PUB.
Important Usage Instructions 2 WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. For Canada only: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO DRIPPING OR SPLASHING. WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
Important Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Trademark Acknowledgements • SD and SDHC Logos are trademarks of SD-3C, LLC. • CompactFlash is a trademark of SanDisk Corporation. • Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. • Apple, Macintosh, Mac OS, Final Cut Pro are trademarks of Apple Inc., registered in the U.S. and other countries. • Avid, Media Composer and NewsCutter are trademarks or registered trademarks of Avid Technology, Inc.
Highlights of the XF105/XF100 The Canon XF105/XF100 HD Camcorder has been designed with quality and functionality at the forefront while maintaining a compact size. The following are just some of the many features that will help turn your creative vision into reality. 5 HD Recording CMOS system and DIGIC DV III image processor The camcorder is equipped with a 1/3-in. CMOS sensor that captures video at an effective pixel count of approximately 2.07 megapixels (1920x1080).
Advanced Professional Features Other Functions Pro-level connectivity (b only) An industry-standard HD/SD SDI terminal (0 127) for uncompressed HD signal output, embedded audio and SMPTE time code (LTC) give the camcorder the functionality of professional broadcast cameras. Genlock synchronization (0 74) and time code synchronization (0 74) allow the camcorder to be part of any multi-camera shooting setup. Audio Sound is recorded as 2-channel linear PCM audio (16-bit/48 kHz).
Table of Contents 7 1. Introduction 10 3.
Setting the Time Code 70 Selecting the Running Mode 70 Selecting Drop or Non-Drop Frame 71 Putting the Time Code Display on Hold 71 Setting the User Bit 73 b Synchronizing with an External Device 74 Connecting an External Device 74 Using a Reference Video Signal (Genlock Synchronization) 74 Using a Time Code Signal 74 Time Code Signal Output 75 Recording Audio 77 Using the Built-in or External Microphone Connected to the MIC Terminal 77 Using Line Input or an External Microphone Connected to an XLR Termin
Clip Operations 116 Using the Clip Menu 117 Displaying Clip Information 117 Adding e Marks or Z Marks 118 Deleting e Marks or Z Marks 118 Copying Clips 119 Deleting Clips 120 Deleting the User Memo 120 Copying a Custom Picture File Embedded in a Clip 121 Displaying an Index Screen of Shot Marks 121 Displaying a Frame Index Screen of a Single Clip 122 Adding or Deleting Shot Marks from an Index Screen 122 Changing a Clip’s Thumbnail 123 6.
1 Introduction 10 About this Manual Thank you for purchasing the Canon XF105/XF100. Please read this manual carefully before you use the camcorder and retain it for future reference. Should the camcorder fail to operate correctly, refer to Troubleshooting (0 162). Conventions Used in this Manual • IMPORTANT: Precautions related to the camcorder’s operation. • NOTES: Additional topics that complement the basic operating procedures. • 0: Reference page number.
About this Manual When a function requires the use of the menu, the quick reference shows the submenus and, when applicable, the default setting for the menu item. The example illustration indicates that you can find the function by selecting the [J Other Functions] menu and then the [Rec Review] menu item. Operating modes indicates that a function is available in the operating mode indicated and indicates that the function is not available.
Supplied Accessories Supplied Accessories The following accessories are supplied with the camcorder. 12 * CA-930 Compact Power Adapter (incl. power cord) Microphone holder unit BP-925 Battery Pack (incl. terminal cover) DC-930 DC Cable CTC-100/S Component Cable Lens Hood Lens Cap WL-D6000 Wireless Controller (incl. CR2025 Lithium Battery) SS-1200 Shoulder Strap Canon XF Utilities Disc* The Canon XF Utilities Disc includes software for saving and managing clips on a computer.
Names of Parts Names of Parts 2 Operation panel 햲 (0 19) 13 1 3 4 5 Operation panel 햳 (0 19) 6 7 8 9 21 1 2 3 4 5 6 7 8 9 20 19 18 17 16 15 14 13 12 CF card slot covers for CF card slot A (CFj) and CF card slot B (CFl) CF card slots A (CFj) and B (CFl) (0 35) CF card release buttons (0 36) d switch (0 25) ON/OFF indicator SLOT SELECT (CF card slot selection) button (0 38) DISP. button (0 43)/ BATT.
Names of Parts 1 2 3 4 5 6 14 Terminals 햲 (0 20) 10 9 1 2 3 4 5 6 7 8 9 10 8 7 REMOTE terminal SD card access indicator (0 37) SD card slot (0 37) SD card slot cover MIC (microphone) terminal (0 77) XLR terminals (CH1 and CH2) (0 78) Lens hood lock screw (0 30) b HD/SD SDI terminal (0 127) b GENLOCK terminal (0 74) / TC (time code) terminal (0 74) Grip belt (0 32)
Names of Parts 11 10 15 1 9 8 7 2 3 6 5 1 2 3 4 5 6 7 8 9 10 11 4 Built-in microphone (0 77) Built-in speaker (0 115) Strap mount (0 32) CUSTOM (customizable) button (0 47) INFRARED switch (0 93) Instant AF sensor (0 50) Remote sensor (0 34) Infrared light (0 93) Microphone cable clamp (0 78) Microphone holder unit (0 78) Microphone lock screw (0 78)
Names of Parts 1 16 2 13 12 11 3 4 10 9 8 7 6 Terminals 햳 (0 20) 1 2 3 4 5 6 7 8 9 10 11 12 13 Viewfinder (0 30, 31) Dioptric adjustment lever (0 30) BATT.
Names of Parts 1 2 3 4 5 6 7 8 17 11 1 2 10 9 Front tally lamp (0 40) Accessory shoe For attaching accessories such as the optional VL-10Li II Battery Video Light. 3 Rear tally lamp (0 40) 4 START/STOP lock lever (0 41) 5 START/STOP button (0 40) 6 Handle socket for 1/4" screws 7 Grip zoom rocker (0 64) 8 MAGN.
Names of Parts 1 18 2 4 3 1 2 3 4 Attachment sockets for the optional TA-100 Tripod Adapter (0 34) Attachment screws for a tripod base (0 34) Tripod socket (0 34) Tripod base for tripods with 1/4" screws (0 34)
Names of Parts 19 Operation panel 햲 1 2 3 Audio level switches for CH1 and CH2 (0 81) XLR terminal switches for CH1 and CH2 (0 79) AUDIO IN switches for CH1 and CH2 (0 77, 79) 4 D (play/pause) button (0 112)/ Assignable button 6 (0 97) I (fast playback) button (0 114)/ Assignable button 7 (0 97) K (skip forward) button (0 114)/ Assignable button 10 (0 97) B (stop) button (0 112)/ Assignable button 9 (0 97) L (skip backward) button (0 114)/ Assignable button 8 (0 97) J (fast reverse playback) button (0
Names of Parts 20 Terminals 햲 1 2 HD/SD COMPONENT OUT terminal (0 127) USB terminal (0 131) HDMI OUT terminal (0 127) 4 5 6 W (headphone) terminal (0 81) AV terminal (0 128) DC IN terminal (0 24) 3 Terminals 햳 4 1 2 3 5 6
Names of Parts WL-D6000 Wireless Controller 1 14 13 12 11 10 2 9 8 4 7 5 3 6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 START/STOP button (0 40) ZOOM buttons (0 65) F/O/E/A buttons MENU button (0 28) J/I (fast playback/reverse playback) buttons (0 114) Z/Y (frame forward/reverse) buttons (0 114) B (stop) button (0 112) D (play/pause) button (0 112) INDEX button (0 112) SET button (0 28) CANCEL button (0 28) SHOT1 (shot mark 1) button (0 86) PHOTO button (0 138) Record enable button: When you use the START/
2 Preparations 22 Preparing the Power Supply You can power the camcorder using a battery pack or directly using the compact power adapter. If you connect the compact power adapter to the camcorder while a battery pack is attached, the camcorder will draw power from the power outlet. Charge battery packs before use. For approximate charging times and recording/playback times with a fully charged battery pack, refer to Charging Times (0 173) and Recording and Playback Times (0 173).
Preparing the Power Supply Attaching the Battery Pack 1 Move the d switch to OFF (햲). 2 Insert the battery pack all the way into the compartment and press gently until it clicks (햳). 23 Removing the Battery Pack 1 Move the d switch to OFF. 2 Hold down the BATT. RELEASE (battery release) key and remove the battery.
Preparing the Power Supply 24 When the camcorder is off and an Intelligent System-compatible battery pack is attached, press the BATT. (battery information) button to display the remaining battery time and available recording time (displays for 5 seconds). Depending on the battery life, the battery information may not be displayed. IMPORTANT • Do not connect to the compact power adapter any product that is not expressly recommended for use with this camcorder.
Preparing the Power Supply When Using the Optional CA-920 Compact Power Adapter and DC-920 DC Coupler: 1 Move the d switch to OFF (햲). 2 Attach the DC coupler to the camcorder (햳). 3 Connect the power cord to the compact power adapter and plug it into a power outlet (햴). 4 Connect the DC coupler to the adapter (햵). 5 Detach the DC coupler after use. • Push the BATT. RELEASE key and pull out the DC coupler. IMPORTANT • Turn off the camcorder before connecting or disconnecting the compact power adapter.
