Manual

The highly sensitive Directional Stereo Microphone DM-50 has been designed

exclusively for camcorders equipped with an advanced accessory shoe .ol_°°. It is

dubbing ( _ 97).

Refer to the DM-50's instructions for further details.

Turn the camcorder's power off before attaching/removing the microphone.

1. Slide the microphone onto the accessory shoe and tighten with the

shoe lock. :0 c

• Slide in the direction of the arrow on the bottom of the microphone until it _ _.

clicks securely into place. ¢

• Make sure that the microphone does not come disconnected when turning o

the shoe lock. _

2. Set the eamcorder to TAPE CAMERA mode. _ =

• 1_ (Connection) appears in the display.

3. Set the microphone's directivity switch.

SHOTGUN: Clearly picks up sound arriving from the front of the microphone

(monaural).

STEREOI: Picks up sound arriving from the front of, as well as sound

surrounding the microphone.

STEREO2: Picks up sound surrounding the microphone in a wider range than

STEREO 1.

[] Notes:

• Never carry the camcorder holding the microphone.

• The DM-50 will not pick up any sound if another microphone is attached to the

camcorder's microphone terminal.