170 Unable to obtain an IP address - If you are not using a DHCP server, connect using the [Manual Setup] option and enter the IP address using the [Manual] option (A 142). - Turn on the DHCP server. If it is already on, make sure it is functioning properly. - Make sure the address range for the DHCP server is sufficient. - Turn on the DNS server. If it is already on, make sure it is functioning properly.
Handling Precautions Handling Precautions Camcorder Be sure to observe the following precautions to ensure maximum performance. • Save your recordings periodically. Make sure to transfer your recordings to an external device such as a computer or digital video recorder (A 117) and save them on a regular basis. This will protect your important recordings in case of damage and create more free space on the memory card. Canon shall not be liable for any data loss.
Handling Precautions 172 • When mounting the camcorder on a tripod, make sure that the 6.5 mm tripod’s fastening screw is shorter than 6.5 mm. Using other tripods may damage the camcorder. • When recording movies, try to get a calm, stable picture. Excessive camcorder movement while shooting and extensive use of fast zooms and panning can result in jittery scenes. In extreme cases, the playback of such scenes may result in visually induced motion sickness.
Handling Precautions Regarding the use of non-Canon battery packs • For your safety, battery packs that are not genuine Canon battery packs will not be charged even if you attach them to this camcorder or to the optional CG-800E Battery Charger. • We recommend using genuine Canon battery packs bearing the Intelligent System mark. • If you attach to the camcorder battery packs that are not genuine Canon battery packs, will appear and the remaining battery time will not be displayed.
Handling Precautions Lithium Button Battery WARNING! 174 • The battery used in this device may present a fire or chemical burn hazard if mishandled. • Do not disassemble, modify, immerse in water, heat above 100 °C or incinerate the battery. • Do not insert the battery into the mouth. If swallowed, seek medical assistance immediately. The battery case may break and the battery fluids may cause internal injuries. • Keep the battery out of the reach of children.
Maintenance/Others Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens, Viewfinder and Instant AF Sensor • If the lens surface or Instant AF sensor is dirty, autofocus may not work properly. • Remove any dust or dirt particles using a non-aerosol type blower. • Use a clean, soft lens-cleaning cloth to gently wipe the lens or viewfinder. Never use tissue paper.
Maintenance/Others Using the Camcorder Abroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug adapters for overseas use. 176 Playback on a TV Screen You can only play back your recordings on TVs compatible with the PAL system.
Optional Accessories Optional Accessories (Availability differs from area to area) The following optional accessories are compatible with this camcorder. Select accessories are described in more detail in the following pages.
Optional Accessories Battery Packs When you need extra battery packs, select one of the following models: BP-820 or BP-828. 178 When you use battery packs bearing the Intelligent System mark, the camcorder will communicate with the battery and display the remaining usage time (accurate to 1 minute). You can only use and charge these battery packs with camcorders and chargers compatible with Intelligent System. CG-800E Battery Charger Use the battery charger to charge the battery packs.
Optional Accessories SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. 179 This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.
Specifications Specifications XA35 / XA30 180 — Values given are approximate figures. System • Recording System Movies: AVCHD1 Video: MPEG-4 AVC/H.264; Audio: Linear PCM, 16 bits, 48 kHz, 2ch2 Dolby Digital 2ch MP4 Video: MPEG-4 AVC/H.264 Audio: MPEG-2 AAC-LC (2ch) Photos: DCF (Design rule for Camera File system), compatible with Exif3 Ver. 2.3 Image type: JPEG 1 2 3 Compatible with AVCHD ver. 2.0 specifications. Linear PCM is available only when the recording mode is 28 Mbps LPCM (50.
Specifications • Image Sensor 1/2.84-type CMOS, 3,090,000 pixels Effective pixels: 2,910,000 pixels • OLED Touch Screen: 8.77 cm (3.5 in.), wide, TFT color, equivalent to 1,230,000 dots, 100% coverage, touch operation • Viewfinder: 0.61 cm (0.24 in.), wide, color, equivalent to 1,560,000 dots, 100% coverage • Microphone: Stereo electret condenser microphone • Lens f=3.67-73.4 mm, F/1.8-2.8, 20x optical zoom, 8-bladed circular aperture 35 mm equivalent: 26.8 – 576 mm 28.