Date, Time and Language Settings Date, Time and Language Settings Setting the Date and Time 26 You will need to set the date and time of the camcorder before you can start using it. When the camcorder’s clock is not set, the [Date/Time] screen will appear automatically with the year selected. Operating modes: 1 Push the joystick up/down to change the month then move (A) to the day. 2 Change the rest of the fields in the same way.
Date, Time and Language Settings Displaying the Date and Time while Recording [M LCD/VF Setup] You can display the date and time in the lower left of the screen. Operating modes: 1 Press the MENU button. 2 Push the joystick up/down to select [M LCD/VF Setup]. [Custom Display 2] [Date/Time] [Off] 3 Select [Custom Display 2] and then [Date/Time] in a similar fashion. 4 Push the joystick up/down to select the information to display. • Select [Off] to record without displaying the date and time.
Using the Menus Using the Menus 28 In mode, many of the camcorder’s functions can be adjusted from the menu for general settings, which opens after pressing the MENU button. In mode, press the MENU button to open the menu for general settings or SET to open the clip menu for clip operations. For details about the available menu options and settings, refer to Menu Options (0 145). Operating modes: MENU button Press to open the menu and then press again to close the menu after adjusting desired settings.
Using the Menus NOTES • Unavailable items may appear grayed out. • Pressing the MENU button at any time closes the menu. • When using the wireless controller, use the h, i, f, g and SET buttons in the same way as the camcorder’s joystick. • You can check the current settings on the status screens (0 156).
Preparing the Camcorder Preparing the Camcorder This section outlines the basic preparations for the camcorder such as attaching the lens hood, attaching the microphone holder unit, and adjusting the viewfinder and LCD screen. 30 Attaching the Microphone Holder Unit Use the supplied screws to attach the microphone holder unit to the handle. Attaching the Lens Hood Attach the lens hood to protect the lens and reduce the amount of stray light that may hit the lens.
Preparing the Camcorder Using the LCD Panel Open the LCD panel 90 degrees. • You can rotate the panel 90 degrees downward or 180 degrees toward the lens. 31 NOTES • By default, the viewfinder screen is turned off while you use the LCD screen. However, you can also use both displays simultaneously. See the following section. • You can set the LCD screen to black & white (0 32).
Preparing the Camcorder Setting the Screen to Black & White 32 The viewfinder and LCD screen display in color by default but you can set them to black & white. Even when the screen is black & white, onscreen text and icons will still be displayed in color. [M LCD/VF Setup] [LCD/VF B&W] [Off] Operating modes: 1 Open the [LCD/VF B&W] submenu. [M LCD/VF Setup] [LCD/VF B&W] 2 Select [On] and then press SET.
Preparing the Camcorder Removing and Attaching the Terminal Covers Remove the covers for the following terminals in order to access them. • HD/SD SDI and GENLOCK/TC terminals* • W (headphone), AV and DC IN terminals • REMOTE terminal • HD/SD COMPONENT OUT, USB and HDMI OUT terminals 33 * b only. Removing the Terminal Covers 1 Open the terminal cover. 2 Grasp the strip connecting the terminal cover to the camcorder and pull straight out.
Preparing the Camcorder Using the Wireless Controller to Operate the Camcorder 34 When using the wireless controller, point it at the camcorder’s remote sensor. When the wireless controller's buttons are operated, the camcorder's tally lamps will illuminate. NOTES • When you use the START/STOP button or ZOOM buttons on the wireless controller, you must press the record enable button simultaneously with the desired button.
Preparing Recording Media Preparing Recording Media The camcorder records clips to CompactFlash (CF) cards and photos* to SD and SDHC memory cards. The camcorder is equipped with two CF card slots. Initialize recording media (0 37) when you use them with this camcorder for the first time. * The camcorder can record custom picture settings (0 101) and camera settings (0 109) on to an SD card.
Preparing Recording Media Checking the Status of the CF Card Slots You can check the status of the CF card slots immediately by looking at the CFj/CFl access indicator. Refer to the following table. 36 Access indicator color CF card slot status Red Accessing CF card. Green Recording/playback is possible and the CF card slot is selected for recording/playback. Indicator off A CF card is not inserted, the CF card slot is not currently selected, or the CF card is not being accessed.
Preparing Recording Media Inserting and Removing an SD Card 1 Turn off the camcorder (햲). 2 Open the SD card slot cover. 37 3 Insert the SD card straight, with the label facing the grip belt, all the way into the SD card slot until it clicks (햳). 4 Close the SD card slot cover (햴). • Do not force the cover closed if the SD card is not correctly inserted. IMPORTANT • Observe the following precautions while the SD card access indicator is flashing. Failure to do so may result in permanent data loss.
Preparing Recording Media 4 Select [OK] and then press SET. • If you are using the [Complete] initialization option, press SET to cancel the operation while it is in progress. You can use the SD card but all data will be erased. 38 5 When the confirmation message appears, press SET. • The SD card is initialized and all the data it contains is erased.
Preparing Recording Media To use relay recording [J Other Functions] By default, this function is activated. If it has been deactivated, follow the procedure below to activate it. [Relay Rec] 1 Open the [Relay Rec] submenu. [J Other Functions] [On] [Relay Rec] 2 Select [On] and then press SET. To use double slot recording 1 Open the [Double Slot Rec] submenu. [J Other Functions] [Double Slot Rec] [J Other Functions] [Double Slot Rec] 2 Select [On] and then press SET.
3 Recording 40 Recording Video This section explains the recording basics. Before you begin recording, make a test recording first to check if the camcorder operates correctly. Record for approximately 6 minutes at 50 Mbps (0 46). Should the camcorder fail to operate correctly, refer to Troubleshooting (0 162). For details on recording audio, refer to Recording Audio (0 77). Operating modes: Preparing to Record Lens cap Viewfinder 1 Attach a charged battery pack to the camcorder (0 23).
Recording Video 2 Press the START/STOP button to begin recording. • Recording starts. The front and rear tally lamps illuminate and the recording indicator [NREC] appears on the screen. • You can use the START/STOP button on the side grip or handle. • When you use the wireless controller, press the START/STOP button and the record enable button simultaneously. 3 Press the START/STOP button to pause the recording. • The clip* is recorded to the CF card and the camcorder enters record pause mode.
Recording Video Recording in Full Auto Mode 42 Move the CAMERA switch to FULL AUTO to change the camcorder to full auto mode. In full auto mode, the camcorder automatically sets the iris, gain, shutter speed, and white balance. The camcorder will continuously adjust the brightness and white balance automatically*. In full auto mode, however, the autofocus will not be turned on.
Recording Video Onscreen Displays Refer to this section for an explanation of the various screen displays that appear in mode. You can use the custom display function (0 108) to display or hide most of the screen displays. Such screen displays are denoted with an asterisk (*).
Recording Video 44 NOTES • You can press the DISP. button to turn off most icons and displays. • When the A icon appears next to the white balance, aperture value, gain or shutter speed, it indicates that the setting is in auto mode. 1 Remaining battery time • The icon shows a rough estimate of the remaining charge as a percentage of the full charge of the battery pack. The remaining recording/playback time of the battery pack is displayed, in minutes, next to the icon. • P Q R S U (in red).
Recording Video Power Save Mode Activate the power save mode to turn off the screen and reduce battery consumption. At the press of a button, the camcorder will immediately return to record pause mode. 1 Hold the POWER SAVE button pressed down for at least 2 seconds. • The screen will turn off and the ON/OFF indicator will illuminate in orange. • During power save mode, the tally lamps will flash twice approximately every 3 seconds. The camcorder retains previous time code and camcorder settings.
Video Configuration: Bit Rate, Resolution and Frame Rate Video Configuration: Bit Rate, Resolution and Frame Rate 46 Before you record, select the bit rate, resolution (frame size) and frame rate that best match your creative needs. [J Other Functions] Operating modes: [Bit Rate/Resolution] 1 Open the [Bit Rate/Resolution] submenu to set the bit rate and resolution. [50 Mbps 1920x1080] [J Other Functions] [Bit Rate/Resolution] [J Other Functions] 2 Select the desired option and then press SET.
Custom Button and Dial Custom Button and Dial You can assign to the CUSTOM button and dial one of several frequently used functions. You can then adjust the selected function using the CUSTOM button and dial, without having to access the menu. The functions that can be assigned to the CUSTOM button differ depending on whether the camcorder is in Infrared mode. [J Other Functions] [Custom Key/Dial] Operating modes: 1 Open the [Custom Key/Dial] submenu.
Adjusting the Focus Adjusting the Focus This camcorder features the following two methods for adjusting the focus. 48 Manual focus (MF): Use the manual ring to adjust the focus. You can use the peaking and magnification functions to help you focus more accurately. Autofocus (AF): The camcorder continuously adjusts the focus automatically. When using autofocus, you can select Instant AF, Medium AF or Normal AF mode. You can also use the manual ring.
Adjusting the Focus NOTES • Using the subject distance display on the screen: - When the camcorder switches out of autofocus mode or when you adjust the focus with the manual ring, the approximate subject distance is displayed on the screen for approximately 3 seconds. - Use the subject distance display as an estimate; when the distance reading is not considered very precise for a particular zoom range, it will be displayed in gray. - [f] indicates infinity focus and [f–] indicates over infinity focus.
