Manual
• If yourecordinmorethanonemodeonthesametape,thepicturemaybecome
distortedduringplaybackandthetimecodemaynotbewrittencorrectly.
• AtaperecordedinLPmodeonotherdigitalequipmentmayproducethe
mosaic-likenoiseandthesoundmaybecomedistortedwhenplayingbackon
thiscamcorder.
• AtaperecordedinLPor rtLp mode on this camcorder may produce the
mosaic-like noise and the sound may become distorted when playing back on
other digital equipment.
fl$NIi_About []SP and PJLP modes
• The image quality of recordings done in ItSP or rtLp modes will be lower
than that of those done in SP or LP modes.
• A cassette recorded in rtsp or mLP mode cannot be played back on a
camcorder not equipped with that mode.
• The recording mode might not appear in the display correctly if you switch to
MSP or r'tLP while the camcorder is connected to another digital video device.
• When the recording mode is changed to raSP or mLR the camcorder modifies
the image for appropriate recording in that mode.
• You might not be able to do DV dubbing correctly with the camcorder set to
rasp or raLp mode.
• You cannot transfer images recorded in raSP or mLP mode to a PC (as of ._
January 2002). _
mg
g=
Produces images in the 16:9 format for
playback on wide screen TVs.
F
MENU ,CAM.SETup _)1,'16:_
OFF
( I_ 40) L
To switch 16:9 to ON, open the menu and select CAM.SET UP. Then
select 16:9, set it to ON and close the menu.
[] Notes:
• _6:9'_s shown in the display when you switch the 16:9 mode on.
• You cannot use the 16:9 mode with the Easy Recording program.
• You cannot use the multi-image screen when setting the 16:9 mode on.
• If you play back a recording made for 16:9 on a normal TV screen, the image
will appear to be vertically _quashed"(compressed).
• If you connect the camcorder to a TV with an S1 terminal or the Video ID-1
system, recordings made in the 16:9 mode for wide screen TVs will
automatically play back in wide screen mode on the TV screen.
23