Manual

6. Remove the battery pack after use.

• Rotate the viewfinder upwards.

• Press and hold the BATT. RELEASE button while you slide the battery up.

[] Notes:

• Never connect an unspecified product to the camcorder_ DC termhtal.

Likewise, do not connect the power adapter to an unspecified product.

• You can find detailed notes for using the batteries in the Notes on Using the

Batteries"( 1_133). These notes include charging and recording times and how

to install the backup battery.

;iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!jj_i

Specifications

Power supply 100;g40V AC, 50/60 Hz

Power consumption 34 W

Rated output 9.5 V, 2.7 A DC

Operating temperature range 32°F_04°F (0°C40°C)

Dimensions 2 1/4N 1 1/8M4 ]/s in (57 × 28 × 104 mm)

Weight 6 3/s oz (180 g) (without power cable)

Weight and dimensions are approximate.

Errors and omissions excepted.

Subject to change without notice.

When replacement of power supply is required, please return it to the

responsible nearest Canon Service Center and please replace it with the same

type number CA-560 or equiva ent.

The Adapter can be used with a power supply between 100 and 240 V AC. For

areas where 120 V AC power is not used, you will need a special plug adapter.

Contact your nearest Canon Service Center for further information.