Adjusting the Focus Magnification Press the MAGN. button. 50 • i appears on the bottom of the screen and the center of the screen is magnified approximately 2 times*. • Press the button again to cancel the function. * The magnification that appears on the LCD screen and on the viewfinder screen is different. The magnification also differs based on the video configuration. NOTES • Magnification appears only on the camcorder screen. It will not appear on an external monitor connected to the camcorder.
Adjusting the Focus Options [Instant]: [Medium]: [Normal]: Sets the autofocus mode to Instant AF. The focus is adjusted at the highest speed. This mode is useful even when recording in very bright or low-light surroundings. This mode uses both the TTL system and external sensor for focusing. Sets the autofocus mode to Medium AF. The camcorder focuses more smoothly on the subject than when using the [Instant] setting. Sets the autofocus mode to Normal AF.
Adjusting the Focus Options [Face Pri.]8: 52 This sets the camcorder to face priority autofocus. If the camcorder detects the subject’s face, the camcorder focuses on and tracks it. When there is no face detected, the camcorder focuses on the subject at the center of the screen. [Face Only]9: If the camcorder detects the subject’s face, the camcorder focuses on and tracks it. Unlike the [Face Pri.] setting, when there is no face detected, the camcorder is set to manual focus.
Image Stabilizer Image Stabilizer Use the image stabilizer to compensate for camcorder shake in order to achieve steadier shots. There are 3 methods of image stabilization; select the method that best suits your needs. Dynamic IS P: Dynamic IS compensates for a higher degree of camcorder shake, such as when shooting while walking, and is more effective as the zoom approaches full wide angle. [l Camera Setup] [OIS Functions] [Img Stab.
Gain Gain The gain control adjusts the level of the video signal generated depending on the lighting and shooting conditions. You can select automatic or manual gain control. 54 Operating modes: Automatic Gain Control (AGC) The camcorder automatically adjusts the gain based on the subject’s brightness. If manual gain control is activated, follow the procedure below to activate automatic gain control. Press the GAIN button repeatedly until the A icon appears next to the gain value on the screen.
Gain Manual Gain Control You can manually adjust the gain of the 3 preset gain levels (L: low, M: middle, H: high). Each level can be set independently. You can also fine-tune the gain in 0.5 dB increments. 55 Assigning Gain Values [l Camera Setup] You can assign separate gain values to the L, M and H preset levels. Then, you can activate the desired gain level using the GAIN button. [Gain] 1 Open the [Gain] submenu. [l Camera Setup] [Gain] [L 0.0 dB] [M 6.0 dB] [H 12.
Shutter Speed Shutter Speed Set the shutter speed based on the recording conditions. For example, you may want to set slower shutter speeds in darker environments. The camcorder offers the following 6 modes. 56 Operating modes: Off: The camcorder uses a standard shutter speed based on the frame rate. Automatic ([Automatic]): The camcorder automatically adjusts the shutter speed based on the picture’s brightness. This mode is not available during slow & fast motion recording mode.
Shutter Speed Changing the Shutter Speed Mode [l Camera Setup] 1 Open the [Shutter] submenu. [l Camera Setup] [Shutter] [Shutter] 2 Select the desired mode and then press SET. 3 Close the menu and then press the SHUTTER button. [Automatic] • If you selected [Automatic], the shutter speed mode is set to automatic and you do not need to perform the rest of the procedure. • The shutter speed on the screen appears highlighted in orange. 4 Use the joystick to adjust the shutter speed.
Adjusting the Aperture Adjusting the Aperture 58 You can affect the brightness of your recordings or change the depth of field by adjusting the aperture. Increase the aperture value (F8) so that objects that are close and far away will be in focus. You can have the camcorder adjust the aperture automatically or you can manually adjust it to give you more control over your recording.
Adjusting the Aperture • When you set the aperture value manually, it is not retained if you activate automatic aperture control (excluding full auto mode). The aperture value set automatically by the camcorder will be retained when you switch back to manual aperture control. • If the built-in ND filter is activated, the picture may become dark when you set a high aperture value. In such case, set the ND filter to [Off] and readjust the aperture. • You can use the [J Other Functions] [Custom Function] [I.
White Balance White Balance The camcorder uses an electronic white balance process to calibrate the picture for accurate color display under different lighting conditions. There are 4 methods of setting the white balance. 60 Auto white balance: The camcorder automatically adjusts the white balance to the optimal level. Preset white balance: Set the white balance to either [Daylight] (5,400 K) or [Tungsten] (3,200 K).
White Balance 3 Close the menu and then press the WB button. • Press the button repeatedly until the icon of the desired setting appears in the lower left of the screen. Options [Daylight] H: Suitable for recording scenes such as sunrises/sunsets, fireworks or night scenes. [Tungsten] I: Suitable for recording scenes such as at a party with changing lighting conditions or scenes under studio lighting or sodium lamps. [Kelvin]: Allows you to set the color temperature value (0 61).
White Balance Custom White Balance You can store two custom white balance settings in the camcorder for future use. 62 1 Press the WB button to select the F A or F B custom setting. • The F A or F B appears next to the color temperature on the screen. If another icon appears or no icon appears, press the button again until the desired icon appears. 2 Point the camcorder at a white object so that it fills the whole screen. • Use the same lighting conditions you plan to use when recording.
Zooming Zooming You can operate the zoom (up to 10x) using the zoom rocker on the side grip or the one on the handle. You can also use the manual ring or the zoom buttons on the wireless controller. For zooms with a gradual start and/or stop, use soft zoom control (0 66). You can also use the [l Camera Setup] [Tele-converter] setting to increase the focal length by a factor of approximately 1.5, 3 or 6.
Zooming Using the Grip Zoom Rocker 64 Use the functions in the [l Camera Setup] [Zoom] submenus to set the zoom speed. When you select a constant zoom speed, set one of 16 constant speeds (1 is the slowest, 16 the fastest). With a variable zoom speed, press gently for a slow zoom; press harder for faster zooms. Move the zoom rocker toward Q to zoom out (wide-angle) and toward P to zoom in (telephoto).
Zooming Using the Handle Zoom Rocker Use the functions in the [l Camera Setup] the zoom speed. [Zoom] submenus to set 65 Move the zoom rocker toward Q to zoom out (wide-angle) and toward P to zoom in (telephoto). Setting the Zoom Speed Refer to the following table for approximate zoom speeds of the entire zoom range (end to end). 1 Open the zoom [Speed Level] submenu. [l Camera Setup] [Zoom] [Speed Level] [l Camera Setup] [Zoom] [Speed Level] 2 Select [Fast], [Normal] or [Slow] and then press SET.
Zooming 66 Setting the Zoom Speed Perform the following procedure to set the zoom speed for the supplied wireless controller. Refer to the following table for a summary of zoom speeds when using the wireless controller or other remote controls. [l Camera Setup] [Zoom] [Speed Level] 1 Open the zoom [Speed Level] submenu. [l Camera Setup] [Zoom] [Speed Level] 2 Select [Fast], [Normal] or [Slow] and then press SET. 3 Open the zoom [Wireless Controller] submenu.
Using Optional Conversion Lenses Using Optional Conversion Lenses Attaching the optional TL-H58 Tele-converter increases the focal length of the camcorder by a factor of approximately 1.5. Attaching the optional WD-H58W Wide-converter decreases the focal length by a factor of approximately 0.8. When you attach a conversion lens, perform the procedure below to optimize the autofocus and minimum object distance for the particular lens.
Onscreen Markers and Zebra Patterns Onscreen Markers and Zebra Patterns 68 Using onscreen markers allows you to make sure your subject is correctly framed and is within the appropriate safe area. The zebra patterns help you identify areas that are overexposed. The onscreen markers and zebra pattern will not affect your recordings.
Onscreen Markers and Zebra Patterns Options [Center]: [Horizontal]: [Grid]: [Safety Zone]: Displays a small marker that indicates the center of the screen. Displays a horizontal line to help you compose level shots. Displays a grid that allows you to frame your shots correctly (horizontally and vertically). Displays indicators that show various safe areas, such as the action safe area and text safe area. Available options for [Safety Zone Area] are [95%], [92.5%], [90%] and [80%].
Setting the Time Code Setting the Time Code 70 The camcorder can generate a time code signal and embed it in your recordings. You can have the camcorder output the time code signal from the HD/SD SDI terminal (b only) or GENLOCK/TC terminal (b only; 0 75). In addition, you can superimpose the time code on video output from the HDMI OUT terminal, HD/SD COMPONENT OUT terminal or AV terminal. You can also select between a drop frame and non-drop frame time code.
Setting the Time Code 4 Change the rest of the fields (minutes, seconds, frame) in the same way. • Press the CANCEL button to close the screen without setting the time code. 5 Select [Set] to close the screen. • If the running mode is set to [Free Run], the time code will start running immediately. Selecting Drop or Non-Drop Frame You can select between a drop frame (DF) or non-drop frame (NDF) time code, depending on how you plan to use your recording.
Setting the Time Code 72 NOTES • When the [J Other Functions] [Frame Rate] setting is set to [24P], the frames value in the time code runs from 0 to 23. For other settings, it runs from 0 to 29. • b When the [J Other Functions] [Frame Rate] setting is set to [24P], the frames value in the time code signal output from the HD/ SD SDI terminal or GENLOCK/TC terminal runs from 0 to 29.
