XC15 Instruction Manual

129
Viewing and Changing Wi-Fi Settings
Menus
Table of Contents Index
Viewing and Changing Wi-Fi Settings
You can view and change Wi-Fi connection settings saved in the camcorder. Because the settings must be
changed manually, adequate knowledge about configuring and using Wi-Fi networks is required. If Browser
Remote has been activated, deactivate it before performing the following settings (A 131).
To enter text for the various settings, use the virtual keyboard (A 127).
Viewing the smartphone’s connection settings
1 Press the MENU button.
2Open the [— Smartphone Connection] screen.
[— Wi-Fi Setup] > [1] > [Smartphone Connection]
• The camcorder’s SSID (network name), password and operating
frequency will appear.
To change the SSID and password
3 Touch [ ] next to [Camcorder’s Password] and then touch [OK].
• The camcorder will randomly choose a new SSID and password.
4 Touch [OK] and then touch [X].
To change the operating frequency
3Touch [ ] next to [Frequency].
4 Select [2.4 GHz] or [5 GHz].
5Touch [K] twice and then touch [X].
Viewing the access point’s connection settings
1 Press the MENU button.
2Open the [— Access Point Connection] screen.
[— Wi-Fi Setup] > [1] > [Access Point Connection]
• The SSID (network name) of access points saved in the camcorder’s
memory will appear.
• To add an access point, touch [Not configured] and then perform the
procedure in
Wireless Connections Using Wi-Fi (A 125). After doing
so, the [— Wi-Fi Setup] menu will appear.
3 Touch the SSID of the access point whose settings you want to view or change.
• The access point’s settings will appear. You cannot change the MAC address.
•Touch [Í] and [Î] to view more information.
• To delete the settings, touch [Edit] > [Delete] > [Yes].
• To change the settings, touch [Edit] > [Manual Setup] and then perform the procedure in
Manual Setup
(A 128).
4Touch [K] twice and then touch [X].
Operating modes:
[— Wi-Fi Setup]
[1]
[Smartphone Connection]
[— Wi-Fi Setup]
[1]
[Access Point Connection]