Manual
[] The PHOTO button doesn't work.
[] The image cannot be erased.
• The memory card is not loaded
( [23104).
• You are using an SD Memory Card and
it is set for erasure prevention. Change
the position of the protect switch.
• The memory card is full. Erase
images ([223114) or insert a new
memory card.
• You have reached the maximum file
number. Set the file numbering to
RESET through the menu ([2121106)
and insert a new memory card.
• You are using an unformatted
memory card. Format the card
(_1 126).
• The image is protected ([_Z1113).
• You are using an SD Memory Card
and it is set for erasure prevention.
Change the position of the protect
switch.
€=
7.2
"o
"o O
<_z
144
Problem
[] The wireless controller doesn't
work.
[] The power indicator is flashing.
[] The camcorder malfunctions.
[] The DV cable is connected
correctly, but there's nothing in
the display.
[] The camcorder becomes warm
during use.
Cause and/or what to do about it
• The remote sensor mode is set to
OFF((/(N3in the menu ( _ 50).
• The remote sensor modes of the
wireless controller and the camcorder
itself are different ( _ 50).
• The batteries are dead or not inserted.
o
o
Check the screen displays ([_21149).
External interference may cause the
camcorder_ microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source.
• Remove the cable and then reconnect
it or turn the power off and back on
again.
• This is not a malfunction.