Setting the User Bit Setting the User Bit The user bit display can be selected from the date or the time of recording, or an identification code consisting of 8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the letters A to F. b If user bit information is being received along with an external time code, you can also record the external user bit on the recording media.
b Synchronizing with an External Device b Synchronizing with an External Device 74 Using genlock synchronization, you can synchronize this camcorder's video signal to that of an external video device. Similarly, using an external time code signal, you can synchronize this camcorder's time code to the external signal. Using the external time code signal with multiple cameras allows you to set up a multi-camera recording.
b Synchronizing with an External Device 1 Open the [Genlock/TC Term.] submenu. [J Other Functions] [Genlock/TC Term.] 2 Select [Gen/TC In] and then press SET. Recording the User Bit of an External Signal The user bit of an external time code signal can also be recorded with the time code itself. 1 Open the user bit [Rec Mode] submenu. [L TC/UB Setup] [User Bit] [Rec Mode] 2 Select [External] and then press SET.
b Synchronizing with an External Device 76 NOTES • The user bit of the time code signal is output while the camcorder is recording in mode or during playback of a clip in mode. When the [J Other Functions] [Frame Rate] setting is set to [24P] and the [L TC/UB Setup] [User Bit] [Output Mode] setting is set to [Pulldown], the user bit will be 2:3 pulldown data. In other words, when a recording in 24P mode is output from the HD/SD SDI terminal, the signal is converted to 60i using the 2:3 pulldown method.
Recording Audio Recording Audio The camcorder features two-channel linear PCM audio recording and playback with a sampling frequency of 48 kHz. You can record audio using the built-in microphone, optional external microphone (XLR or MIC terminal) or line input (XLR terminal). You can select the audio input independently for channel 1 and channel 2.
Recording Audio Activating the Microphone Attenuator 78 [m Audio Setup] If the audio level is too high and the sound sounds distorted when recording with the built-in microphone or a microphone connected to the MIC terminal, activate the microphone attenuator (12 dB for the built-in microphone, 20 dB for an external microphone). 1 Open the [Int. Mic Att.] submenu. [m Audio Setup] [Audio Input] [Int. Mic Att.] [Audio Input] [Int. Mic Att.] [Off] 2 Select [On] and then press SET.
Recording Audio Switching Between External Microphone and Line Input XLR terminal switches 1 Set the AUDIO IN switch of the desired channel to EXT. 2 Set the XLR terminal switch of the desired channel to LINE or MIC. • To supply a microphone with phantom power, set the switch to MIC+48V instead. Make sure to connect the microphone first, before turning the phantom power on. Keep the microphone connected when turning off the phantom power.
Recording Audio Activating the Microphone Attenuator You can activate the external microphone’s attenuator (20 dB) if the XLR terminal switch is set to MIC or MIC+48V. 80 1 Open the desired XLR terminal’s microphone attenuator submenu. [m Audio Setup] [Audio Input] [XLR1 Mic Att.] or [XLR2 Mic Att.] 2 Select [On] and then press SET. [m Audio Setup] [Audio Input] [XLR1 Mic Att.] [XLR2 Mic Att.
Recording Audio CH1/CH2 audio level dials Manual Audio Level Adjustment You can set the audio level for each channel manually from -f to 18 dB. 1 Set the audio level switch of the desired channel to M. 2 Turn the corresponding audio level dial to adjust the audio level. • For reference, the 0 corresponds to -f, 5 corresponds to 0 dB, and 10 corresponds to +18 dB.
Using Metadata Using Metadata 82 The camcorder automatically adds metadata to clips while they are being recorded. Metadata consists of the user-defined user memo* and recording data, such as shutter speed, exposure and focus settings. You can use the supplied Canon XF Utility software to check and search for specific metadata.
Color Bars/Audio Reference Signal Color Bars/Audio Reference Signal You can have the camcorder generate and record color bars and a 1 kHz audio reference signal and output them from the HD/SD SDI terminal (b only), HDMI OUT terminal, HD/SD COMPONENT OUT terminal1, AV terminal and W (headphone) terminal2. 1 2 Outputs color bars only. Outputs audio reference signal only.
Video Scopes Video Scopes 84 The camcorder can display a simplified waveform monitor. It can also display an edge monitor* to help you focus. The video scopes appear only on the LCD screen. They do not appear in the viewfinder or on an external monitor. * The edge monitor looks at the focus of the entire picture and displays the results as a waveform. The edge monitor is available only in mode. Operating modes: Displaying a Video Scope Press the WFM button.
Video Scopes Configuring the Edge Monitor [J Other Functions] Using this video scope allows you to focus with more precision when the camcorder is in manual focus mode. The edge monitor features 2 modes. 1 Open the [Edge Monitor] submenu. [J Other Functions] [WFM (LCD)] [Edge Monitor] 2 Select the desired option and then press SET. Options [Type 1]: [Type 2]: The waveform that represents the focus of the entire picture is displayed in green.
Adding Shot Marks while Recording Adding Shot Marks while Recording 86 When recording, you can flag an important shot in a clip by adding a “shot mark” (n). There are two types of shot marks, shot mark 1 (c) and shot mark 2 (d), and you can add either or both types to a single clip. When the camcorder is in mode, you can add or delete shot marks (0 122). You can also display an index screen of all the shot marks (0 121), allowing you to find a particular scene in a clip more quickly.
Reviewing a Recording Reviewing a Recording When the camcorder is in was recorded. mode, you can review the last clip that Operating modes: [Rec Review] 1 Open the [Rec Review] submenu to set the review length. [J Other Functions] [J Other Functions] [Entire Clip] [Rec Review] 2 Select the desired option and then press SET. 3 After you finish recording, press the U button. • The last clip that was recorded is played back without audio for the selected duration.
Special Recording Modes Special Recording Modes The camcorder features 4 special recording modes. 88 Interval recording ([Interval Rec]): The camcorder will automatically record a pre-defined number of frames at a pre-defined interval. This mode is suitable for recording subjects with little movement, such as natural surroundings or plants. Frame recording ([Frame Rec]): The camcorder will record a pre-defined number of frames every time you press the START/STOP button.
Special Recording Modes 4 Press the START/STOP button again to stop recording. • All of the recorded frames are joined together into one clip. • The tally lamps go out and [INT STBY] appears at the top of the screen (with [INT] flashing). • • • • • • NOTES You can use only one special recording mode at a time. While recording, you cannot change the interval or number of frames. Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
Special Recording Modes 90 NOTES You can use only one special recording mode at a time. While recording, you cannot change the number of frames. Some frames at the point the recording was stopped may be recorded and added to the end of the clip. Frame recording mode will be deactivated if the special recording mode is changed or turned off. It will be deactivated also if you change the [J Other Functions] [Bit Rate/Resolution] or [Frame Rate] setting.
Special Recording Modes 3 Press the START/STOP button to begin recording. • The camcorder automatically records at the set frame rate. • The tally lamps illuminate. • [S&F STBY] changes to [N S&F REC] while recording. 91 4 Press the START/STOP button again to stop recording. • The camcorder records the clip. • The tally lamps go out and [S&F STBY] appears at the top of the screen. NOTES • You can use only one special recording mode at a time.
Special Recording Modes 92 NOTES • You can use only one special recording mode at a time. • Pre-recording mode will be deactivated if the special recording mode is changed or turned off. It will be deactivated also if you change the video configuration. • During pre-recording mode, the time code will be recorded with the running mode (0 70) set to [Free Run], regardless of the previous setting. Alternatively, you can use an external time code signal (b only).
Infrared Recording Infrared Recording This camcorder features the ability to shoot movies in dark surroundings using the camcorder's infrared light and other sources of infrared light. Also, you can select whether the lighter areas of the picture appear in green or white. Operating modes: Activating Infrared Mode Follow the procedure below to set the camcorder to Infrared mode and to set the color of highlights in the picture. 1 Move the INFRARED switch to ON.
Infrared Recording 94 NOTES • When the camcorder is in Infrared mode, the following adjustments are made automatically. - Gain, shutter speed and aperture are set to auto. - Autofocus is set to [Normal AF]. - Light metering, AE level, AGC limit, white balance and custom picture cannot be set. - ND filter cannot be activated. • When switching the camcorder to Infrared mode, do not point the lens at strong sources of light or heat.
Optical Axis Shift Optical Axis Shift This function aids in a dual camera setup for 3D recording by allowing you to adjust the position of the image stabilization lens. 95 Operating modes: 1 Open the [OIS Functions] submenu. [l Camera Setup] [OIS Functions] 2 Select [Axis Shift] and then press SET. [l Camera Setup] [OIS Functions] • Y appears on the bottom of the screen. 3 Open the optical axis [Adjust] screen. [l Camera Setup] [Axis Shift] [Img Stab.
Using the Focal Length Guide Using the Focal Length Guide 96 The focal length guide aids you when using two camcorders for 3D recording. The guide appears as a numerical value and has a range of 154 steps. You can set the guide to 0 at any point in the zoom range to help precisely calibrate both camcorders. Operating modes: 1 Set up two camcorders and align their picture angle. [l Camera Setup] 2 Open the [Focal Length Guide] submenu.
