Manual
C
"- '3
You can use the LCD screen for instant, on-the-spot playback. The camcorder also
plays back the sound track via the built-in speaker ([212133).
• When you play back a tape, you can also close the LCD panel with its screen
side facing up.
• When youfe using the viewfinder to view playback, close the LCD panel.
To play back your recordings on a TV, see p. 34.
To use the wireless controller, see p. 49.
[] Note:
• To avoid accidental recording, make sure that you slide the tab on the cassette
so that it exposes the hole (the switch position is usually labeled SAVE or
ERASE OFF).
L Attach a power source and turn the POWER switch to PLAY
(VCR).
• The power indicator lights up.
2. Make sure the TAPE/CARD switch is set to TAPE.
3. Load the cassette.
4. Press the _ (play) button to start playback.
• To end playback, press the • (stop) button.
• To wind the tape forwards, stop playback and press the _1_ (fast forwaN)
button.
• To wind the tape backwards, stop playback and press the _ (rewind)
button.
• If the playback picture is rough (mosaic-like noise), clean the video heads
using a Canon DVM-CL Digital Video Head Cleaning Cassette or a
commercially available digital video head cleaning cassette.
30