Camcorder User Manual

Recording

 With the custom function [LANC AE SHIFT] ( 97), you can change the function of the AE SHIFT

dial on the optional ZR-2000 Zoom Remote Controller and use it to change the aperture value.

Push AE

In M Manual mode you can use the Push AE function

when you want the camcorder to re-establish optimal

exposure settings by automatically adjusting the

aperture and gain (if the AGC switch is set to ON).

Press the PUSH AE button and hold it pressed

down.

• The camcorder will adjust the aperture value and gain

to achieve optimal exposure ( mark above the

exposure indicator).

• After you release the button, the aperture value and gain (if the AGC switch is set to ON) set by the

camcorder will override the previous settings made in M Manual mode.

You can use the custom keys ( 73) or the [SYSTEM SETUP/ ] [E.LCK B.LCK] setting to

prevent the accidental operation of the PUSH AE button.

PUSH AE

button