4 Customization 97 Assignable Buttons The camcorder conveniently features 10* buttons to which you can assign various functions. By assigning oftenused functions, you can quickly access them with a single press of a button. * In mode, only assignable buttons 1 to 4 are available. Operating modes: Changing the Assigned Function [J Other Functions] 1 Open the [Assign Button] submenu. [J Other Functions] [Assign Button] [Assign Button] 2 Select the button to change and then press SET.
Assignable Buttons Function name 98 0 Description [Img Stab.] Turns the selected image stabilization method (Dynamic IS or Standard IS) on/off. N – 53 [Powered IS] Turns Powered IS on/off. N – 53 [Focus Limit] Turns the focus limit on/off. N – 52 [Face AF] Toggles the autofocusing between [Face Pri.], [Face Only] and [Off]. N – 51 [Select Face] Selects the main subject when using [Face AF] to focus on subjects’ faces.
Custom Picture Settings Custom Picture Settings You can preset a number of picture-related settings. After changing individual settings to your preference, you can save the whole set in the camcorder or SD card as a custom picture file. You can then load the file at a later date to change the current settings to the preset levels you selected. You can even embed the custom picture settings in clips recorded to a CF card or photos recorded to an SD card.
Custom Picture Settings Preset Custom Picture Files 100 By default, the custom picture files in the camcorder in file slots [C7] to [C9] are protected. Remove the protection (0 100) to edit the file. The following describes when to use the preset files. [C7 VIDEO.C]: For playing back video on consumer flat-panel displays. [C8 CINE.V]: For achieving a cinema-like picture on TV monitors, such as when creating TV programs that require a cinema-like effect. [C9 CINE.
Custom Picture Settings Transferring Custom Picture Files You can transfer custom picture files between the camcorder and SD card. When the custom picture file is in the camcorder, use [Copy To b] or [Load From b] depending on the operation you wish to perform. Similarly, when the custom picture file is on an SD card, use [Copy To Cam.] or [Load From Cam]. Copying a File from the Camcorder to an SD Card 1 After selecting a file in the camcorder, open the [Copy To b] submenu.
Custom Picture Settings NOTES • You can also copy a custom picture file embedded in a clip to the camcorder (0 121). 102 Embedding Custom Picture Settings in a Recording You can record video or take a photo with your custom picture settings applied to it. Later, those embedded settings in the video or photo can be copied to the camcorder (0 143) and be applied to future recordings.
Custom Picture Settings Master Black Corrects color cast in blacks. [Red]: -50 to 50 (Default: 0) [Green]: -50 to 50 (Default: 0) [Blue]: -50 to 50 (Default: 0) 103 Black Gamma Output Black Gamma Controls the lower part of the gamma curve (dark areas of the image). [Level]: Raises or lowers the lower part of the gamma curve. This setting can be adjusted from -50 to 50. (Default: 0) [Range]: Selects the range in which dark areas are affected. This setting can be adjusted from -5 to 50.
Custom Picture Settings Sharpness 104 Sets the sharpness of the output and recording signal. [Level]: Sets the sharpness level. This setting can be adjusted from -10 to 50. (Default: 0) [H Detail Freq.]: Sets the center frequency of horizontal sharpness. Setting higher values increases the frequency, which, in turn, increases the sharpness. This setting can be adjusted from -8 to 8. (Default: 0) [Coring]: Reduces noise artifacts caused by high sharpness levels. [Level]: Sets the coring level.
Custom Picture Settings [Chroma]: [Area]: [Y Level]: Adjusts the color saturation for detection of skin tones. This setting can be adjusted from 0 to 31. (Default: 16) Adjusts the color range for detection of skin tones. This setting can be adjusted from 0 to 31. (Default: 16) Adjusts the brightness for detection of skin tones. This setting can be adjusted from 0 to 31.
Custom Picture Settings Color Correction 106 The camcorder detects the characteristics of a certain color (color phase, chroma, area and Y level) and corrects them when recording. You can set the color correction for up to two different areas (A and B). [Select Area]: Selects the area or areas to correct. Available options are [Area A], [Area B] and [Area A&B]. Select [Off] to turn this setting off. (Default: [Off]) [Area A Setting]: Determines the area in which colors will be corrected.
Customizing Functions and Onscreen Displays Customizing Functions and Onscreen Displays Customize the camcorder to match your shooting style and needs. Use the [J Other Functions] [Custom Function] setting to adjust how some of the camcorder’s controls and functions operate in mode. Similarly, use the [M LCD/VF Setup] [Custom Display] setting to customize the onscreen displays that appear during recording.
Customizing Functions and Onscreen Displays Customizing Onscreen Displays 108 By customizing onscreen displays, you can choose to have the camcorder display some icons while hiding other ones. For details on which onscreen displays can be customized, refer to Onscreen Displays (0 43). For details on the setting options, refer to [Custom Display 1] (0 150) and [Custom Display 2] (0 150). Operating modes: 1 Open the [Custom Display 1] or [Custom Display 2] submenu.
Saving and Loading Camera Settings Saving and Loading Camera Settings After you adjust settings in the menus, you can save those settings on an SD card. You can load those settings at a later date or on another XF105 or XF100 camcorder so that you can use that camcorder in the same exact way. Operating modes: Saving Camera Settings to an SD Card 1 Open the [Save To b] submenu. [J Other Functions] [Transfer Menu] [Save To b] [J Other Functions] [Transfer Menu] 2 Select [OK] and press SET.
5 Playback 110 Playback This section explains how to play back clips recorded on a CF card. For details on playing back clips using an external monitor, refer to Connecting to an External Monitor (0 126). For details on viewing photos on the SD card, refer to Viewing Photos (0 140). Operating modes: Clip Index Screen Playback functions are accessed from the clip index screen. To open the clip index screen, set the camcorder to mode.
Playback Hold down the button on the d switch and move it to MEDIA. • The camcorder switches to mode and the clip index screen appears. 2 1 111 3 4 5 6 7 16 15 14 8 9 10 1 2 3 4 5 6 7 8 Currently selected CF card slot (0 38) Clip thumbnail (0 123) Relay recording: Appears when a clip begins on one CF card and continues on the other.
Playback Switching to Other Index Screens 112 All of the clips on a CF card can be accessed from the clip index screen. However, you can switch to other index screens that show only clips with an e mark ([e Mark] index screen), clips with a Z mark ([Z Mark] index screen), or photos* ([Photos] index screen). * Photos are saved on the SD card. 1 Press the INDEX button. • The index screen selection menu appears. 2 Select the desired index screen and then press SET. • The selected index screen appears.
Playback Onscreen Displays 1 2 3 4 5 113 6 7 8 9 10 11 12 13 19 18 17 16 15 1 2 3 4 5 6 7 8 9 10 1 2 Remaining battery time (0 44) Playback operation Selected CF card Relay recording Time code (0 70) Clip number / Total number of clips Bit rate and resolution (0 46) Frame rate (0 46) Embedded custom picture file (0 99) Output displays (0 128) Appears when [M LCD/VF Setup] Appears when [M LCD/VF Setup] [Metadata Display] [Metadata Display] 11 12 13 14 15 16 17 18 19 14 Wireless controller (0 150
Playback Playback Controls 114 When you play back a clip, operate the buttons on the camcorder or the wireless controller to use fast playback, play back frame-by-frame or skip clips. Refer to the following table. Available Playback Types Playback type Operation Fast playback Camcorder: Press the J or I button. Wireless controller: Press the J or I button. Repeat to increase the playback speed to approximately 5x J 15x J 60x the normal speed.
Playback Adjusting the Built-in Speaker Volume 1 Open the [Speaker Volume] submenu. [m Audio Setup] [Audio Output] [Speaker Volume] 2 Select the desired level and then press SET. • Select [Off] to mute the audio. NOTES • For details on changing the audio channel, refer to Selecting the Audio Channel (0 129). [m Audio Setup] [Audio Output] [Speaker Volume] [8] Adding Shot Marks during Playback You can add an c mark, d mark or both marks to a clip during playback or playback pause.
Clip Operations Clip Operations 116 Besides playing back a clip, you can perform other operations such as deleting a clip or displaying clip information. This is done through the clip menu, which contains different functions depending on the index screen. You can use the functions in the [J Other Functions] menu to perform some of the operations on all the clips. Refer to the following table for available functions and refer to the following pages for more details of the functions.
Clip Operations Using the Clip Menu 1 Select a clip and then press SET. • The clip menu appears. Available functions depend on the index screen and which functions are enabled. 117 2 Select the desired function and then press SET. • The function is enabled. For some functions, further action may be required. Follow the onscreen directions. • Press the CANCEL button instead to return to the clip index screen.
Clip Operations Adding e Marks or Z Marks 118 If you add an OK mark (e) or check mark (Z) to a clip, you can later display an index screen that shows only the clips with an e mark or only the clips with a Z mark. Furthermore, you cannot delete clips with an e mark so you can use it to protect important clips. 1 Select the desired clip and then press SET to open the clip menu. 2 Select [Add e Mark] or [Add Z Mark] and then press SET.
Clip Operations Copying Clips You can copy clips from one CF card to the other. The copied clips will retain their original name. 119 Copying a Single Clip 1 Select the desired clip and then press SET to open the clip menu. 2 Select [Copy Clip] and then press SET. • The clip information screen appears and it prompts you to confirm the operation. 3 Select [OK] and then press SET. • Select [Cancel] instead to cancel the operation. • While the clip is being copied, you can press SET to cancel.
