XC15 Quick Guide

24
Step 2: Preparing the Camcorder
3Using the supplied unit cable, connect the
microphone adapter’s AUDIO terminal to the
camcorder’s AUDIO terminal (햶).
• Align the Í marks on the unit cable’s plugs and
terminals.
• The unit cable’s connectors are interchangeable
and either end can be plugged into either
terminal.
4 Put the unit cable through the cable clamp
(햷).
Removing the Microphone Adapter
1 Remove the unit cable from the cable clamp.
2 Disconnect the unit cable from the camcorder’s
and the microphone adapter’s AUDIO terminals
(햲).
• Pull back the metallic tip of the plug and then
disconnect the cable from the terminal.
3 Unscrew the lock screw at the bottom of the
microphone adapter (햳) and then gently slide out
the microphone adapter from the camcorder’s
accessory shoe (햴).
햶
햶
햷
햳
햲
햴