Manual
Table Of Contents
- To Start Menu
- How to Use This Manual
- Projector Highlights
- Quick Reference Guide
- Table of Contents
- Safety Instructions
- For Safe Use
- Before Use
- Projecting an Image
- Useful Functions Available During a Presentation
- Setting Functions from Menus
- Using Menus
- Setting Display Status (Input Settings)
- Selecting the Aspect
- Setup Using Auto PC
- Selecting an Input Signal
- Adjusting the Input Signal (Total dots)
- Adjusting the Input Signal (Tracking)
- Adjusting the Input Signal (Horizontal position)
- Adjusting the Input Signal (Vertical Position)
- Adjusting the Input Signal (Horizontal pixels)
- Adjusting the Input Signal (Vertical pixels)
- Adjusting HDMI Input Level
- Setting the HDMI Color Format
- Specifying HDMI Overscan
- Specifying Progressive Processing
- Specifying the Slideshow Interval
- Specifying Split- Screen Display
- Adjusting Image Quality (Image Adjustment)
- Specifying Image Priority in Split-Screen Mode
- Specifying the Image Mode
- Creating/Saving a User Profile
- Adjusting Brightness
- Adjusting Contrast
- Adjusting Sharpness
- Correcting Gamma
- Adjusting Colors
- Adjusting to the Ambient Light (Ambient Light)
- Reducing Image Noise (Noise reduction)
- Dynamic Gamma Adjustment
- Correcting Memory Color
- Fine-Tuning Colors (6-axis Color Adjustment)
- Fine-Tuning Gamma
- Controlling Contrast (Iris)
- Specifying the Lamp Mode
- Resetting Image Adjustment Settings
- Customizing System Operation (System Settings)
- Registering User Logos
- Positioning User Logos
- No Signal Screen
- Screen When Blank
- Selecting a Logo at Startup
- Specifying Auto Power-Off
- Specifying Direct Power-On
- Specifying Silence or Operating Tones
- Specifying Key Repeat Operation
- Locking Projector or Remote Buttons
- Assigning a Channel for Remote Control
- Reducing Motion Blur
- Specifying HDMI Input
- Selecting a Display Language
- Requiring a Password for Operation
- Setting a Password
- Restoring Original Gamma Settings
- Resetting the Lamp Counter
- Resetting the Air Filter Counter
- Updating the Firmware
- Resetting to the Default Setting
- Checking Projector Information
- Installation
- Before Installation
- Installation Procedure
- Connection Procedure
- Starting Projection
- Installation-Related Menu Settings
- Locking Installation Settings
- Flipping Image Display
- Specifying the Screen Aspect
- Specifying Keystone Correction
- Specifying Digital Image Shift
- Specifying Micro Digital Image Shift
- Adjusting Image Registration
- Specifying the Fan Mode
- Specifying Vertical Projection
- Selecting the Audio In Terminal
- Adjusting Colors to Suit the Screen Color
- Specifying a Menu Position
- Showing/Hiding the Guide Screen
- Showing/Hiding Input Status
- Showing/Hiding Overheat Warnings
- Specifying the Menu Display Time
- Showing/Hiding Lamp Replacement Warnings
- Showing/Hiding Filter Cleaning Warnings
- Showing/Hiding Split- Screen ID
- Showing/Hiding the Test Pattern
- Projecting from Multiple Projectors at Once (Edge Blending)
- Connecting to a Network
- Network Connection Overview
- Completing Projector Settings
- Locking/Unlocking Network Settings
- Enabling/Disabling the Network Password
- Registering a Network Password
- Enabling/Disabling Wired Network Functions
- Specifying Standby Power Consumption
- Viewing the IP Address
- Viewing the Gateway Address
- Viewing the MAC Address
- Enabling/Disabling DHCP
- Specifying TCP/IP Settings
- Initializing Network Settings
- Specifying PJLink Settings