Clip Operations Deleting Clips You can delete any clip except those with an e mark. To delete such clips, delete the e mark beforehand. 120 Deleting a Single Clip 1 Select the desired clip and then press SET to open the clip menu. 2 Select [Delete Clip] and then press SET. • The clip information screen appears and it prompts you to confirm the operation. 3 Select [OK] and then press SET. • Select [Cancel] instead to cancel the operation.
Clip Operations Copying a Custom Picture File Embedded in a Clip You can copy the custom picture file embedded in a clip to the camcorder. 1 Select the desired clip and then press SET to open the clip menu. 2 Select [Copy X File] and then press SET. • The [X Data 1/3] screen appears with the orange selection frame indicating the first custom picture file slot in the camcorder. • You can push the joystick up/down to display the [X Data 2/3] and [X Data 3/3] screens.
Clip Operations Displaying a Frame Index Screen of a Single Clip 122 You can display an index screen of a single clip broken down as frames at fixed intervals. This is useful when you have a long clip or wish to play back a clip from a certain point. You can change how many thumbnails are displayed. You can also perform other operations from this index screen, such as adding and deleting shot marks. 1 Select the desired clip and then press SET to open the clip menu.
Clip Operations Deleting a Shot Mark 1 Open the [Shot Mark] index screen or [Expand Clip] index screen. 2 Select the desired frame (thumbnail) and then press SET to open the clip menu. 3 Select [Del. Shot Mark 1] or [Del. Shot Mark 2] and then press SET. • The clip information screen appears and it prompts you to confirm the operation. 4 Select [OK] and then press SET. • The selected mark is deleted and the screen changes back to the previous index screen.
6 External Connections 124 Video Output Configuration The video signal output from the HD/SD SDI (b only), HDMI OUT and HD/SD COMPONENT OUT terminals depends on the clip’s video configuration, the capability of the external monitor (for video output from the HDMI OUT terminal) and on various menu settings. Video output from the AV terminal will always be in 480/ 60i standard.
Video Output Configuration SD Output When HD video (16:9 aspect ratio) is converted and output as SD video (4:3 aspect ratio), you can choose how it appears on the external monitor. [N Video Setup] [SD Output] 1 Open the [SD Output] submenu. [N Video Setup] [Squeeze] [SD Output] 2 Select the desired option and then press SET. Options [Squeeze]: [Letterbox]: [Side Crop]: The image is squeezed from the left and right so that the entire image fits within the screen.
Connecting to an External Monitor Connecting to an External Monitor 126 When you connect the camcorder to an external monitor for recording or playback, use the terminal on camcorder that matches the one you wish to use on the monitor. Then, select the video signal output configuration (0 124). The camcorder can output video from all of the video output terminals simultaneously.
Connecting to an External Monitor b Using the HD/SD SDI Terminal The digital signal output from the HD/SD SDI terminal includes the video signal, audio signal and time code signal. If necessary, perform the following procedure to change the output to HD or SD. Turning the output off will conserve the camcorder’s power. [N Video Setup] [SDI Output] [Off] 1 Open the [SDI Output] submenu. [N Video Setup] [SDI Output] 2 Select the desired option and then press SET.
Connecting to an External Monitor Using the AV Terminal When you output video from the AV terminal, the video signal is converted to an analog SD composite video signal. In addition, the AV terminal also outputs audio. You can select the SD output method (0 125). 128 NOTES • If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor (0 128).
Audio Output Audio Output The camcorder can output audio from the HD/SD SDI terminal (b only), HDMI OUT terminal, AV terminal or W (headphone) terminal. When audio is output from the AV terminal or W (headphone) terminal, you can configure settings such as the output channel. When audio is output from the AV terminal, you can select the output level. b Embedded Audio Embedded audio refers to the superimposing of the audio signal along with the video signal being output from the HD/SD SDI terminal.
Audio Output Options [CH1/CH2]: 130 [CH1/CH1]: [CH2/CH2]: [All/All]: Audio from CH1 is output from the left audio channel and audio from CH2 is output from the right audio channel. Audio from CH1 is output from both the left and right audio channels. Audio from CH2 is output from both the left and right audio channels. Audio from CH1 and CH2 is mixed and output from both the left and right audio channels.
Saving Clips to a Computer Saving Clips to a Computer Use the software on the supplied Canon XF Utilities CD-ROM to transfer clips in the camcorder to a computer to save them. The CD-ROM contains the following. 131 Canon XF Utility: Browser for transferring clips to a computer, playing back and checking video, and managing clips. Plugins for non-linear editing (NLE) software: The plugins allow you to load clips from a computer or a CF card (connected via USB reader to a computer) to the NLE software.
Saving Clips to a Computer Installing and Uninstalling Canon XF Utility (Windows) Installing Canon XF Utility 132 Perform the following procedure to install the Canon XF Utility software. Note that the language displayed during installation will be in English, French or Spanish but the rest of the application’s menus and messages will be in English only. 1 Insert the Canon XF Utilities CD-ROM into the computer. • The installation screen appears. If it does not, follow the steps below.
Saving Clips to a Computer 4 Select an installation method and then click [OK]. • If you selected the [Easy Installation] installation method, skip to step 7. 133 5 Select the software to install and the destination folder. Then, click [Next]. 6 Click [Install]. 7 Read the license agreement and click [Yes] to begin the installation. • If you do not select [Yes], you cannot install the software. • When the installation has completed, [Installation has completed successfully.] appears.
Saving Clips to a Computer 2 Click [Yes] to begin the uninstalling the software. • When the software has been uninstalled, [The software has been successfully uninstalled] appears. 3 Click [OK]. 134 Uninstalling Canon XF MPEG2 Decoder 1 In the Control Panel, open [Programs and Features]* (Windows Vista/Windows 7) or [Add or Remove Programs] (Windows XP). • A list of installed programs appears. 2 Select [Canon XF MPEG2 Decoder].
Saving Clips to a Computer 4 Click [Install]. 135 5 Select the installation method and then click [Next]. 6 Read the license agreement and click [Agree]. • If you do not select [Agree], you cannot install the software. • If you selected the [Easy Installation] installation method, skip to step 8. 7 Select the software to install and then click [Next].
Saving Clips to a Computer 8 Click [Next] to begin the installation. 136 • When the installation has completed, [Installation has finished.] appears. 9 Click [Finish] and then remove the CD-ROM from the computer. Uninstalling the Software 1 From [Applications], open [Canon Utilities]. 2 Move [Canon XF Utility] to the [Trash]. Uninstalling Canon XF Plugin for Final Cut Pro Move the following file to [Trash]. /Library/Application Support/ProApps/MIO/RAD/Plugins/CanonXF.
Saving Clips to a Computer Viewing the Software Instruction Manuals For details on using the software, refer to the instruction manual (PDF file) of each module. The instruction manuals are installed with the software. For computers running Windows, Adobe® Reader® is required. 137 Viewing the Canon XF Utility Instruction Manual Windows: 1 From the Start menu, select [All Programs] Instruction Manual].
7 Photos 138 Taking Photos You can take photos when the camcorder is in mode or you can capture a photo from a clip when the camcorder is in mode. Photos are saved onto the SD card. In mode, photo size is 1920x1080*. In mode, photo size depends on the resolution setting of the clip that the photo is captured from. If the clip is 1920x1080 or 1440x1080, the photo size is 1920x1080. If the clip is 1280x720, the photo size is 1280x720.
Taking Photos IMPORTANT • Observe the following precautions while the SD card access indicator is flashing. Failure to do so may result in permanent data loss. - Do not disconnect the power source or turn off the camcorder. - Do not remove the SD card. NOTES • If the LOCK switch on the SD card is set to prevent writing, you will not be able to record a photo. Change the position of the LOCK switch in advance.
Photo Playback Photo Playback You can view the photos that you took with the camcorder. 140 Operating modes: Displaying the [Photos] Index Screen Display the [Photos] index screen to view photos. 1 Hold down the button on the d switch and move it to MEDIA. • The camcorder switches to appears. mode and the clip index screen 2 Press the INDEX button. • The index screen selection menu appears. 3 Select [Photo Index] and then press SET. • The [Photos] index screen appears.
Photo Operations Photo Operations You can use the photo menu to protect or unprotect a photo, delete a photo, or copy a custom picture file embedded in a photo. You can display the photo menu from the [Photos] index screen or photo playback screen. Using the Photo Menu 1 From the [Photos] index screen, select a photo and then press SET. • If you are viewing a photo, simply press SET. • The photo menu appears. Available functions depend on the photo’s settings.
Photo Operations Deleting All Photos [J Other Functions] 1 Open the [Delete All Photos] submenu. [J Other Functions] [Delete All Photos] 142 [Delete All Photos] 2 Select [OK] and then press SET. • All of the photos on the SD card will be deleted. • Select [Cancel] instead to cancel the operation. • While the photos are being deleted, you can press SET to cancel. 3 When the confirmation message appears, press SET. IMPORTANT • Be careful when deleting photos. Deleted photos cannot be recovered.