Specifications Terminals 182 • HD/SD-SDI Terminal BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced HD-SDI: SMPTE 292M Video: 1080i, 720P SD-SDI: SMPTE 259M Video: 576i Embedded audio, time code (VITC/LTC) • HDMI OUT Terminal: HDMI mini connector; output only • USB Terminal: mini-B receptacle, Hi-Speed USB; output only • AV OUT Terminal ∅ 3.5 mm 4-pole minijack; output only Video: 1 Vp-p / 75 Ω unbalanced Audio: –10 dBV (47 kΩ load) / 3 kΩ or less • MIC Terminal ∅ 3.
Specifications CA-570 Compact Power Adapter • Power supply: 100 – 240 V AC, 50/60 Hz • Rated output / consumption: 8.4 V DC, 1.5 A / 29 VA (100 V) – 39 VA (240 V) • Operating temperature: 0 – 40 °C • Dimensions: 52 x 29 x 90 mm • Weight: 135 g 183 BP-820 Battery Pack • Battery type Rechargeable lithium ion battery, compatible with Intelligent System • Rated voltage: 7.4 V DC • Operating temperature: 0 – 40 °C • Battery capacity: 1780 mAh (typical); 13 Wh / 1700 mAh (minimum) • Dimensions: 30.7 x 39.
Reference Tables Reference Tables Charging, Recording and Playback Times The charging times given in the following table are approximate and vary according to charging conditions and initial charge of the battery pack. 184 Battery pack→ BP-820 Charging conditions↓ BP-828 Using the camcorder 275 min. 405 min. Using the CG-800E Battery Charger 190 min. 260 min.
Reference Tables Recording MP4 movies Battery pack BP-820 BP-828 Recording mode Recording (maximum) Recording (typical)* Playback OLED Viewfinder OLED Viewfinder OLED 35 Mbps (50.00P) 155 min. 155 min. 85 min. 85 min. 235 min. 24 Mbps 165 min. 165 min. 100 min. 100 min. 240 min. 17 Mbps 165 min. 165 min. 100 min. 100 min. 240 min. 4 Mbps 175 min. 170 min. 100 min. 100 min. 250 min. 3 Mbps 175 min. 175 min. 100 min. 100 min. 255 min. 35 Mbps (50.00P) 220 min.
Reference Tables Recording MP4 movies Battery pack 186 BP-820 BP-828 Recording mode Recording (maximum) Recording (typical)* Playback OLED Viewfinder OLED Viewfinder OLED 35 Mbps (50.00P) 150 min. 150 min. 90 min. 90 min. 240 min. 24 Mbps 170 min. 170 min. 100 min. 100 min. 255 min. 17 Mbps 170 min. 170 min. 100 min. 100 min. 255 min. 4 Mbps 175 min. 175 min. 105 min. 105 min. 260 min. 3 Mbps 180 min. 180 min. 105 min. 105 min. 265 min. 35 Mbps (50.00P) 220 min.
Index A Dual recording . . . . . . . . . . . . . . . . . . . . . . . . . 49 Abroad, using the camcorder . . . . . . . . . . . 176 AGC (automatic gain control) limit . . . . . . . . . 66 Aperture (f number) . . . . . . . . . . . . . . . . . . 67, 69 Aspect ratio of a connected TV (TV type) . . . . . . . . . . . . . . . . . . . . . . . . . 150 Assignable buttons . . . . . . . . . . . . . . . . . . . . . 99 Audio equalizer . . . . . . . . . . . . . . . . . . . . . . . . 86 Audio output . . . . . . . . . . .
Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149 Memory card . . . . . . . . . . . . . . . . . . . . . . .36, 173 Menu settings, saving and loading . . . . . . . .101 MIC terminal . . . . . . . . . . . . . . . . . . . . . . . .82, 83 Microphone attenuator . . . . . . . . . . . . . . . .85, 90 Microphone directionality . . . . . . . . . . . . . . . .86 Mode switch . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Monitor delay . . . . . . . . . . . . . . . . . . . . . . . . .
Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Europa N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands http://www.canon-europe.com ASIA and HONG KONG, S.A.R. Canon Hongkong Company Ltd 19/F, The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong +852 3191 2333, +852 2428 3963 AUSTRALIA http://www.canon.com.au Canon Australia Pty Ltd 13-13-83 (within Australia only) (61) 02-9805-2555 CENTRO Y SURAMÉRICA http://www.cla.canon.com CANON LATIN AMERICA, INC.
