Manual

104

1. Turn the POWER switch to OFF.

• When removing the memory card, make sure the card access indicator is off.

2. Open the memory card compartment cover in the direction of the

arrow.

3. Insert or remove the memory card.

• Push the memory card all the way in.

• Remove the memory card by pushing the card in and letting it spring out.

[ Do not attempt to pull the memory card out without first pushing it in. I

4. Close the cover.

• When inserting the memory card, do not attempt to close the cover

forcefully without the memory card properly inserted.

[] Notes:

• When you set the camcorder to CARD PLAY (VCR) mode, the last image

recorded appears. If there are no images recorded on the memory card, NO

IMAGES appears in the display.

• Do not touch the memory card terminals.

Select the quality of a still image to be recorded.

m÷m, m÷m

MENU ,cA.o SETUP ])) ,OUALITY..... FI.E

( _ 40)

To change the image quality, open the menu and select CARD SET

UP. Then select QUALITY, set it to STANDARD and close the menu.