Photo Operations 5 Select [OK] and then press SET. • The selected photo is protected and h appears next to the photo’s thumbnail. • Select [Cancel] instead to cancel the operation. • If a custom picture file is embedded in the photo, it is also protected. IMPORTANT • Initializing an SD card will permanently erase all the data it contains, including protected photos and custom picture files. Copying Custom Picture Files You can copy to the camcorder a custom picture file embedded in a photo.
Photo Operations Photo Numbering 144 Photos are automatically assigned consecutive numbers from 0101 to 9900, and stored on the SD card in folders containing up to 100 photos. Folders are numbered from 101 to 998. You can select the photo numbering method to be used. The photo number indicates the name and location of the file on the SD card. For example, a photo numbered 101-0107 is located in the “DCIM\101CANON” folder as the file “IMG_0107.jpg”. [J Other Functions] [Photo Numbering] [Continu.
8 Additional Information 145 Menu Options For details about how to select an item, refer to Using the Menus (0 28). For details about each function, see the reference page. Menu items without a reference page are explained after the tables. Setting options in boldface indicate default values. Menu items not available appear grayed out.
Menu Options Menu item [Zoom] 146 Submenu Setting options 0 [Speed Level] [Fast], [Normal], [Slow] 64 [Soft Zoom Control] [Both], [Stop], [Start], [Off] – [Grip Rocker] [Constant], [Variable] [Constant Speed] 64 1-16 (8) [Handle Rocker] [Off], 1 - 16 (8) 65 [Wireless Controller] 1-16 (8) 65 [Focal Length Guide] [Set To 0], [Off] 96 [Tele-converter] [6.0x], [3.0x], [1.
Menu Options Menu item [Black Gamma] [Low Key Satur.] [Knee] [Sharpness] Submenu -50 to 50 (0) [Range] -5 to 50 (0) [Point] -1 to 50 (0) [Enable] [Off], [On] [Level] -50 to 50 (0) [Enable] [Off], [On] [Automatic] [Off], [On] [Slope] -35 to 50 (0) [Point] 50 to 109 (95) [Saturation] -10 to 10 (0) [Level] -10 to 50 (0) [H Detail Freq.
Menu Options Menu item [White Balance] 148 [Color Correction] Submenu -50 to 50 (0) [G Gain] -50 to 50 (0) [B Gain] -50 to 50 (0) [Select Area] [Area A Setting] [Area A Revision] [Area B Setting] [Area B Revision] [Other Functions] [Setup Level] 0 Setting options [R Gain] 105 [Off], [Area A], [Area B], [Area A&B] [Phase] 0 to 31 (0) [Chroma] 0 to 31 (16) [Area] 0 to 31 (16) [Y Level] 0 to 31 (16) [Level] -50 to 50 (0) [Phase] -18 to 18 (0) [Phase] 0 to 31 (0) [Chroma] 0 to 31
Menu Options [N Video Setup] menu Menu item 0 Setting options [SDI Output] (b only) [HD], [SD], [Off] 127 [Component Output] [HD], [SD] 127 [HD Onscreen Disp.] [On], [Off] [SD Onscreen Disp.
Menu Options Menu item [Markers] 150 Submenu [On], [Off] N – [Center] [White], [Gray], [Off] N – [Horizontal] [White], [Gray], [Off] N – [Grid] [White], [Gray], [Off] N – [Safety Zone] [White], [Gray], [Off] N – [Safety Zone Area] [80%], [90%], [92.5%], [95%] N – [Aspect Marker] [White], [Gray], [Off] N – [Aspect Ratio] [4:3], [13:9], [14:9], [1.66:1], [1.75:1], [1.85:1], [2.
Menu Options [Metadata Display]: Displays the date and time of recording and/or the camera data (shutter speed, aperture value, gain) during playback. [Audio Level]: Displays the audio level meter when set to [On]. [Custom Display 1] settings [Zoom Position]: Controls when the zoom indicator appears. [Always On]: Always appears on the screen. [Normal]: Appears only when operating the zoom.
Menu Options [SD Card Status]: Controls when the SD card status indicator appears. [Normal]: Always appears on the screen. [Warning]: Appears only when there is a warning. 152 [Bit rate/Resolution]: Displays the bit rate and resolution when set to [On]. [Frame Rate]: Displays the frame rate when set to [On]. [Character Rec]: Displays the character recording warning icon (h) when set to [On], indicating that the onscreen displays will be recorded on the clip.
Menu Options Menu item [Clock Set] [WFM (LCD)]1 Submenu 0 Setting options [Date/Time] – N N [Date Format] [YMD], [YMD/24H], [MDY], [MDY/24H], [DMY], [DMY/24H] N N [Setting] [WFM], [Edge Mon.
Menu Options Menu item 154 Submenu [Cancel], [OK] [Rec Review] [Entire Clip], [Last 4 sec] [Set Metadata] 0 Setting options [Delete All e Marks] – N5 118 N – 87 [User Memo] [Off], list of user memo files [Country Code] Letters A to Z, numbers 0 to 9, plus sign (+), minus sign (-), colon (:), space N [SDI Rec Command] (b only) [On], [Off] N – – [Photo Numbering] [Reset], [Continu.
Menu Options [Tally Lamp]: Allows you to set whether the front and rear tally lamps illuminate while the camcorder is recording. [Media Access LED]: Allows you to set whether the CF card access indicators or the SD card access indicator illuminates while the camcorder is accessing a CF card or SD card. [Title Prefix]: Determines the first 2 letters of the clip name. Combined with the [Number Setting] setting, this constitutes the 6-character clip name.
Displaying the Status Screens Displaying the Status Screens You can use the status screens to check the camcorder’s various recording- and playback-related settings. You can also output the status screens on an external monitor. 156 Operating modes: 1 Set an assignable button to [Status] (0 97). 2 Press the assignable button. • The status screen most recently displayed will appear unless you turned off the camcorder or changed the operating mode.
Displaying the Status Screens [Camera] Status Screen ( mode) 157 1 2 3 4 5 6 7 1 2 3 4 5 6 Gain (0 54) Gain limit (0 54) Autofocus mode (0 50) Soft zoom control (0 146) Grip zoom rocker setting (0 64) Zoom speed of handle zoom rocker (0 65) 8 9 10 11 12 7 8 9 10 11 12 Flicker reduction (0 57) Focus limit (0 52) Face AF (0 51) Zoom speed level (0 64) Zoom speed of grip zoom rocker (0 64) Zoom speed of wireless controller (0 65) [Buttons/Remote] Status Screen 1 2 1 3 1 2 * In Assignable buttons 1
Displaying the Status Screens [Audio] Status Screen In mode 158 1 2 3 4 5 6 7 In 8 9 10 11 12 mode 13 7 1 2 3 4 5 6 7 Built-in microphone low-cut filter (0 77) Built-in microphone sensitivity (0 77) XLR terminal recording channel (0 79) Sensitivity of microphones connected to XLR terminals (0 79) Audio limiter (0 81) Audio output delay (0 129) Audio output level of the AV terminal (0 130) 8 9 10 11 12 13 Microphone attenuator (built-in microphone and microphone connected to MIC terminal) (0 78) L
Displaying the Status Screens [Video] Status Screen 159 1 2 3 1 2 3 4 * In 4 5 6 7 8 9 HDMI OUT terminal status (0 127) HD/SD SDI terminal output setting (b only, 0 127) Superimposing onscreen displays to HD output (0 128) HD/SD COMPONENT OUT terminal output status (0 127) 5 9 Superimposing onscreen displays to SD output (0 128) SD output setting (0 125) Special recording mode* (0 88) Number of frames for interval recording mode (0 88) or frame recording mode* (0 89) Interval length for interval r
Displaying the Status Screens [Battery/Hour Meter] Status Screen 160 1 2 3 4 5 1 2 3 Remaining recording time Remaining recording time indicator Battery life indicator [X Data 1/3] Status Screen ( 4 5 Total operation time (0 155) Operation time since using [Reset Hour Meter] (0 155) mode) 10 1 2 3 4 5 6 7 8 1 2 3 4 5 6 Custom picture file name (0 99) Gamma (0 102) Master pedestal (0 102) Master black RGB levels (0 103) Black gamma settings (level, range and point) (0 103) Knee settings (automatic
Displaying the Status Screens [X Data 2/3] Status Screen ( mode) 161 1 2 3 4 5 6 7 1 2 3 Sharpness settings (level, horizontal detail frequency, horizontal/vertical detail balance, and limit) (0 104) Sharpness settings (knee aperture, gain and ingredient ratio) (0 104) Level depend settings (level, slope and offset) (0 104) [X Data 3/3] Status Screen ( 4 5 6 7 Coring settings (level, offset, curve and depth) (0 104) Noise reduction (0 104) Color matrix settings (select, gain and phase) (0 105) Colo
Troubleshooting Troubleshooting If you have a problem with your camcorder, refer to this section. Consult your dealer or a Canon Service Center if the problem persists. 162 Power source The camcorder will not turn on or it turns off by itself. - The battery pack is exhausted. Replace or charge the battery pack. - Remove the battery pack and reattach it correctly. Cannot charge the battery pack. - The temperature of the battery pack is outside the charging range.
Troubleshooting Playback Cannot delete a clip. - You cannot delete clips with an e mark. Remove the e mark (0 118) to delete the clip. Deleting clips takes longer than usual. - When the CF card contains a large number of clips, some operations may take longer than usual. Save your clips (0 131) and initialize the CF card (0 37). Cannot delete a photo. - The photo is protected. Remove the protection (0 100). - The LOCK switch on the SD card is set to prevent accidental erasure.
