ZR300 ZR200 Instruction Manual

COMMUNICATION

ERROR

The printer is experiencing a data transmission error. Cancel printing,

disconnect the USB cable and turn off the printer. After a while, turn the

printer back on and reconnect the USB cable.

Or, you attempted to print from a memory card that contains a large

number of images. Reduce the number of images.

PRINTER IN USE The printer is in use. Check the printer status.

PRINTER WARMING UP Printer is warming up. If the message does not disappear after a few

seconds, check the printer status.

PAPER LEVER ERROR Paper lever error occurred. Adjust the paper selection lever to the proper

position.

PRINTER COVER OPEN Close the printer cover securely.

NO PRINTHEAD No print head is installed in the printer or print head is defect. Refer to the

instruction manual of your printer.

Message Explanation