- Specifying Use of AMX Device Discovery
- Specifying Use of Crestron RoomView
- Completing Computer Settings
- Maintenance
- Networked Multi- Projection Overview
- Operation in Each Mode
- Functions in All Modes
- Using the Session Selection Menu
- Using the Projector Selection Menu
- Using Layout Functions
- Switching Projectors Used for the Layout
- Controlling all Projectors at Once
- Projecting from Multiple Projectors (Multi-Projection)
- Switching the Primary/Secondary Monitor
- Temporarily Enlarge Images
- Projecting Session Information
- Fully Blanking Projection
- Blanking Projection from Your Computer
- Checking for Computers That Join or Leave Sessions
- Completing Application Projection Settings
- Reducing Windows to a Compact Size
- Tips for Better Networked Projection
- Restrictions
- Appendix
- Troubleshooting
- Relationship between Aspect and Screen Aspect
- When the image is projected on a 16:10 screen
- When the image is projected on a 16:9 screen
- When the image is projected on a 4:3 screen
- When projecting on a 16:10 screen in the aspect ratio of the connected device
- When projecting on a 16:9 screen in the aspect ratio of the connected device
- When projecting on a 4:3 screen in the aspect ratio of the connected device
- Displayed Test Patterns
- Supported Signal Types
- Product Specifications
- Index
- Option
- Menu Configuration
290
Product Specifications
■ Projector
Model name WUX450 WX520
Display system RGB liquid crystal system
Optical system
Color separation by dichroic mirror / polarizing beam splitter
and color composition by prism
Display device
Type Reflective liquid crystal panel
Size / Aspect ratio 0.71'' x 3 / 16:10 0.70'' x 3 / 16:10
Drive system Active matrix system
Number dots / Total
number dots
2,304,000 (1920 x 1200) x
3 panels / 6,912,000
1,296,000 (1440 x 900) x
3 panels / 3,888,000
Projection lens
Zoom ratio / Focal length /
F value
1.8x / 21.7 – 39.0 mm / f2.8
Zooming / Focusing
system
Manual / Manual
Lens shift
V: 0% to +60% (manual)
H: ±10% (manual)
V: 0% to +62% (manual)
H: ±10% (manual)
Light source 250-NSHA 260 W
Image size (projection
distance)
40'' to 300'' (1.2 to 16.2 m) 40'' to 300'' (1.2 to 16.6 m)
Number of colors 16,770,000 colors (full color)
Brightness*
2
(in presentation
mode)
4500 lumen 5200 lumen
Contrast ratio*
2
2000:1 (Fully white:fully black, presentation mode, Iris [On])
Ratio of brightness at
periphery to center*
2
90%
Speaker 5W monaural x 1
Maximum input resolution 1920 x 1200 dots 1920 x 1080 dots
Video signals
Analog PC input
WUXGA*
1
/ WSXGA+ / UXGA / WXGA+ / SXGA+ / SXGA /
WXGA / XGA / SVGA / VGA
Digital PC input
D-WUXGA*
1
/ D-WSXGA+ / D-UXGA / D-WXGA+ / D-SXGA+ /
D-SXGA / D-WXGA / D-XGA / D-SVGA / D-VGA
HDMI input
From connected computers:
WUXGA*
1
/ WSXGA+ / UXGA / WXGA+ / SXGA+ / SXGA /
WXGA / XGA / SVGA / VGA
From connected AV equipment:
1080p / 1080i / 720p / 576p / 480p
Component video input 1080PsF / 1080p / 1080i / 720p / 576p / 576i / 480p / 480i
Input terminal
DVI-I terminal Analog PC, Digital PC (29-pin DVI connector)
HDMI terminal Digital PC, digital video input (deep color only)
ANALOG PC /
COMPONENT terminal
Analog PC, Component (mini D-sub 15-pin)
LAN terminal Networked multi-projection (RJ-45)
USB Port JPEG images (USB Mass Storage Class)
CONTROL terminal RS-232C (D-sub 9-pin)
REMOTE terminal Wired remote control (3.5ø stereo mini jack)
AUDIO IN terminal Audio signal (3.5ø stereo mini jack x 2)
AUDIO OUT terminal Audio signal (3.5ø stereo mini jack)