Troubleshooting Horizontal bands appear on the screen. - This is a phenomenon typical of CMOS image sensors when recording under some types of fluorescent, mercury or sodium lamps. To reduce the symptoms, set [Camera Setup] [Flicker Reduction] to [Automatic] (0 57) or set the shutter speed to 1/100 (0 56). This is not a malfunction. 164 Audio cannot be recorded. - The AUDIO IN switch is not set correctly (0 77). - An external microphone connected to the XLR terminal requires phantom power.
Troubleshooting There is no sound from the external monitor. - When connecting the camcorder to an external monitor using the CTC-100/S Component Cable, make sure to connect also the audio connections using the white and red plugs of the optional STV-250N Stereo Video Cable. The camcorder is connected using a commercially available HDMI cable, but there is no picture or sound from the external monitor. - Disconnect the HDMI cable and then restore the connection or turn the camcorder off and then on again.
Troubleshooting 166 CF A/CF B Number of clips already at maximum - The CF card already contains the maximum number of clips (999 clips). Replace the CF card or use the CF card in the other CF card slot. - Because both CF cards reached the maximum number of clips, double slot recording is not available. • During double slot recording, both “CF A” and “CF B” will appear in the message. CF A/CF B Operation canceled. - The file control information is corrupt.
Troubleshooting File name error - The folder and file numbers have reached their maximum value. Set [Other Functions] and delete all the photos on the SD card (0 141) or initialize it (0 37). [Photo Numbering] to [Reset] Invalid operation - The following operations cannot be performed. • Adding a shot mark to a frame that already has a shot mark or to a clip in frame recording mode or interval recording mode.
Handling Precautions Handling Precautions Camcorder 168 Be sure to observe the following precautions to ensure maximum performance. • Do not carry the camcorder by the LCD panel. Be careful when closing the LCD panel. • Do not leave the camcorder in places subject to high temperatures (like the inside of a car parked under direct sunlight), or high humidity. • Do not use the camcorder near strong electromagnetic fields such as above TVs, near plasma TVs or mobile phones.
Handling Precautions Long-term storage • Store battery packs in a dry place at temperatures no higher than 30 °C (86 °F). • To extend the battery life of the battery pack, discharge it completely before storing it. • Charge and discharge all your battery packs fully at least once a year. 169 Always attach the battery terminal cover. Do not allow any metal objects to touch the terminals (figure 1), as this can cause a short circuit and damage the battery pack.
Handling Precautions • SD cards: SD cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the card’s content. To write-protect the SD card, set the switch to the LOCK position. 170 LOCK switch Built-in Rechargeable Lithium Battery The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings.
Maintenance/Others Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens and Instant AF Sensor • If the lens surface or Instant AF sensor is dirty, autofocus may not work properly. • Remove any dust or dirt particles using a non-aerosol type blower brush. • Use a clean, soft lens-cleaning cloth to gently wipe the lens using commercially available cleaning fluid for eyeglasses.
Optional Accessories Optional Accessories The following optional accessories are compatible with this camcorder. The availability differs from area to area.
Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc.
Optional Accessories c Bit rate 50 Mbps Usage time BP-925 BP-955 BP-950G BP-970G BP-975 Viewfinder 195 min. 405 min. 415 min. 580 min. 620 min. LCD screen 195 min. 400 min. 410 min. 570 min. 605 min. Viewfinder 125 min. 260 min. 265 min. 370 min. 385 min. LCD screen 120 min. 255 min. 260 min. 365 min. 380 min. Playback LCD screen 280 min. 580 min. 595 min. 830 min. 880 min. Recording (maximum) Viewfinder 195 min. 405 min. 415 min. 580 min. 620 min.
Optional Accessories TL-H58 Tele-converter This Tele-converter lens increases the focal length of the camcorder lens by a factor of 1.5. 175 Protect Filter 58 mm, ND4-L Filter 58 mm, ND8-L Filter 58 mm Neutral density and MC protector filters help you to control difficult lighting conditions. VL-10Li II Battery Video Light This video light enables you to record brightly in color even in dark places.
Optional Accessories Product Codes 176 Provided accessories: CA-930 Compact Power Adapter DC-930 DC Cable BP-925 Battery Pack SS-1200 Shoulder Strap WL-D6000 Wireless Controller D85-2010-000 4590B001AA D85-1942-000 D81-1570-000 D83-0780-000 Optional accessories: BP-955 Battery Pack BP-975 Battery Pack BP-950G Battery Pack BP-970G Battery Pack CA-920 Compact Power Adapter DC-920 DC Coupler DC-930 DC Cable CB-920 Car Battery Adapter IFC-400PCU USB Cable WD-H58W Wide-converter TL-H58 Tele-converter TA-100
Specifications Specifications XF105 / XF100 System • Recording System Movies: Video compression: MPEG-2 Long GOP; Audio compression: Linear PCM, 16 bits, 48 kHz, 2 channels File type: MXF Photos: Image compression: JPEG DCF (Design rule for Camera File system), compatible with Exif Ver. 2.
Specifications • Iris: Auto or manual setting • Gain: Auto (AGC) or manual (-6.0 dB to 33.0 dB, fine-tuning available) 178 • Shutter speed: Auto, speed, angle, clear scan or slow shutter mode, off; 1/4 sec to 1/2000 sec (when [Frame Rate] is [24P]: 1/3 sec to 1/2000) • Minimum Illumination: 0.11 lux (CAMERA switch set to M (manual), [Frame Rate] at [60i], gain at 33 dB, shutter speed at 1/4) • Subject Illumination Range: 0.
Specifications • b GENLOCK/TC Terminal BNC jack As GENLOCK terminal Input only: 1 Vp-p/75 Ω As TC (time code) terminal Input: 0.5 V - 18 Vp-p/10 kΩ Output: 1 Vp-p/75 Ω • REMOTE Terminal ∅ 2.5 mm stereo mini-jack • USB Terminal mini-B, USB 2.0 (Hi-Speed USB) Power/Others • Power supply (rated) 7.4 V DC (battery pack), 8.4 V DC (DC IN) • Power consumption (Recording at 50 Mbps with AF on, viewfinder/LCD screen normal brightness, SDI output off) b Viewfinder: 6.3 W, LCD screen: 6.4 W c Viewfinder: 5.
Specifications BP-925 Battery Pack • Battery type Rechargeable lithium ion battery, compatible with Intelligent System 180 • Rated voltage 7.4 V DC • Operating temperature 0 – 40 °C (32 – 104 °F) • Battery capacity Typical: 2,600 mAh Minimum: 19 Wh / 2,450 mAh • Dimensions (W x H x D) 38.2 x 43.5 x 70.5 mm (1.5 x 1.7 x 2.8 in.) • Weight 130 g (4.6 oz) Weight and dimensions are approximate. Errors and omissions excepted. The information in this manual is verified as of November 2010.
Index 181 A Abroad, using the camcorder . . . . . . . . . . . . . .171 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .172 AE level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 AGC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 AGC limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Aperture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Aspect ratio . . . . . . . . . . . . . . . . . . . . . . . . . . .
I Image stabilizer . . . . . . . . . . . . . . . . . . . . . . . . .53 Index screens Changing clip thumbnail . . . . . . . . . . . .123 Clips . . . . . . . . . . . . . . . . . . . . . . . . . . .110 Expand clip . . . . . . . . . . . . . . . . . . . . .122 Shot marks . . . . . . . . . . . . . . . . . . . . .121 Infrared recording . . . . . . . . . . . . . . . . . . . . . . .93 Initializing recording media . . . . . . . . . . . . . . . . .37 Interval recording mode . . . . . . . . . . . . . . . . . . .
U X USB terminal . . . . . . . . . . . . . . . . . . . . . . . . . . .20 User bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 User memo . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 XLR terminals . . . . . . . . . . . . . . . . . . . . . . . . . . 77 V Video configuration . . . . . . . . . . . . . . . . . . . . . .46 Video output configuration . . . . . . . . . . . . . . . .124 Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Z Zebra pattern . .
USA CANON CONSUMER DIGITAL VIDEO PRODUCTS LIMITED WARRANTY FOR THE UNITED STATES 184 The limited warranty set forth below is given by Canon U.S.A., Inc. ("Canon USA") with respect to Canon Consumer Digital Video Products (the "Products")* purchased in the United States. Warranty coverage is subject to the country where the unit was purchased. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
CANADA CANON CONSUMER DIGITAL VIDEO PRODUCTS LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. ("Canon Canada") with respect to Canon Consumer Digital Video Products (the "Products") purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for these Products to a Canon Service Facility when repairs are required.
USA CANON U.S.A., INC. NEW JERSEY OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA CANON U.S.A., INC. CHICAGO OFFICE 100 Park Blvd., Itasca, IL 60143 USA CANON U.S.A., INC. LOS ANGELES OFFICE 15955 Alton Parkway, Irvine, CA 92618 USA CANON U.S.A., INC. HONOLULU OFFICE 210 Ward Avenue, Suite 200, Honolulu, Hl 96814 USA ❖ If you have any questions, call the Canon U.S.A. Information Center toll-free at 1-800-828-4040 (USA only). CANADA CANON CANADA INC.
