Instruction manual
Preparation
22
E
Loading a Cassette
1. Make sure that you have inserted a power source.
2. Slide the EJECT 5 button across to release the cover.
• Wait a couple of seconds for the cassette compartment to open automatically.
3. Load or unload the cassette.
• Insert the cassette gently with the window facing out.
• Remove the cassette by pulling it straight out.
4. Press the P mark on the compartment until it clicks.
5. Click the cover back into place.
* D is a trade mark.
Notes:
• After loading a cassette, use record search (p. 45) to find the point where you want to start recording.
• Do not interfere with the cassette compartment while it is opening or closing automatically, or attempt to
close the cover.
• Do not leave the cassette in the camera after use — return it to its case and store it in a cool, clean, dry
place.
• Close the inner door before closing the outer door.
EJECT
この部
分
を先に閉じてください。
C
L
O
S
E
T
H
IS
F
IR
S
T
.
この部
分
を先に閉じてください。
この部
分
を先に閉じてください。
Loading and unloading
Use videocassettes marked with the D logo only.*